Christmas pillows....

One of the great things about the "blogoshere" is all the great inspiration AND motivation!

This past week I was reading one of my favorite blogs, "The Interior Frugalista", and Marie was sharing her snowflake decorative pillows...only she calls them "toss cushions." Gotta love those Canadians...lol!

Anywho, it not only inspired me, it motivated me to do something I seriously dislike doing...sew!

I have been scavenging down pillow forms. I wanted down forms for the decorative pillows that have poly-fill and a few extras for some holiday pillows!

As I mentioned before I like down forms because they are more comfortable and have a "designer" look! To me they just look "rich" but their price tag can reflect that and it is difficult for me to fork over twenty bucks for something I am going to have to make a cover for and something that is nothing more than a "doo-dad."

This past week I found 6 awesome down pillow forms, in varying sizes, ALL for under $7...a few for as cheap as $5. Thrift stores and flea markets. Yep...I am buying ugly old designer pillows, removing the cover and sanitizing the forms for reuse! (just toss them in a hot dryer with a dryer sheet!)

Since I had all these forms piled up, I knew it was time to drag out the old sewing cart and get busy!

TIP: If you have a 18 x 18 pillow form, you may be tempted to cut your cover fabric 19 x 19 to allow for the seams. DON'T. Cut the fabric 18 x 18...your cover will be about 1" smaller than the actual pillow form, but that is what will make them look super "puffy" and "full." I read that once on a designer website (no source, just info stored in the back of my brain!) and I tried it...makes a huge difference!

I have shared "pillow tutorials" on several posts in the past (you will note I advocated cutting your cover fabric larger back then...again, don't)...you can check them out here, here, here, and here.

There is no sense in rehashing the "how to." I've provided a tutorial and there are "how to" tutorials all over the internet. Marie does a great job of "tutorialing." (As I have said before, if you can sew a straight stitch, you can sew a decorative pillow...if you can't, now is the time to learn.)

So I am going to share just to provide inspiration AND motivation and give you a few little tips on where you can find material to make inexpensive holiday covers.

My first "inspiration" came from a Pottery Barn knock-off I found on Pinterest....

This little pillow was super simple to make. I used two pillow shams that came with a white bedspread I ordered to put over my down comforter for the winter. I was never going to use them on the bed, so I decided to use the fabric for my decorative pillows. I didn't have enough for the back, so I used the leftover fabric from the tea towel pillows I will share in a bit....

As you can see, I changed things up from the "inspiration" pillow. I used green sparkly felt and rhinestones...both of which you can buy at your local craft store. I cut a bunch of "leaves" from the green felt, and used a bowl to guestimate a circle...

Then it was just a matter of filling in the "wreath" and placing a few rhinestones here and there...basically, I eyeballed it! I used fabric glue on the green leaves and "Jewel It" glue on the rhinestones and let it sit overnight before I constructed the pillow. I used a "premade" silver bias tape for the piping!

I made this pillow out of tea towels I picked up at Hobby Lobby...

....they were around $4.50 (50% off!) for two!

One set of towels made TWO pillow covers and I used the leftover fabric for the backs of the wreath pillow! I spruced it up a bit by placing a rhinestone in the middle of each of the snowflakes and added a little piping around the edge. The piping is made out of bias tape and you can find a tutorial here on how to make inexpensive decorative piping from bias tape!

I made two pillows with this snowflake cutout table runner and a white table cloth I bought at TJ Maxx. (I would not suggest using inexpensive tablecloths for pillow projects...just seems too "thin" and tends to ravel quite a bit. Lesson learned.)

I centered the runner on the piece of fabric I cut out for the front of the pillow and basted the top and bottom to it with my machine to keep it in place. After I basted it, I used the fabric glue around the edges of the cutout to keep it "flat."

Again, I glued a rhinestone in the middle of each snowflake. I just love "sparkle!"

After making two white snowflake pillows, I had enough of the snowflake cutout to make one more pillow. I picked up a "burnt red" pillow and I kind of liked the color so I deconstructed it, made it a tad smaller so the pillow would be fuller and added the white snowflake cutout material.

I only have one, but I think it will look great in the den where I have more "fall" colors year round!

