IT'S DEMO DAY!!!!

First, I blame it all on my realtor, John. He was the one who pointed out that my little entry was a bit "tight." Seriously, up until then I never really noticed it, but once it was pointed out I have done nothing but obsess about it for over a year.

Then there is Chip Gaines...yes, Chip from "Fixer Upper." He always seems so pumped about demo day! And if he can demo an entire house in one day, how hard could it be to demo one little ole' closet?

Both of them should come give me a massage and hold the ice pack on my injured leg...and bruised arm...and wrenched back. When a 52 year old woman falls off a ladder onto the stairs and a 2x4 with 12 penny nails sticking out of it, there is going to be some pain!

Not that I don't demo all the time...I am forever having to rip up subfloors at the older apartments. People let water rot bathroom floors and then there are the animals tenants are trying to hide, so they never take them outside. One guess as to where they do their "business." Trust me, there is NOTHING that will get months of animal urine out of wood subfloors!

The difference is, this is my home. And I live here and I don't want all the saw dust and sheet rock dust and mess all over the house.

Want in one hand, poo in the other...see which gets full faster. (Again, dad's words of wisdom!)

So my plan was to remove the entry coat closet. Seriously, NO ONE in this family hangs their coats in that closet...it was filled with stuff that had not seen the light of day for YEARS!

After obsessing over this for over a year, I was pretty sure I knew exactly what I wanted to do and how I was going to do it. But as with all projects, there are always the unexpected. Like that pesky electrical wiring that feeds the light switches and the living room fan. Matt and I discussed wrapping it in Washi tape and starting a new "trend" by leaving them hanging.

But I am not a trend setter so I moved the wiring. A few other small issues....I can't get the outlet wire down the outside wall because of the insulation and the wires for the switches are too short so I will have to create a "junction box" in the attic and run new, longer wiring.

I also discovered that the "header" for the opening actually sat on the outside corner of the closet. This means I have to crawl up in the attic and scab in a new header. Curses. Is it a "must do?" Kinda...since the roof rafters and wall framing all sit on that header and it now is just suspended in mid-air with no support...yeah, I kinda have to do something with it.

OH. MY. GOODNESS! I think home remodeling is like giving birth...you forget what a nightmare it can be. If we REALLY remembered the pain and hassle we would only have one kid and NEVER do any remodeling to our homes!

Sooooo, after two days of back breaking work, all I have to show for it are a few missing walls and a bunch of short wires hanging out of the wall. And of course dust and insulation ALL over my house!!!

One thing I have always wanted is an entry space that would allow me to "stage" a little table. It just so happens I recently acquired a small walnut table that was once my grandparent's. While it is not really "my style" it is my first love on two fronts...an heirloom piece and walnut. It will fit perfectly in this space if I ever get it finished!

I am mulling over installing board and batten on the walls, but I know without a doubt I want travertine tile on the floors. Hardwood is NOT something you want next to an exterior door!

Once this project is finished, but before the new flooring, I want to make some modifications to my stairway.

This is my "inspiration" from Remodelaholics!

I am not going to rebuild the post or change the stain...just expand the bottom 2 steps and move the post up. Simple project...remove the post, replace the bottom two treads with wider boards, cut down the bannister and remove a few newel posts, reinstall the post, stain it all to match. No biggy. HA!!!!

Eventually I want to paint the living room walls and restain the treads, risers and railings....but that's a whole nuther project!!

But it is progress. This kind of mess and disorder would have driven me nuts years ago, but I am coming to terms with the fact that I can't move as fast as I use to

Hopefully next week I will have a finished project to share...but no promises!

Info

2 Comments

Simple makeovers for the worst offenders...the KSTP treatment!

There is NO excuse for ugly furniture. With warmer weather just around the corner, it is time to start looking at your furniture with a critical eye and making a list of pieces that CAN be changed with just a little bit of work!

We all have it...those "cheapo" pieces of furniture that are, at the very least, offensive! Maybe they were given to you, maybe you bought them at a "discount" store...maybe you bought it at the thrift store to fill space in a room.

Pressed board construction, laminate tops, dated finishes, pieces you put together with a little allen wrench thingy that came with the worthless little "screws" that promptly strip out and leave the piece wobbly and worthless!

It's ugly and cheap, but seriously who has the money to buy "real wood" furniture when you are struggling from pay check to pay check and having to buy shoes for a kid whose feet seem to grow a size every month.

I get it...I've been there. Fortunately I have learned to shop resale and auctions for "quality" pieces...and even if they need a little TLC, I have the tools, knowledge and time. But not everyone has that...or the money to buy and refinish high quality pieces.

That is why I advocate the KSTP treatment. Let me explain....

First, before you even get to the KSTP treatment, ALWAYS give the piece a good cleaning. On the nastiest, I use ammonia water but some can just be wiped down with a little water and mild detergent. Whatever you need to do to get the gunk off the piece! If it is "stuck" on just scrape it off with a razor! No matter if you scratch the finish...you are going to paint it!

