Master bathroom reveal....

Like so much in my home, my master bathroom has certainly “evolved” over time.

Before the first “makeover.” Booooo…..

This is after the first little makeover. I removed the hideous gold shower enclosure…new cabinets and lighting…a new tile backsplash…new paint…new vanity top and sink…new mirror…new operable window (my absolute favorite change!)…nothing earth shattering but enough to give it a little update and make it more functional.

While the few changes I made on this go round SEEMED relatively straight forward, the process was messy, back breaking, expensive and worth every bit of it!

Demo and new plumbing done!

Durrock and shower pan done…

I LOVE the curbless showers…and I really thought about biting the bullet and putting one in…but that would have required busting out the slab under the shower and pouring another below the finish level of the rest of the bathroom or building up the entire bathroom floor, which would have required removing the counter tops and cabinets. That wasn’t happening…so curb it is.

Waterproofing done and tile going up! (yes, I hired the tile install…worth every penny!)

(Notice the fan hanging in the window…it is facing out. That helped pull a lot of the dust outside…not all but A LOT)

As I mentioned when I posted the first makeover, I didn’t have (nor do I really want) a big sprawling space to work with…it is a relatively tiny bathroom….and I am okay with that. I would rather have the square footage in other areas of the house. That didn’t mean I couldn’t create a space that not only suited our needs but was pretty.

I loved “the first makeover” for many years!

The time will soon come when stepping into a whirlpool tub we never use will be an issue so it was time to make some major changes…while we can still climb the stairs to the spare bathroom! I joked with Brian for years that we needed to do this before we broke a hip and couldn’t use the tub or walk upstairs…joke, right? Then our friend, BR, broke his hip and had to have a partial hip replacement…HE’S OUR AGE!!! Suddenly it wasn’t so funny and it really is a “need” vs a “want.”

First, I had to again find my inspiration…that was a tough one! I loved the tile surround and floor tile I installed 19 years ago.

Since it is a small bathroom I knew I wanted to keep it light and bright!

I brought home and ordered many tile samples and searched the internet for inspiration….

I knew the look I was going for. Light and bright and something that would carry me through another 20 years…..I didn’t want to do anything too trendy.

I love the sliced pebble tile and after using it on the tile back splash I knew I had a winner for the shower floor and niche!

I like the look of subway tile but I didn’t want the “busyness” of a small tile on the shower walls…fortunately Dal Tile makes a large 6x18 subway tile. One of the things I hated though was the small bullnose trim…usually 2x6. Fortunately the tile I choose had a large 4x12 bullnose trim…PERFECT!

The flooring…that was a real booger! Truth be told, I loved the floor tile I had…it was light and bright and had awesome “texture.” Unfortunately it was 12x12 tile with 1/4” grout lines…very 1999! I knew I wanted a 12x24 with small grout lines.

I finally settled on kind of a “greyish” porcelain tile I found at Lowe’s. But in my heart I knew I didn’t want to go with grey…just too “trendy.” While I was at the tile shop ordering the wall tile I stumbled upon a special order tile I thought I might really like. All they had was the sample board so I brought it home, looked at it for all of 5 minutes and went back and ordered it. Eck!!!!

But you know what…I LOVE IT!!!!

Originally I planned to use the bullnose trim around the window and niche. But then my “blog friend,” Cristina, shared her bathroom makeover and I absolutely fell in love with the pencil trim pieces she used! (Her bathroom is absolutely stunning and beautifully staged! Check it out!)

I immediately ran to our Home Depot only to discover THEY DID NOT CARRY IT IN STOCK! I found it online and ordered it. It arrived two days later as promised.

Broken! Eleven out of 26 of the fragile trim pieces were broken. And while I am smart enough to always order more than I think I will need, I certainly didn’t order THAT much extra.

I promptly reordered more trim. Fortunately the delay didn’t hang up my tile guys…too much! I ordered 20 more knowing I only needed 11…good thing I did because the second order had 7 broken tiles! (They really should reconsider their packaging!)

I absolutely love this trim around the window and niche!

Speaking of window…I know the glass block probably screams 1999 as well. My original plan was to change it out. Now that the tile is done, I don’t find it as offensive. It may not be the “hip” thing to have right at the moment, but I can live with it!

I decided to reuse the existing base trim. I carefully removed it during demo, pulled all the nails and sanded it. I painted it with my “go-to” trim color, BM Swiss Coffee. Then I reinstalled it, puttied the holes, caulked and gave it another coat of paint!

I debated on a glass shower enclosure but honestly, I don’t like them. Just too high maintenance…no matter what you do, there will always be water spots. I found a longer curtain online so I ordered it…nice thing about curtains, you can always take them down and wash them.