I also put zippers on all these pillow covers so I can easily remove them and reuse the forms!

I tend to be an "OCD/symmetry" kinda person so I made two of each of the decorative pillows so I will have one for each end of the couch when it is time to decorate for Christmas.

All these pillows are 18 x 18 and honestly, I don't like the three lined up together. I found two smaller pillow forms and plan on making Christmas covers for them and using one with two of the 18" pillows on each end of the sofa...maybe...someday...IF I get a little more motivation in the future!

While I was making a mess, I decided to make another "floor pillow" for the den. I had two large poly-fill forms (actually they were Euro-pillows with ugly covers!) I bought at an estate sale and I thought they would be perfect to toss around on the den floor for tv watching! I had already made one large toss pillow and two smaller decorative pillows out of some leftover fabric from my dining chair project.

I used the drop cloth material leftover from this chair project and an iron on graphic from The Graphic Fairy. Since the pillow was fairly large, I decided I wanted the graphic to be bigger so I pulled it up in Adobe Photoshop, enlarged it and then printed it out on four sheets of iron-on transfer paper. Then it was just a matter of piecing the graphic together and ironing it on the fabric. There was a little "line" where two of the pages didn't quite fit together perfectly...I used a Sharpie to fill it in a tad.

I removed the "Grain" wording on banner in Photoshop and had intended to replace it with "Love Life." But I had a few issues with my printer so I ran out of transfer paper. Since I put zippers on all my pillow covers, I will just remove the cover and iron on the new words when my order of paper comes in.

I still haven't shared my fall decor. Truthfully, it hasn't changed a whole lot from last year. But I have a few little additions and I thought it would be fun to do an entire post about the fall decor and update my Holiday Decor pictures. After all, Thanksgiving is less than three weeks away and the day after Thanksgiving, it all goes back in the attic! If you see anything that "inspires" you, it will be the PERFECT time to snag fall decor for pennies on the dollar!!! You may have to wait til next year to use it, but it is always fun to find things you forgot you bought last year!

So this week...I promise!

Info

6 Comments

Finding inspiration for a ladder shelf!!! And my master bedroom update!

One of the awesome things about the "blogisphere" is all the great inspiration and instruction you can find for just about anything you want to do!

A few weeks ago, my inspiration came from Kristi at "Making it in the Mountains." She built a ladder shelf for her back deck and it is awesome!!!

Someday I plan on making one exactly like this! I bought a few ladder shelves at an auction recently and when I priced them to see how much I should sell them for they were going for around $150! Craziness! And they aren't even fit for outdoor use like Kristi's!

Anywho, MONTHS ago I ended up with a beat up old desk from an auction...the auctioneers know us now so when no one bid on the poor old thing, he pointed at me and asked if I would pay a dollar...whatever...I figured I could do something with it. Heck, the awesome hardware is worth a buck!

I originally planned on restoring it but truth be told, it was pretty rough and I have learned that "rehabbing" these old desks really isn't worth the time and effort for resell. The top was laminate and the drawers were veneered. The only good solid wood was the leg and it was hanging on by a few flimsy nails!

But the drawers were well constructed...and the veneer was easily "patched."

So I decided to use the drawers and make a "modified" version of the ladder shelf...a drawer shelf!

I think it could be used as a storage shelf in a bathroom or laundry room...maybe toy storage in a kid's room! It's pretty sturdy so it can hold a lot of "stuff."

I painted the drawers with the "frosted berry" paint I bought for my room. Not that I think it NEEDED to be that color, but I have the paint and I like it! Rather than use the awesome hardware (I am hoarding those for a special project) or fill in the holes, I used rope on the two bottom drawers and a plain white knob on the top! It doesn't NEED pulls, but I want it to look like what it is...drawers!

I cut the top drawer down....I contemplated cutting the middle drawer down as well...no reason why I didn't...I just didn't!

Thanks for the inspiration Kristi!!!

(BTW, it sold within hours of putting it in my booth! Wow!)

MASTER BEDROOM PROGRESS!

As I mentioned in this earlier post, I finally broke down and bought the laminate I want for my master bedroom! Lumber Liquidators had a deal I just could not pass up! Fortunately, it will take two weeks to get it.