Second, make any and all repairs that need to be made...and if you don't know how to repair it properly, google it!

Okay, now the KSTP treatment....

K- Kilz (my favorite primer but any QUALITY PRIMER will do! That is why this is the KSTP treatment and not the PSTP treatment!)

For smaller pieces I use a spray can only because it is easy and gives me a nice smooth finish. On larger pieces I use a brush and 4" foam roller! TIP! Always shake the can longer than the directions recommend. Kilz will spray on with a "grainy texture" if you don't shake the can well! No biggy since you are going to sand anyway, but just makes it a little easier! Also, pay attention to the temperature recommendations...it matters!

Many paints SAY they are a "primer and paint in one." Sorry, I am old school....I ALWAYS prime and I personally recommend it. If you want a superior finish that will hold up to use and abuse, prime!

S-Sand. A 220 grit paper will usually smooth out the piece after it is primed. I wrap a piece around a sanding sponge block!

If you have "ornate" legs or detailing, use 000-0000 steel wool.

USE YOUR HANDS, not your eyes. Feel the piece.

Trust me, if it isn't smooth, it WILL show after you paint it! Sand it until it is smooth to the touch! If you cleaned the piece well, scraped off all the gunk, this step really should only take a few minutes.

T- Tack cloth. A MUST after you sand but before you paint (or apply any finish). Blow or brush off as much as you can, then use a tack cloth!

You can purchase it at your favorite home improvement store...usually in packages of 2 and relatively inexpensive (around $2)! You can wipe a piece down all day with a clean cloth, but you WILL leave "stuff" on the piece if you don't tack cloth it. Tack cloth will remove EVERYTHING. If you still feel "stuff," hit it with the sand paper again and then tack cloth again!

P-Paint. This is where people usually freak out. My favorite for wood or laminate furniture is oil-based but it can be a tricky paint to work with for a novice and difficult to clean up. Fortunately latex paints have come a long way and are much more durable these days! QUALITY spray paint is probably your best bet for smaller pieces. I say quality because you can buy spray paint a tad cheaper at discount stores, but I am not a huge fan of cheap paint for ANY project! I usually buy Valspar or Rust-oleum from Lowe's.

On smaller pieces of furniture the difference will only be a few dollars but will be worth it in the long run.

Each of the brands come in LOTS of great colors...just find the color you love! I have found very little difference between the two brands...the Valspar tends to dry a tad quicker....but both are quality paints! ALWAYS shake the cans well and follow the directions on the can!!!

I have followed every tip in the book to get rid of the occasional "striping" on large, flat surfaces...like dresser tops or table tops. It doesn't seem to matter how I spray, what the temperature is or how hard the wind is blowing...sometimes I get stripes.

My solution has been to purchase the little "sample pots" of paint custom mixed to match the spray paint I am using and roll it on the large flat surfaces with a 4" foam roller!

Penetrol and Floetrol are a MUST any time you roll or brush on paint...oil or latex!

Use it. It will eliminate the brush and roller marks and give you a MUCH smoother finish!

These are just a VERY few projects using the KSTP treatment (I have done hundreds!)....world of difference for a little bit of work! I am working on a piece right now that is in the S stage...primed and sanded but now I need to figure out what color I want to paint it...soon!

Even light fixtures and paddle fans can be spray painted!!! On metal pieces and furniture hardware, I use metal primer primarily for the "rust retardant" factor!

One last important TIP when using ANY technique to paint anything....ALWAYS give the piece time to cure before you put it to work!

I was always skeptical of those "two day" makeovers they did on tv where they would paint something and then "stage" the pieces with all kinds of stuff within hours of putting a final coat on. (Kind of like getting your nails painted at the salon...even though you dry them for 10 minutes, you are still going to ding them if you dig in your purse for your keys! Unless you get gel polish...awesome stuff!) Trust me, that is the fasted way to ruin a finish! Don't do it...be patient and give the paint time to harden (cure) before you set a lamp on it or try to hang the fixture (trust me...I have had to repaint many pieces because of impatience!)

One dated, nasty, cheapo piece of furniture can ruin an entire room. Toss it or paint it! YOU CAN DO IT!

*I have not been compensated for pimping these products! These are the products I use and work for me!!!*

Info

Comment

Mid century chest makeover....

On rare occasions I find a little treasure hidden among all the garbage my tenants leave when they move in the middle of the night! I found this little table years ago and it started my love affair with Lane Acclaim tables....

It did NOT look like this! I remember I picked up the nasty little thing and started to toss it in the back of my truck. But it was sturdy and I could see quality through all the "muck" so I brought it home. I googled the markings on the underside and found that it is a walnut and oak Lane Acclaim table manufactured in 1959. With a lot of elbow grease and a little tung oil, it is now one of my favorite little "treasures." Along with the others I have purchased and restored over the years. Still waiting on the desk and a round end table...but someday...