The teak bench. I didn’t add a built in bench because the only place to put one was in the back of the shower…the side wall and the back wall are on the exterior of the house so expanding “out” wasn’t an option. A bench in the back of the shower kind of defeats the purpose if you want to sit in the shower. Seriously, who does that? Brian…when he is sick he likes to sit in the shower. And I need something to prop my legs on when I shave them. So I bought a little teak bench. It looked kind of dinky sitting in the back of the shower and Mr. Jinx needs a place to sit while we shower (he use to sit on the edge of the tub…weird cat!) So for now it will sit outside the shower unless we need it (lets be honest, who really shaves their legs EVERY day?)

My super awesome son-in-law installed new lighting during the first makeover…I still love it! For now I will keep the lighting and the cabinets, vanity top and sink. All were good! (I did repaint the ceiling since I had to do a little sheetrock repair)

As you can see from these pictures I don’t do a lot of froo-froo! I’ve worked hard to create space for everything behind closed doors. Fortunately I have a large pantry space in my master closet where I store “extras.” No need for lots of extra storage cubbies and because the vanity top is relatively small, I don’t like to clutter it with stuff. I love the beautifully staged “spa retreat” mega bathrooms, but I don’t have the space or the desire…I want clean, bright and clutter free…very “utilitaryish.”

I do have bath rugs but they are plain ole’ white spa rugs so I took them up to show off the floors!

We don’t reuse towels so no need for cute hooks. We take our dirty clothes to the laundry room so no need for hampers. Everything is stored in drawers and cabinets so no need for pretty jars and baskets. And since I like to bleach all my towels and rugs I only use white rugs, towels, and wash cloths.

All in all, I’m pretty darn happy with these changes. Eventually I may change out the vanity doors and paint…I may paint the walls a different color…I may change out the block window…I may add a few more decorative elements…I may add some trim detail…I may change out the shower head to something more like a “shower” and less like “rain”…I may…I may not.

There will always be little “snafus” when remodeling…in my case there was the broken tiles and the difficulty of demo and the discovery that my “niche plan” wasn’t going to work. But in the end, it all worked out and I have a beautiful bathroom I HOPE will carry me through another 20 years!

Hopefully…maybe. Who knows! Check back with me in 20 years…lol!

Info

4 Comments

A mid century chest of drawers makeover...the reveal!

When last we spoke, I shared a little “step by step” tutorial for repairing and prepping this “less-than-desirable” chest….

I can not stress enough the importance of “prep work” on any project. Again, if you don’t take the time to make repairs and properly prep (regardless of whether it is a dresser or a wall or a floor) all the “pretty” is going to be wasted.

(BTW, while cruising Pinterest I found this super awesome tutorial for repairing chipped corners with wood filler! Great suggestions!)

Make proper repairs, sand patches smooth, use the right tools and materials! Do the repairs and prep or you are wasting your time and resources making it pretty.

After all the patching and repairs, the next step is properly priming! (I had already stripped and oiled the drawers and set them aside!)

I primed the cabinet of the chest with Kilz. That is usually my go-to primer since it sands smooth and holds up well. Primer is a SUPER important step on most paint projects…unless you are chalk painting! Since this was a relatively small project I used the spray Kilz…one can.

TIP: I know a lot of paints SAY they are a “paint and primer” in one…I may eventually change my tune but I don’t believe them. I ALWAYS use a primer…always!

After the Kilz had dried well (usually overnight but several days is best), I sanded it smooth with 220 grit paper.

After sanding I checked all the areas I had repaired…there were a few little spots that needed additional putty and one I missed on the first go round…

…no biggy….I just filled them again, let it dry, sanded smooth, spritzed on a little more primer and then sanded it again after that had dried.

Tack cloth…it is an absolute necessity on any paint job. I see tutorials all the time that recommend wiping the piece with a damp cloth or even mineral spirits. Forget about it! USE TACK CLOTH! It will pick up the finest grains of whatever and will make a huge difference in the final look and feel of your paint job!

I’m kind of obsessed with white lacquer these days. i just love the high gloss finish. Spray paint is always a great option for smaller projects and you can find a multitude of colors and sheens! Just make sure you use a quality brand! You can also brush and/or roll alkyd (oil based) or latex (water based) paint. ALWAYS use an additive and use a high quality brush and 4” foam roller to apply the paint. Pay attention to the manufactures recommendation for temperature and application…it matters!

Regardless of whether you use a spray paint or lacquer, latex or oil, always apply 2-3 THIN coats, allowing dry time as recommended. Thinner is better. If you try to get a one coat finish, you will likely be disappointed and make a HUGE mess!