"Back in the day" that would frustrate me. There was a time when I could pull the trim, remove the old flooring, lay the laminate, reinstall the trim and paint...all in ONE day...or at least a weekend. Now...not so much. I have been pulling carpet and glue-down hardwood for over a week! My back ache and sore legs make living in this disaster of destruction somewhat tolerable!

Please note that even when my room is in complete disarray, I still make my bed every day! I am thoroughly convinced that the first day I don't make my bed will be the day I die...it's a "thing" I have. (discussed in detail here)

I had to remove the base of the fireplace surround to remove the flooring. I stupidly laid the floor THEN built the fireplace surround...I know better than that. This is a prime example of WHY it is a problem to set cabinets and fireplace trim on top of flooring!!!! Chances are you will replace the flooring long before you replace cabinets or fireplace surrounds...and removing the old flooring will be very difficult if it is under the cabinets or surround!

I did find one neat thing...I guess when I built this room I painted "I "heart" you" on the floor. How sweet!

There is a downside to DIY projecting! The mess! But I have wanted new flooring for YEARS so it will be worth it!

I decided to reuse the existing trim and set it on top of the new flooring...so I have to pull all the trim, remove the nails and scrape off the old caulk.

I also decided to do the floors in the office...but right now I am only going to do the main bedroom and get it back in order before I tackle the office. The office is ALL glue-down hardwood and it will be a booger to get it all up! I played with gel staining the existing hardwood...and it would have worked had I stained it all at once rather than doing a big "test splotch." Unfortunately, you can see the "lap over" of the stain and it looks horrid. So it all comes up and new flooring goes down!

I am hiring my neighbor to remove all the old flooring in the office...it is a small room but after a week of working on the master bedroom and what I know will be a labor intensive 2-3 days of installing the new flooring, I am finally having to admit I am too fricking old to "do it all."

Curses.

Info

9 Comments

When the mouse is away...

This has been a week of MAJOR work so I will have lots of goodies to share. I had tons of projects piled up in my garage. I even skipped a potentially awesome auction this weekend because I knew I did not need to haul anything else home until I cleared out some projects. Even though I know I put a huge dent in it, there is still so much to do.

Saturday and Sunday I painted outside. Brian (affectionately, the mouse) went out of town Monday so I rolled out my handy-dandy "sewing cart" and went to work on a few sewing projects! Seriously, I LOVE this sewing cart!!!!

I know it looks fairly organized in the picture, but truth is I had stuff strung all over the dining and living rooms for three days...compressor, staple gun and staples, fabric, piping, pillow stuffing, etc. When I project, I go all out. That is one reason I waited until Brian was gone for a few days...because the house was a disaster (I NEED A SHOP!) and I stayed pretty focused.

Painting and reupholstering. For me, they are time consuming projects because I firmly believe in doing it right, even if I do plan to sell the piece! Whether I am keeping it or selling it, I treat it the same. Maybe that is why it is so hard for me to step out of my comfort zone and go bold on some upholstery projects.

When I rehabbed this side chair and rocking chair a few weeks ago, I picked a very nice and neutral pallet and meticulously painted and reupholstered them. Only to have the person who bought them ask how much I would charge to REupholster them...go figure!

Completed this week..six throw pillows, four upholstered chairs, three wood folding chairs, two antique oak school desks, one small table...if I had a partridge in a pear tree I would have painted and stuffed it!

The BIG chore is always the upholstered chairs. My first mental block is the fabric choice. I want something that will appeal to a lot of people, but is unique and interesting as well!

I dropped a little tease about this chair here!

Again, note the grass...dormant...that tells you how long this chair has been stuck in limbo!

When I pulled the back upholstery off this old chair, I found layers of old fabric...including a really cool piece of hand stitched quilt someone had used as padding at one point. I am always amazed at the history these old chairs reveal!

Several of you were fired up about the prospect of PURPLE! Truth is, I'm a tad too boring and conservative to actually paint the entire chair purple. I bought purple paint, but in the end, I just couldn't bring myself to do it.

But purple is the "color of the year" (or so the ads at Lowe's say!) so I wanted to use a bit on this chair!

I chalk painted and distressed the frame an "off-white" and then covered the back and seat (yes, I had to make a seat!) with this awesome fabric!