Now I look at furniture I find a little closer.

This dresser is one of my recent finds. A true mid century piece. Completely intact and sturdy as the day it was built. Unfortunately someone had done a REALLY bad job painting it!

I cleaned it, primed it with Kilz, sanded it and wiped it down with tack cloth....then I painted it with one of my favorite flat "charcoal" greys. The ole' KSTP treatment! The drawers were in mint condition and just needed a little cleaning!

Beautiful! Because of the style, I kept the finish simple. While I hesitate to paint MCM pieces, this is a prime example of "enhancing" a piece.

Now I am going to share a little DIY frustration because I know I make this stuff LOOK easy sometimes. I first painted this entire piece with several cans of Valspar flat spray paint. I like spray paint because I normally get a nice smooth finish. For some reason I kept getting that "stripped" look on the top and sides...the drawers looked fine. Not a problem I normally have with flat finishes when the temperature is decent. I ended up buying a quart of latex flat paint, mixed to match, (and added floetrol...a must!) and used a 4" sponge roller to get a uniform finish. Worth the extra effort!

I know I have said it a thousand times....don't overlook those "ratty old" pieces.....neglected or abused or poorly "restored." With a little bit of your time and attention, they can be beautifully restored and ready for another lifetime of use!

This week I will be sharing this project at...

...love their features and their site!

Info

1 Comment

A simple TV cabinet makeover...

This is the second year in a row I have been sick around Christmas. Fortunately, last year it was AFTER Christmas. This year it was BEFORE Christmas. Not good when I have so much to do the week before Christmas! I knew I felt bad Tuesday when I was out building fence (the wind did a number on my privacy fence at the apartments) but I didn't realize how bad I felt until I came home and sat down.

Now I have a list of things to do...presents to buy, a few things to return, wrapping boxes to hunt down, presents to ship, grocery shopping....and I feel to cruddy to even drag myself into the shower! Fortunately I THINK the worst is over so hopefully I'll feel like getting around later today!

In the meantime, I thought I would share another simple little makeover.

Remember all that dated, uninteresting furniture I keep harping on you to paint or do SOMETHING with! Well, this is just another example of a piece of furniture that no longer has a place or a purpose in our homes...unless you roll up your sleeves and give it a little makeover.

The dreaded old "tv cabinet" ...or "hutch"....or whatever you want to call it!

Here I shared how I acquired this less-than-interesting piece and how I used beaded craft board to start this simple transformation!

I gave the inside a KSTP treatment with my "go to" off-white and gave the outside a little plaster paint/dristress treatment. But it still lacked "character" so I wiped down the entire cabinet with walnut stain. That changed the color from a soft "teal" to almost a "greenish" color but it also added depth to the finish! Kind of a "patina"....

I sealed it all with poly and changed out the hardware. Actually I painted the original round knobs black and added black cup pulls to the bottom drawer! Remember, if you are changing out hardware, you may have to patch some holes BEFORE you paint. In this case I had to do just that since the holes on the bottom drawer were 3" apart and the holes for the cup pulls are 2 1/2"...no biggy! Just patch them with wood filler, sand and then paint....then just drill new holes for the new hardware!

It would be simple to reinstall the doors...but in this case I decided to go with an "open shelf" look!

Simple little update! Now this little cabinet is ready for another season of life!

Info

2 Comments

Updating a little chandelier...

I am almost embarrassed to admit where I got this ugly little brass chandelier....

Out of the back of a strangers pick up truck at the dump. Seriously...I was paying out at the local dump and this guy drove up in a truck loaded with trash. Sitting on top was this light fixture. So I asked him if I could have it...and he said SURE!

Geez...I have become one of "those" people who dig through other people's trash! Crazy cat lady, annoying coupon lady...and now this...(shaking head in disgust)

Whatever...I wasn't sure what exactly I was going to do with it but I knew it could be "updated" if I could just find the right inspiration. I knew I was going to paint the dated brass, so I decided to start there until I could figure out exactly what I wanted to do with the fixture!

Originally I primed it with metal primer, then started painting it with plain ole' off white spray paint. (Remember, when you aren't sure what to do with something, take it to "base neutral.")

And that is when a little DIY project turned into a total disaster. Yes, it happens. Even to me. Even though I shook the spray paint can per the instructions, it still started spraying all "clumpy." I don't know how to describe it, but rather than a nice smooth finish, it was all grainy and rough....AAAAGGGGGHHHHH!

Made me so mad I tossed the fixture in the back of the garage and said "SCREW IT." (Yes, I curse at innate objects!) I knew I was going to have to completely sand it down and considering the "ornateness" of it, I knew it would be a royal pain. My "vision" was just a heap of "mess."

Then I saw this on Pinterest...

Andrea at "Personally Andrea" took a plain ole' chandelier and dolled it up a bit by using jute twine to wrap the ugly little plastic tubes.