Spray, roll, and/or brush on the paint…a thin coat…let it properly dry, lightly sand the boogers AFTER it has properly dried with a fine grit paper (IF needed), tack and recoat. Regardless of whether you need to sand between coats, always use tack cloth before applying additional coats. I usually apply at least two coats and sometimes three.

Most paints do not need a top coat but if your piece will be getting a lot of use, I recommend a light coat of polycrylic. Polyurethane is some good stuff but it tends to “yellow” so polycrylic works great.

So…before….

…and the oh-so-better after….

You may have noticed one little missing element. The hardware! Why? Well because I didn’t pay attention when I ordered new brass cone knobs and they are coming from CHINA!!! So I should have them someday…maybe…who knows! The hard work is done…knobs are no biggy!

One of the patched areas after paint…

Dry time…IT MATTERS. I cringe when I watch DIY shows and they immediately stage all the pretty pieces they just painted. There is a huge difference between “dry to touch” and “dry to USE.” Truth is, paint and finishes need time to cure before you put all your pretties on it. You can move it in place, but give latex paint AT LEAST a week or two to cure and oil based paints a good 3-4 weeks. Otherwise you may find that your heavy lamp or knick-knacks will stick to the finish or leave a mark!

This is another dresser I finished up a few weeks ago. It didn’t have near the issues the first had, but the refinish process was the same…KSTP the cabinet and refinish the drawer fronts…presto-bingo…

Again, I know this sounds like a daunting and time consuming task…but if you take the time to do it right, you will have a piece that will last another lifetime and one you will be proud to use in your home!

Next week I hope to share my bathroom remodel. In the meantime, you can check out Cristina’s master bath…it will knock your socks off!

Until then….

Info

1 Comment

A mid century chest of drawers makeover...Part one!

While my master bathroom remodel is still progressing (yea!) I finally found time to tackle an amazing mid century dresser I found!

This chest of drawers was pretty shady. Nasty finish, chipped veneers, busted veneers, mismatched hardware…just not something you really want in your home!

It had many of the problems you may encounter with old pieces so it is the perfect project to share a little “step-by-step” tutorial on turning a trashed dresser into something you will want front and center in your home!

First, there was a busted drawer! (Which reminds me, ALWAYS number your drawers on the underside as you take them out!)

This is NOT a huge issue.

I can not stress enough the importance of making proper repairs to any piece before you start making it pretty. Glue and clamps people…NOT silicone, not screws, not nails…just plain ole’ wood clue and clamps.

This one really wasn’t too bad…there have been some I had to completely tear apart and rebuild!

One drawer was missing the wood slide like this one…

Kinda necessary if you want your drawer to not be all whomper jomped. Again, no biggy. You can buy slides online but I used some scrap 1/4” plywood and scrap trim to make one. Again, glue and clamps and good as new!

TIP: If you have a drawer with wood slides that seems to be difficult to pull out, try rubbing a wax candle on the wood slide. If you have a metal slide, make sure it isn’t bent…if it is, just take a pair of pliers and manipulate the metal.

Also, if you find the drawers to be a tad smelly, first wipe them down with ammonia and water, then spritz them with vinegar water and let them sit. Truthfully, I have found a few that smelled no matter how well I cleaned them….in that case I taped off the fronts and painted the interior and exterior of the drawer with Kilz and latex paint (here is an example!)…sometimes you have no choice!

Next up chipped and scratched veneer.

A lot of the older furniture is veneered. If it is chipped or scratched, take the time to remove any loose veneer and repair it with a little wood filler.

The first few coats don’t have to be pretty…you just want to make sure you fill all the boo-boos well. Don’t rush this process…it may take two or even three coats to get a smooth repair!

In this case it took two coats (sand between each coat) and a lot of sanding with a fine grit paper (220) to get a smooth repair, but in the end it will be worth all the effort!

I have found that after I prime and sand, I can often see how well the “patch” will look and can add more filler and do more sanding if needed. If it looks and feels rough after priming, it’s going to look bad with paint…so do a little more work on it after the primer if needed!

My plan originally was to strip and oil the top since it is a walnut veneer, but I did a number on it dragging it out of my truck…so repair and paint it is.

I would like to stress (again!) the importance of sanding and FEELING! You want it smooth to the touch. If you can feel it, you will see it when you paint it! So sand it smooth.

The veneer on the drawer fronts were in mint condition…the finish just looked old and “muddy.” I removed the mis-matched hardware and then stripped the old finish (using this process). It took me less than 30 minutes to strip all four drawers.