Since the fabric had purple in it, I went with purple trim! Aren't I just a wild and crazy gal!

So many other projects completed and I will share a few "before and afters" over the next few weeks. I made a large note and stuck it on the table to remind myself to take pictures before I hauled anything away!

Unfortunately, I don't have the space right now in my booths...so now the question becomes, WHAT DO I DO WITH ALL THESE STINKING CHAIRS!?

I guess I could throw a party...Lord knows there would be enough seating for everyone!!!

AWESOME RECIPE PERFECT FOR GARDEN VEGGIES!!!

I haven't shared a recipe in a while but I tried this totally awesome CRISP CUCUMBER SALSA and it is TOO. DIE. FOR! And it is low cal for those who care!

&nbs… — Photo and recipe curtesy of ***tasteofhome.com***

Usually I try a recipe verbatim and then mix it up a bit to my own tastes. This recipe has cumin and honestly, I'm not a fan...so I was certain I would change it after the initial try.

Nope. Not changing a thing (except I added a little more tomato.) It is wonderful and perfect for chips or on a salad.

Give it a try...this is a perfect time of the year for fresh cucumbers and tomatoes and there isn't a better way to prepare them! (Okay, sliced with salt is pretty awesome!)

Info

6 Comments

HAPPY BIRTHDAY KATIE!!!! Tales of a teenagers room...

First, I want to say happy birthday to my baby girl! Seventeen...wow! I can't believe you are 17!

In honor of her birthday, I am going to share her room. She is a teenager so it is rarely this organized and clean! But it is her creation and she loves her "stuff" and her space.

I featured the mural on Katie's wall here....and her "unstuffy" wing back chair here. Since we remodeled her room, she has added a lot of her own touches that make the space her own.

As with most teens, her room in a constant state of OH MY GOSH...CLEAN YOUR ROOM!!!! Dirty dishes, dirty clothes in the clean clothes basket (with the clean clothes still in it!), make-up and hair covering the floor and trim, dust bunnies EVERYWHERE! Just a mess.

She is a busy girl. She is an outstanding student (4.2 this last semester...she rocks), she works part-time and she was the lead in the spring musical. (Seriously, the girl has some crazy chops!)

So in spite of all my pleading, begging and bribing, her room stays in a constant state of "mess." Usually the result of just too much "stuff." So a few weeks ago, I decided to take action and tackle the mess.

Since it was in a half-way decent state, I decided it would be a good time to share pictures of ONE of the rooms upstairs!

I also came up with an idea that MIGHT give her incentive to get rid of "stuff." Keep in mind, kids lack the ability to organize and like most of us, they hang on to stuff that they really don't need or want any longer. It is important to "purge" on a regular basis!

I left this bag on her trunk. I told her I would pay her $20 for every large trash bag she fills with clothes, shoes, books....stuff! What many don't know is you can donate "stuff" to your local non-profit thrift store (Salvation Army, church organizations, etc) and get a receipt for a nice tax deduction. So $20 for a bag of things they no longer want or need benefits both you AND your teen...you get a nice little tax deduction and they get pocket change (or gas money!)

Younger kids can be enticed into "giving" their unwanted toys to kids who NEED them. Start them young!

I have learned that teenagers tend to be a bit more myopic and aren't as eager to clean out closets and drawers for the benefit of those in need...sad, but true! They want hard, cold cash!

So far I haven't seen the bag...we'll see. This is why I don't give parenting advise.

Info

Comment

Bedroom makeover...part 2? 3?

I don't know how many times I have griped about my master bedroom. So this past month I began chewing away at a few little things I dislike.

It is my favorite room in the house AND my least favorite. My favorite because it is an awesome room...big, bright, cozy. Least favorite because after 13 years, I STILL haven't decorated it the way I REALLY want it.

I blame it on the furniture.

Ornate, heavy, dark, veeeery traditional! I paid entirely too much for it, so I can't bring myself to get rid of it. One bad thing about furniture...no matter how much you paid for it, chances are you are only going to get pennies on the dollar.

There are a few pieces I would never get rid of...my dad's walnut chair and my grandparent's old trunk. The rest of it...honestly, if I had unlimited funds, it would all go.