Hum....just the "inspiration" I needed to dig the "ruined" chandelier out of the back of the garage and give it another shot!

I sanded down the "grainy" finish, reprimed where needed and then painted it in my current favorite teal spray paint! (This time I shook the crud out of the can AND test sprayed it!)

Covering the ugly plastic tubes is super easy. Andrea used tape, but I used hot glue. I ran a little line of hot glue along the tube as I wrapped it in the jute twine.

WORD OF WARNING!!! Hot glue is HOT...and the plastic sleeves are a tad flimsy so use the glue sparingly or you will actually melt the little tube which will make it impossible to slip back onto the light. (Lesson learned the hard way...fortunately Lowe's sells replacement socket covers for under $3 a pair!)

I think painting the fixture in black or oil-rubbed bronze would have made it a little more "formal." But I was going for "fun" and "hip" and a little more casual!

I liked the look so well I decided to do the same to my dining room fixture using the plastic covers I purchased at Lowes!

I found some glittery gold fabric/paper kinda looking stuff at the craft store that I am going to use to cover new socket covers for the Christmas holiday! I will share that later when I do my Christmas decorating!

Don't turn your nose up at the dated brass fixtures...as I have shared many times fixtures, lamps and fans are super simple to update with a little paint.

And of course a little inspiration! Thanks Andrea!

Info

4 Comments

A few new storage solutions!

In my quest to make my kitchen a tad more "user friendly" I stumbled upon a nifty little storage gadget at Lowes that will help me manage my casserole dishes and mixing bowls a bit better.

As I have mentioned, in my "dream kitchen" I have nothing but big deep drawers in my lower cabinets. Unfortunately that is a "dream" so I have to work with what I have and digging around in a lower cabinet for heavy casserole dishes and keeping all my mixing bowls organized has become an issue.

Again, and I can not stress this enough, the number one key to getting organized is PURGING!

Pull it ALL out and ask yourself...DO I REALLY NEED THIS?! In my kitchen cabinet, I had several casserole dishes that were duplicates of what I have but they didn't have lids. Do not need! I had 5 large 9x13 casserole pans...do not need them all! I had 3 stainless bowls the same size, which made stacking them a impossible...do not need! I have FIVE crock pots...two smaller ones just for dips and such. I DO need those but only once or twice a year so there is no need for them to take up valuable kitchen real estate. So off to the hall pantry they went!

I contemplated building and installing either 4 drawers or 2 large drawers in this cabinet base. Lots of work! So when I found these nifty little metal storage drawers at Lowe's I knew I had found a relatively easy solution.

The problem with these metal drawers is they are not custom sized so I was going to end up with a lot of "dead space." I decided to only install one for my bowls and casserole dishes since those are things I use almost every time I cook. I left the other side shelf space for crock pots and dishes I only use occasionally.

The drawer component lets me easily get to my bowls and casseroles dishes without wallering around on the floor and pulling everything out to get to the stuff in the back.

A perfect, and simple, solution for organizing a tough space.

When Brian and I went scrounging around the flea market out in Tontitown last weekend, I found this neat little wall decor. A framed chalkboard with two "distressed" wire baskets. I knew it would be perfect for organizing magazines that tend to get piled up in the coffee table, which in turn means they get ignored!

I'm pretty sure it is probably something one could pick up at Hobby Lobby, or something I could easily make with an old frame and paper storage racks from an office supply store. But it was there, and it was done...the only thing I did not like was the original finish on the frame...kind of a "white-wash" natural wood looking thing. I immediately painted it with some chalk paint and distressed and sealed it. Great for magazines or mail. Remodelaholics featured a bathroom with a similar one.

I like it in the bathroom but I am of the opinion that if you are in the bathroom long enough to read an article, you probably ought to seek treatment. Just saying....

Last fall I bought this awesome antique sewing machine at an auction. The "lid" flips back to reveal the machine

I immediately fell in love with the little wood box that covered the machine. After a little research I discovered they are called coffins....most often in mahogany or walnut. BEAUTIFUL! I immediately jumped on Ebay and found a few of these amazing little boxes.

Naturally they needed to be refinished, but a little magic mixture and a few coats of tung oil and they are amazing!

My original plan was to use them in the "kitchen reset," but there really was no good place for them so I have them scattered around the house for storage. In the den, I use them to store some of my photo albums. They would be darling with little castors for "rolling" storage. l absolutely love them!

When I reset my kitchen, I dug around in my flea booths looking for "functional decor." In other words, pretty with a purpose! A few things caught my eye.

The first was a little glass pumpkin...perfect for this time of the year! I usually keep my coffee in a crystal decanter, but this little pumpkin is perfect for the fall season.

Now I am going to be on the look out for one I can use for the Christmas season!

I also found this little sterling silver piece. I THINK it might have originally been for sugar since it has a little notch in the lid where a spoon may have rested but most sugar jars are smaller. Regardless, it is the perfect size for my coffee filters.