The two on the right have been stripped…the two on the left have not…as you can see, they weren’t THAT bad, but this quick step brightens the color and really allows the grain to shine.

On veneers it is important to use chemical stripping as opposed to sanding. Veneers can be very thin and if you sand through the veneer there is no salvaging it…you will have to putty and paint!

After stripping them I applied three coats of Formby’s tung oil finish. I love this stuff and it is my “go-to.” No stain, just a clear finish!

(It was pointed out to me by a kind reader that the original Lane Acclaim tables came with a “toned lacquer” finish….true of many mid century pieces. That may be the case but again, this is the process that works for me and the one I prefer…do your research and do what works for YOU! I prefer the “easy to wipe on and freshen in the future” tung oil finish over lacquer)

I also stripped and oiled the legs since they were in pretty good condition. Same process, same finish.

If your drawer fronts have MINOR chipping like this one did, I would suggest carefully removing or glueing any “loose” veneer (I use a toothpick to slide a bit of glue under any loose veneer and wipe the glue residue with mineral spirits) and then apply the finish. As my daddy use to say, you will never notice it on a passing train! Any time I can salvage and feature a beautiful walnut veneer, I do!

Again, my apologies…this will have to be one of those “to be continued” posts. We had rain and a cold front roll in (yea! it really is fall now!) and since I don’t have a nice cozy shop I am at the mercy of the elements.

Priming, paint and reveal will have to wait until next week!

This process may SEEM daunting and time consuming but in the end it is all worth the time and effort to bring these sturdy old pieces back to life!

Take your time and do it right and you will have a piece fit for another lifetime of use! Hopefully next week you will get to see the results of all this prep work!

Info

Comment

Vacation and the bathroom renovation!

We returned from our vacation last week….AMAZING! One day of floating and fishing the Gunnison Gorge, one day of fishing the Colorado River and five days of beautiful Aspens in all their glory! Sadly, Brian nor I took our phones into the Gorge or I would have some breath taking pictures of some of the most beautiful landscapes this country has to offer. All I can tell you is to go see it yourself! It will not disappoint!

I knew I would have to hit the ground running when we came home. I have an apartment that needs tile repair, a cabinet rebuild and paint. And I found an amazing mid century dresser that has all the problems one might encounter with a dresser and I was excited to do a step-by-step tutorial on properly repairing busted drawers, fixing chipped veneers, stripping and painting.

But Monday the tile guys called and they are ready to start on my bathroom. Since I am too cheap to pay someone THOUSANDS to demo the old tile, I decided to tackle that chore myself with the help of my son, Matt.

And chore it was!!!! My plans to take out the wall tile in sections only worked about half the time…the other half we were beating out little chunks of tile and durrock. My plans to “pop up” the floor tiles went by the wayside when we discovered it came up in small slivers with a mere chisel and hammer.

One of the things I learned from my dad…build it to last a lifetime…and since I installed the tile 19 years ago, it was more than a booger to get up!

Thank goodness for tool rentals. This little “tile-buster-upper” thingy saved us about 2 days of work! Seriously, it was the best $60 I ever spend.

I still had to replace some insulation, add a few studs, do some floor scrapping by hand and I had to hire plumbers to move the drain and rebuild the shower valves. But all in all it is coming along nicely and HOPEFULLY it is ready for the tile guys.

As with all “best laid plans” there is one small snaffu in my plan. I had intended to do a shower niche on each side of the shower head…two shelves in each…like the one in my “inspiration picture.” Unfortunately the layout of the studs and plumbing messed up that whole plan….

…so now I can only put one on the right…que sera! Sometimes you just have to drop back and punt!

I can tile. Not a problem. Here I showed you the new backsplash I installed on the vanity! But I am glad I decided to pay someone else to tackle the bulk of this project. After two days of demo, I’m not sure I could lift a box of tile if I had to!

This is where I want to reiterate the importance of doing what YOU love! Not what is “in”, not what Pinterest says is all the rage, not even what your friends and family think you should do! I am all for “finding inspiration” for home decor and improvement projects, because let’s be honest, sometimes we just can’t find a vision for the changes we want to make. But doing what YOU love is important because otherwise you may find yourself hating an expensive change in the not so distant future!

I still love the wall tile and floor tile I picked out 19 years ago…but I know the day will come when stepping into a big ole’ whirlpool tub we NEVER use may be a major feat…a walk in shower will be, some day, a necessity!

So find your inspiration but do what you truly LOVE!

MAYBE next week I will have time to get started on that amazing dresser and I can share how easy it is to turn a trashed piece of furniture into something you will be thrilled to use in your own home!