But I don't...so it won't. The next best thing is to change it up a bit with a little bit of paint!

I featured the beside tables and the high boy here!

The next big project was the bed!

Honestly, this set would be perfect for a chalkpaint and distress treatment. I painted it with Kilz and sanded it and it was so cool looking. But alas, that is not my "thang" so I just went with my go-to Valspar Dune color.

I did finally paint the top of the Duncan Phyfe drum table...bye, bye beautiful mahogany!

I still need to do some kind of little vingette around this table...in time!

I'm not real thrilled with the bed. I had originally planned on painting all the raised part of the head board and just leaving the inset stained but Brian talked me into just painting the top scrolly part...which is really the part I disliked and it seems the paint just highlighted it. (See, I take his advise!) Oh well...it is different and that will do for now!

I also picked up this darling little antique fan at an auction. I'm not really into "froo-froo" stuff just sitting around and eventually it will probably go to one of my flea booths. But I like the color and retro style and it looks kinda cool on top of the highboy...for now! Until I have to dust it!

Now that all the furniture is painted, I REALLY want to install hand-scraped laminate flooring. And I really want to reupholstery the big chairs. Someday!

I found this AWESOME color chart on Pinterest....

I have some white and tan in the throw pillows and bedding but the majority of my white is a little more "off-white" and my walls are more of a "cream" than a tan. I can live without the grey...I like black better. But the blue is the color of my fireplace wall and I am itching to throw the cranberry color in there somewhere. Maybe in the upholstery on the chairs or a large rug on my new floors!

The paddle fans? Hum...might have to do a little a little paddle fan treatment!

So much I WANT to do.

That is one thing one has to understand about home decor. Unless you have A LOT of money and can afford to have a professional designer come in and do it top to bottom (my choice would be Candice Olson!) the best approach is a little bit at a time.

Don't be afraid to buy used and do a little work to make it your own. As much as I disliked this furniture when it was all stained and matchy-matchy, I'm kind of digging it now! Still want something different, but I like it a lot more now than I did two weeks ago! The floors will come in time and I know someday a piece of upholstery fabric for the chairs will "speak to me" ...someday.

I always tell my kids...it's a good thing we don't have a lot of money...think of all the great things we would never have learned to do had we had the money to pay someone else to do it!

Seriously how much personal satisfaction could one get from having a bazillion dollars and being able to design, built and decorate your "dream" house without concern for costs?

See what paint fumes do to you....

Info

15 Comments

Arch window covering and temporary window coverings!

It's that time of the year...time to put up the blinds and shades to keep out the blazing sun and cool down the house a bit!

This past week Brian and I put up the outside roll-down blinds that cover the west-facing windows in my den! I love all the natural light, but when the sun hits those windows around 4:00 on a hot summer day, oh my!

Hanging the blinds on the OUTSIDE makes a huge difference...and honestly it makes this room much more comfortable in the summer! (As you can see, I turn the couch around in the summer!)

The arch window in my living room is another story! I know....arch windows are soooo 90s. But that was when this house was built so that is what is there! It is a great place for fall and Christmas displays!

It would be very difficult to put a blind on the outside of the this window...so I had to settle with putting something on the inside.

This is how bright it is BEFORE I put up a blind....

And AFTER...

Seriously, no Photoshop and no camera tricks. Before and After...within a few minutes. That is how much difference there is and it makes a huge difference in the temperature of the living room!

Fortunately my living room is two stories, so it still FEELS bright and airy, I just don't have the blazing sun heating up the room!

I couldn't really afford a "custom" blind for this arch. When I was searching for a solution, I stumbled across a "temporary" pleaded blind...maybe $15.00. It is perfect! When I put my fall decor up in the fall I take it down, fold it up and store it away until late spring. It has a clear plastic "base" that sits in the middle of the window and you just drop one end of the pleated blind into the holder, "fan" it out and secure the outside ends. It came with a "peel and stick" adhesive on the base of both sides, but that was pretty much shot after the first year. So now I either tape it or tack it down. Even though it is just a cheap little thing, it has lasted a good 5-6 years! Worth the small investment!

So if you have a room that is uncomfortable because of the heat generated by the summer sun, think about using temporary window treatments! You just might find the room a little more enjoyable and you will help cut down your cooling bills.