And of course the need to store 1/2 of my dishes when I built my floating shelves...seriously, who needs 20 plates! I purchased this little basket from Kaufmann Merchantile with a gift certificate from my son but I also found some on Amazon and have ordered 3 for my holiday wrapping station! (I'll share that little project when I get it set up!)

I have mentioned time and again that I really don't decorate much with "pretty" without "function" or purpose...unless something has sentimental meaning.

I am learning that these little touches are what really give a home "character." No need to use boring old plastic containers or cardboard boxes if you can "think outside the box" and find interesting pieces that are "pretty" but can also serve a useful function!

Anything that can make my life more organized is great...the fact that it is pretty or interesting is a huge plus!

Info

2 Comments

The kitchen makeover reveal!

It is time for the big KITCHEN REVEAL!!!

First, I had to wait on the maple trim...then I decided to wait on the new doors and glass!

I had not intended to start decorating for fall before "the big reveal." My plan for this week was to do the glass doors Tuesday, take pictures of the kitchen and get ready for Matt's birthday celebration Wednesday (he turns 26 Saturday!), post the reveal Thursday morning and then get most of the fall decor up and get my hair and nails done ...AND LEAVE FOR COLORADO FRIDAY!!! Yippeee!

One hitch...I got a call Tuesday morning that the glass wasn't on the delivery truck so it wasn't going to be in until Thursday...well that just threw a wrench in my whole week. So Tuesday I started working on my fall decor. Tuesday afternoon, the glass place called and said they "found" my glass and it was ready. Sooooo....short story long, the "reveal" pictures are going to have smatterings of fall!

I think I have mentioned before that I have a bad case of "Pinterest envy" when it comes to kitchens.

Tipsaholic recently featured some beautiful kitchen pantry/storage ideas. I love the painted kitchens and all the open shelving but the one thing I noticed about EVERY picture, whether featuring beautiful glass containers or pull out drawers, was the ORGANIZATION of every item and space.

For me, the key to a great kitchen (or any space for that matter) is making sure everything is organized and functional for MY needs! And of course aesthetically appealing, but unless it is organized and functional, I am wasting my time making it pretty!

While I love all the neat pull-outs and storage inspiration, I think the first thing you need to do BEFORE you start any kitchen remodel is get every drawer and cabinet purged and organized and see what you have, what you need and what space you can rework, organize or add to make your kitchen function for YOU! Plan, plan, plan!

Here is a post on purging and organizing your kitchen drawers! A super simple little project but it has made a big difference in my ability to find stuff I need!

My goal in "resetting" my kitchen was to make it more functional for my purposes.....and of course, change things up a bit aesthetically so I am not tempted to take a paint brush to these beautiful cabinets

I basically had a "standard" (and small) kitchen layout.

I do love stained wood and as drawn as I am to painted cabinets, I knew the day would come in the future when I would regret painting mine. My stain color (Paprika Cherry on Maple) isn't totally offensive and fairly "timeless" if that is possible, unlike my daughter's kitchen which had "pickled oak," a stain my dad and I were putting in houses in the 1990s!! I did not discourage her in the least when they decided to paint their cabinets.

For those who believe "white is classic and will never go out of style" obviously don't remember the "honey oak" trend of the 90s..."oak is classic and will never go out of style!" EVERYTHING goes out of style...eventually! Which is why we are all painting honey oak cabinets!

Earlier this year I made an offer on a smaller house with a smaller yard in a subdivision I would love to live in. The house was basically a "gut job" and the new kitchen I designed had NO upper cabinets...none! I wanted lots of windows, maybe a few open shelves, tons of base cabinets with drawers and a big island.

But that deal didn't work out and I don't have the "footprint" to build a kitchen even remotely close to what I would have put in that house. Right now I don't have the funds (or energy) to make major changes and I can't bring myself to change out appliances that aren't totally offensive and work perfectly fine!

What to do, what to do!? I wanted some changes, but I didn't want to do something I might regret down the road.

This is one of those times when I had to "work with whatcha got" and make changes that would give me a few elements I crave, without spending a ton of money or eating out for 2 months while the kitchen is in complete disarray. In the end I probably spend under $800 (doing the work myself!) and I think we ate out two nights! Keep in mind that the three doors cost around $200 and special order maple trim can be costly. The changes I made would be A LOT cheaper if you use stock trim and don't add new doors!

If you aren't in a position to spend a lot of money on major changes and upgrades but you love the concept of open shelving and more storage, these few changes might just be the answer!

I did not paint my cabinets but I was making changes that required a few pieces of new maple trim the color of the existing. THAT is a Herculian task and one I would advise you do BEFORE you start moving things around...unless you have stock wood like oak or poplar, or intend to paint the cabinets! My kitchen cabinets are 16 years old and honestly even if I knew who, what, and where the odds that they would have trim pieces to match after all these years are pretty slim. I tried finding stock trim that came close, but none was close enough. There are cabinet manufacturers that will do "color matches" but unfortunately they won't do it for a few pieces of trim.