Info

Comment

Precious little metal "ice cream" chairs before and after!

I bought these pathetic little chairs at an auction last fall....

...neglected for who-knows how many years in an old outbuilding. Rusted, rotten...so sad.

Then they were neglected for months in my garage because of the "rust issue" I just had no desire to tackle. But I did...and truthfully, it is not that big of a deal (check out how to deal with rust here)....

Then they sat in my garage for ANOTHER month.

They are so darling and I knew I wanted to do something bright and fun with them...I just didn't know what. I get serious mental blocks on upholstery projects!

(I can always tell how long a "project" has been around just by the grass...in the "before" pictures my bermuda is dormant...now it is lush and green and needs to be mowed twice a week!)

So I went to the fabric store and found the brightest and most colorful fabric I could find!

Red for the frame...red is cheerful and fun and since the fabric had every color imaginable, it was perfect!

After dealing with the rust and giving them a good dose of primer (and of course the primer had to cure for a month while I mulled over colors), I sprayed the frames with red spray paint. I cut new seats and backs out of 3/8" plywood and covered them with new batting and the bright fabric .

Here is a little hint...if the "frame" where the back goes is 11", do not cut a new board 11", cover it with new fabric and batting, and expect it to fit. It won't.

The big button (almost) dead center in the flower was a fluke! The original back had a big button and I knew I wanted a button.

So this gives me the perfect opportunity to share how to make buttons for any project...chairs, pillows, headboards! Anything that has or needs a button...you can MAKE one out of any fabric!

Just buy a button kit...they have them at the fabric stores and most hobby stores. There is a template on the back for the fabric cutout and they come in all different sizes....

They are super easy to make! Just follow the directions on the back of the package!

TIP...put a dab of hot glue on the back of the front of the button before you hammer the back on and then put a dab of hot glue on the little U hook on the back of the button. A few times the back has separated from the front or the little U hook has come off the back...the glue just reinforces them a bit!

To attach the button, I measured and located the center of the board, drilled two small holes, threaded wax covered string on a large upholstery needle from back to front, through the front padding and fabric, slipped the button on the string, then threaded it back through and tied it off. Then I put a little dab of hot glue on the knot. Super simple!

I padded the back with a little batting and covered it with red fabric!

I love these little chairs...if I had somewhere to put them, I would keep them! Darling!

When I step outside my comfort zone and go with bright and colorful, I am never disappointed...maybe I should take that into consideration next time I makeover something I intend to keep!

And here is a little "upcycle" hint. I had an old outdoor chair cushion that was thrown in a pile of things I picked up at an auction. The fabric was crud but the batting inside was good. I took the fabric off and used the batting that was inside for this chair and saved the rest for future projects. Free padding!

Info

10 Comments

Universal Ballerina Mist....

When I check on my flea booths I like to mill around and see if there are any goodies I want for ME! I try not to do this often because I do have a hard-fast rule...if I bring something in, I have to take something out.

Every once in awhile I stumble on something I just have to have!

I featured my Grandmother's Universal Ballerina dishes here and here. They are not "valuable" dishes, but ones I treasure because it was my paternal grandmother's. She was not a big "china" person and only had a few pieces of this style. I have added a few pieces here and there over the years.

I love the mist color and the platinum banding and the simple styling. Unlike my maternal great-grandmother and grandmother's very ornate and expensive china (also featured) it is very simple...kind of "mid century-ish" which makes sense since it dates around 1950...and I absolutely love it!

I have never found any pieces in flea markets. I did find another salt and pepper shaker at an antique store one time. I bought it so I would have a set I would actually use! I didn't want to use the original for fear of breaking them! Good thing I didn't because sure enough, I broke one! All the other pieces I have added have been from Ebay or Replacements.com (both great sources for replacing stoneware and china.)

But today I scored a few pieces at the Tontitown flea market!

Two refrigerator jars with lids...both in mint condition!

And a milk pitcher. It is actually the "ivory" color rather than the "mist" but I think it is a lovely little piece and thought it would look pretty next to the other I have in mist!

(Oops...still has the price tag string on it!!)