As I have mentioned before, most manufactured cabinets and furniture have a stain and finish that is sprayed on...so matching an existing finish can be pretty difficult! Thank you David, at Sherwin Williams in Springdale...most amazing color match EVER! I honestly can not tell the difference between the original and the new! I took a door and a few samples of the new trim and he matched it right up...amazing!

There were a few things I wanted to accomplish in this little "makeover." First, I knew I wanted open shelving. That is one element I am always drawn to in my quest for "inspiration." (Here I talk about finding your inspiration for ANY project!)

I wanted to "pop up" a few of my cabinets and open a few up for display. In the post featuring my laundry room, I tell you exactly how to "pop up" existing cabinets.

Moving the dish cabinet, spice cabinet and the two cabinets on either side of the refrigerator allowed me to add the open shelving beneath them.

Here you can see a step by step tutorial for constructing three different types of floating shelves!

The frame to the left is just foam board with scanned copied of my grandmother's old recipe cards tacked to it! The boys always gripe about my "shallow" bowls so I pulled a couple Philbe Fire King bowls I had in my booth and then ordered small matching custard cups I found on Ebay for dips and such!

My spices, along with my cooking and serving spoons, are now at my finger tips!

I love all the different glass jars! I painted my old knife block a pretty teal just to freshen it up a bit! I love refinishing and repurposing old cutting boards...this one is perfect for holding recipe cards!

This is now my "baking corner." I added the antique fan for comfort...you can see how easy it was to rewire this 80 year old fan here and bring it back to life!

I choose not to pop the cabinets all the way to the ceiling. I know some would, but I have 9' ceilings and to do so would have looked funny and made the cabinets completely unusable.

One thing I really love are the stainless and glass vent hoods. I really dislike the big hulking, over the range microwaves. The truth is, I don't have the real estate for a counter model, so for now I will stick with the big hulking over the range microwave! Poo.

I removed the doors on two of the cabinets and painted the interiors. After looking at them for a few weeks, I decided I did not like that open look even with all the "pretties," so I ordered new maple doors, stained them and added reeded glass inserts...like my laundry room door! (LOVE!)

I get the "openness" without the cabinets looking "unfinished." There is a chance I may eventually do this with the doors on both sides of the refrigerator!

I did add some under counter lighting above the pasta shelf and the "baking" shelf.

I wired into the existing under counter lighting and ran the wires between the cabinets and across the top of the cabinet above the refrigerator that was covered by a shelf. Now all the under counter lighting can be turned on with a flip of the switch that was added when we did the original lighting!

I added glass jars here and there to hold tea, baking stuff, beans, and pasta. I love the Anchor Hocking Heritage jars for flour and white sugar but they don't have sealed lids which is necessary for brown sugar. (That was one great thing about reworking and organizing my pantry...I was able to designate one cabinet and shelf area specifically for baking stuff.)

I found sealed jars similar to the Anchor Hocking Heritage jars, as well as jars tall enough for spaghetti and linguini at TJ Maxx! I ended up with a variety of jar styles I picked up at TJ Maxx, flea markets and Oneida online.... and I like the different looks!

While I think the matchy-matchy boxes and storage bins are super cute in pantries, I prefer to actually SEE what I have...so I organized my pantry and cabinets so that like items are together and I am able to see what I have and what I need at a glance!

The upper shelves were a great addition...mostly so I can now openly display my cookbooks and a tiny bit of my china (I have 6 sets!) and also a few little decorative do-dads.

The old coffee grinder is one I have had in my booth for MONTHS...probably because it is missing a piece of the top...but it looks pretty neat on the shelf with the big gold B I picked up at the flea market, a fall berry wreath (I also have a boxwood, but the berry wreath is a new fall find this year) and an old chopping board I turned into a little "chalkboard."

This shelf had to be removable for one special reason! "Lord ?" He is stored away in the attic for the time being, but he has to have a special place when I decorate for Christmas and he would be too large for the space if the shelf could not be removed. So I painted the shelf bracing the same color as the wall and the shelf can easily be removed when it is time to display him!

As you can see, my kitchen is pretty "traditional." With furniture, I tend to lean more towards the clean lines of "modern/mid century" now but as with everything in my house, my kitchen is more of a mix of traditional, modern, and "farm house." Eclectic, to say the least. That seems to be the "style" I am most comfortable with...not too much of any one style, but a broad mix of everything!

A toss of this, a pinch of that, a smidge of whatever strikes my fancy!

One of the great things about being "eclectic" in your decorating style is you can pick up anything without worrying about whether it fits in with the "style" of the room. Whether it is modern, traditional, transitional or farm house...if I like it, I can usually make it work!

The biggest improvement for me is the addition of the open shelves and my ability to reorganize a few spaces to make the over-all kitchen a tad more functional and organized.

And that my friends should be the PRIMARY goal for any "makeover." Because let's be honest...if the piece or space isn't functional and organized, all the pretty it the world isn't going to cut it!

First and foremost, make your space or piece functional and organized. THEN make it pretty!

BTW, as much as I debated painting the fireplace wall when I remodeled my den I am SO glad I didn't...it is perfect for the holiday seasons...fall AND Christmas.... and I can't imagine it any other color!

Friday we head out for our annual train/zipline/fishing/Aspens adventure! I am soooo ready. Matt will be here holding down the fort and when I get home, fall will be in full swing...regardless of the temperatures!

Info

3 Comments

Fun and quirky pumpkins and fall in the Ozarks!

The high Saturday was in the low 70s!!! Fall is in the air! But as always, the "early fall" was fleeting and this week we are back in the 80s. Cruuuuud!

I want desperately to break out all the fall decor but I will wait! I usually decorate right before we head out to Colorado...after a trip to the mountains and a week in the glorious Aspens, it will officially be fall in my mind...regardless of the temperatures!

I have been tweeking a few things in preparation for fall decorating. I picked up a few boxes of holiday knick-knacks at an auction a few weeks ago and found four really cute ceramic pumpkins and two wooden pumpkins.

As much as I love the fall colors, I decided I have WAAAAY too much orangey stuff so I decided to get a little creative with these.

Metallic gold? Hum...interesting.

Maybe white pumpkins?

Candy corn pumpkins? Kinda like these little jars I made a few years ago...super simple and a quick, quirky update to otherwise boring pumpkins!

Dunno...I have a few hundred pumpkins stored in the attic so I will see how these mesh when I finally drag it all down and start setting it up! The great thing about hitting the clearance sales after the season (besides the great savings) is all the wonderful surprises I find the next year!

A few years ago I shared a tutorial for making fall floral urns! Now is the time to get busy and make a few of these! This is the perfect way to use old pumpkins and garland you have grown tired of and no longer want to decorate with!

For me, decorating for fall is a two day process....seriously, I have THAT much! Insane!

Fall in the Arkansas Ozarks can be amazing! One of the greatest traditions in our area is the Fall Craft Fairs, anchored by the War Eagle Mill Craft fair! This year the fair will be October 15-18.

My advise for attending this event....go early to avoid traffic...wear comfortable walking shoes...come hungry (OMGosh the food is amazing!)...and make sure you clean out your trunk!

Not sure if you can even book a hotel in this area at this late date, but even if you hve to stay 1-2 hours away, it would be worth it.

War Eagle is not the only craft fair in the area...Northwest Arkansas will be covered with craft venues and the local papers will print maps of all the places where you can literally get lost ALL day just browsing and buying and filling your head with all kinds of inspiration for the holidays and home decorating.

Since I DIY almost everything, I rarely come home with a lot of "stuff" but I do come home with a head full of inspiration!

If you don't have anything planned for that week and want to take a little road trip with your girlfriends or family, I can promise you will have an amazing time! And maybe the trees will cooperate and you can see the glory of fall in the Ozarks!

Info

Comment

A marvelous mid century lamp!

Week three of waiting on the trim for the kitchen. Now I think I may just wait until I get the new doors with glass inserts installed before I do a full reveal...at the rate I am going with the trim, the doors will be here about the same time! Curses...

SOOOOO, in the meantime, I want to share a darling little lamp I picked up at an auction for next to nothing. I probably would have paid a little more for it since I knew the minute I saw it, I wanted it.

Why you ask? Let's be honest, it wasn't much to behold in it's "before" state. But what 50-60 year old piece ever really is! That is the great thing about learning to DIY anything...you can always take a $1 find and give it a good little makeover.

What drew me to this piece originally was the style. TOTALLY different than anything I had ever seen and definitely leaning towards the "mid century" style. My true love. I tried to find one similar...I Googled "mid century wood brass lamp"...."walnut brass lamp"..."atomic lamp." I found a few "similar" but nothing close enough to consider a hit.

Less the dreaded "oops," this little lamp didn't take a lot of work. I stripped the wood with the 1/2 acetone-1/2 lacquer thinner...that took all of about 5 minutes! I taped off the wood, cord and the sockets, gave the old copper base, finial and sockets a coat of metal primer, light sanding with steel wool, tack cloth, and a couple of coats of gold metallic spray paint! (The "oops" was my impatience which resulted in the need to completely strip the base and reprime and paint the entire thing!)

Did you know you can easily paint brass...yep...just prime it with metal primer and then paint it any color you want. Have an old brass lamp your mom gave you or you picked up at the thrift store. PAINT IT!!!!

I am slowly coming to terms with gold metallic accents and honestly, I'm kind of digging it! I even painted some ceramic pumpkins with gold metallic for my fall decor!

After the paint dried I applied a couple of coats of tung oil finish to the wood. New lamp shade from Hobby Lobby (40% off...yeah!!!!) and it is ready for another lifetime of use!!!

What is that blue "dish" you asked? I found it in one of the cabinets when I was purging my kitchen...a true gem! (My son would have been 12 when he made this!)

As I mentioned here, I think it is important to decorate with things you love and with things your children have created!

Fortunately, the wiring and sockets were in great shape, but seriously no biggy if an old lamp needs a little rewiring. Here I created a new light fixture out of industrial-type fans, but the general steps for rewiring a lamp would pretty much be the same!

If you are tired of your old boring lamp, paddle fan, or light fixture, check out these posts for just about any lighting project. Fairly simple projects that help you update ANY fixture or "lighten" a room without breaking the bank...because let's be honest...brand new lamps, light fixtures and paddle fans can be expensive.

Installing a new light fixture

New outdoor lighting

Painting designs on light or lamp shades

Painting light fixtures and paddle fans

Adding under counter lighting to the kitchen

Painting a brass lamp

Rewiring a fan or appliance

There are so many ways to change and update lighting! And super simple! Give it a shot...again, what's the worst that can happen. You still hate it and you still won't get more than a couple of bucks at a garage sale for it!

Also...a quick reminder! I have mentioned before that if you aren't sure what to do with something, take it down to "base neutral." In my case I have a garage full of projects I haven't decided what to do with yet. But I know one thing for certain...it all has to be repaired, primed and sanded. So yesterday, that is exactly what I did with a wood stool, 2 chests, 1 dresser, a ratan shelf, a few frame shelves and a set of ratan chairs. THIS is "base nuetral".....

Now that it is all prepped and ready for a new look, I am ready whenever the "creative bug" hits!!! If a piece of furniture has got a bad case of the "uglies" and you just don't know what to do with it, just remove the hardware, prime it, sand it, and eventually inspiration will come!

Info

2 Comments

Antique mahogany dresser makeover....

AGAIN, no kitchen reveal. I know...disappointing! But I am still waiting on the trim I ordered to finish out the little details and when I get that done, I will share. Course now I mulling over the idea of putting in glass doors...maybe a little more paint...maybe a little more lighting. See, it never ends!

So while I impatiently wait I am going to share a pathetic little dresser that came to me by way of my neighbor. It had a few more repairs than he was willing to tackle...for me, no biggy!

Chipped drawer fronts, damaged veneer top, and a pretty sketch wiring job on the back legs that was evidently keeping the entire thing from exploding...because when I removed it, the cabinet pretty much fell apart!

The veneer really wasn't in that bad of shape when I got it. Naturally, I forgot to take a picture BEFORE I started ripping into it!

Like many old pieces, it had a beautiful mahogany veneer on the top, but time had taken it's toll on this one and the veneer had lifted and chipped. Course the edges came right off with little effort...it was the rest of it that took a lot of work!

On these older pieces, the beautiful veneer is usually laid over a pretty decent piece of wood. Like this oak library table my daughter and I refinished, removing the veneer just entails a good steam iron, a scraper and a lot of elbow grease! Always be VERY careful when removing old veneer...scrape WITH the grain and make sure you don't gouge the substructure. And if you are using an iron for a heat source, make sure you put an old rag between the iron and the veneer!

When you remove the veneer, you are going to reveal all the "warts." While the wood is solid and often beautiful, it will probably have a prominent grain and a few knots here and there...embrace it! If you ask me, that is what makes wood beautiful...it's "character."

The back of the cabinet required glue and clamps. Again, ALWAYS make sure your pieces are properly repaired before you start "refinishing." Or honestly, you are wasting your time! In this case, I didn't have much choice since it really did fall apart when I removed the wire that was "clamping" the back two legs together, which was basically holding the entire back in place.

The next chore was repairing the two damaged drawers. Not only was the mahogany veneer chipped and missing, but the "substructure" it was adhered to was missing.

This may seem like a daunting task, and is probably what frightened my neighbor the most, but it is just a little "puzzle." Just recreate a new base by glueing a scrap piece in place and then use wood filler to "sculpt" a new corner...lots of patience and some careful sanding! This may take 2-3 shots to get it right, but it is doable! Since I planned on painting the drawer fronts, it worked perfectly!

After all the repairs were completed and the veneer top was completely removed, I chalk painted and distressed the cabinet and the drawers and applied a walnut stain to the top. I sealed the top with three coats of tung oil finish and the chalk paint with a few coats of spray on poly!

The inside of the top drawers were a bit worn and stained so I gave them a little KTSP treatment with a bright teal!

New porcelain knobs...and OH MY! Beautiful again!

Don't turn your noise up at old, damaged pieces. This piece had three strikes against it, but it was hardly down and out. Yes, it took a little work, but in the end it was well worth the time and effort!

This piece would be perfect for one of those precious French graphics from "The Graphics Fairy," but I think I will let the new owner add their own creative touches!

Another piece ready for another lifetime of use!

Info

5 Comments