So today, I broke my hard-fast rule...there is absolutely nothing in this display case I can "take out" because they are all heirloom pieces that have great personal value. So I rearranged a few things and made room for them!

Good thing I don't have a huge china cabinet...

Info

3 Comments

Nasty little chair makeover...PART I!

My INTENT was to get this chair done this week so I could feature it. The weather and a bum back kind of slowed me down. But I got it done...but I am still going to break this up into a "Two Part Series" because the work that had to be done was pretty extensive. If you just want to see the before and after, check out Part II and scroll to the bottom!

This gives me a great opportunity to stress the importance of TAKING YOUR TIME and DOING IT RIGHT!

The simplest little makeover takes time. You can't rush the process. Strip it properly, sand it properly, prime it properly, paint it properly! Otherwise you are wasting your time and money!

My newest project is very similar to a chair I did for Sis....it was one of my first "features" here. (I wish I had taken better pictures to show all the detail!) The paint part was a tad easier because it didn't have to be stripped first. But it was one of my first upholstery jobs, and the more experience you get, the easier it is. Okay, it doesn't get easier...you just know it is going to be a challenge.

One thing I have learned about upholstery...no two pieces are the same and ALL have their challenges. You learn to be creative, take your time, and use the proper tools...more on that when we get into the actual upholstery process!

I spied this pathetic little chair sitting outside an apartment...obviously it was being neglected and unloved! And then it was abandoned! So I tossed it in the back of my truck and brought it home. As with most projects, it sat and waited for inspiration (and time).

I know many tout the virtues of chalk and plaster paint. No sanding, no prep, no prime. But 1) I am old school and 2) the paint on this chair was literally crumbling off and I could scrape the white paint off with my fingernail!

I wasn't going to risk painting this chair only to have the old paint flake off! Besides, I have to have a nice smooth "template." So my best bet was to strip, sand, prime and paint.

First I had to remove the old upholstery. I'm not sure what is worse...a seriously botched attempt to "cover" the old upholstery or doing so and leaving the old upholstery intact. Which means I had to remove the 8,324 staples someone used to haphazardly attach the disgusting green fabric and the 6,352 upholstery nails (these are just estimates) used on the original disgusting fabric.

Regardless of what you are removing...good or bad...I always suggest taking TONS of pictures while you deconstruct. You THINK you will remember how something was constructed, but you may not. It is always good to have pictures to refer back to! When I took my first shot at reupholstering a chair I took hundreds of pictures as I deconstructed it...boy was I glad later when I got stuck on something and wasn't sure what to do! I just referred back to the picture of the original and I knew exactly what I needed to do!

After hours of pulling, prying and cursing, I was down to bare bones (both the chair and my hands!)

Once I got all the old upholstery off, I addressed the little "wobbles." This chair was in pretty good shape structurally but it is important to make sure all the joints are secure and tight. Glue and clamps! Don't move forward on a project like this until you make sure everything is in tip-top shape. You don't want to be glueing and clamping after you have a shiny new finish on!

Now it was time for a little strip job.

I used Citristrip jel to remove the multiple layers of paint! It actually took 2 applications. An old toothbrush on all the nocks and crannies. I used a mineral spirit wash to remove all the "goo." Then I let it all dry thoroughly.

I know stripping old finish and paint is a tedious, nasty, back-breaking process...and I have no doubt it is the reason someone came up with the idea of mixing plaster and paint. But again, my "old-school" mentality just won't let me move forward without properly stripping all the old paint off.

I don't paint over wallpaper, I don't tile over vinyl, I don't upholster over old upholstery. I just don't. Call me crazy.

Then I sanded....and sanded....and sanded! Getting all the old paint out of the grooves in the legs was not an easy task...but absolutely essential! This is exactly why I always keep old toothbrushes with my shop tools!

After sanding, I primed it with Kilz. I like Kilz for several reasons. For me, it is my personal preference after years of experience. Others swear by Zinsser. This is just one of those things you need to experiment with and do what works best for you! Regardless, I will ALWAYS recommend an oil-based primer!

Nine times out of ten I am going to prime a piece before I paint it. I am not willing to take the risk of "bleed through", I want a smooth finish and I want my paint to stick! On rare occasions I will not apply a primer if I am going to use chalk/plaster paint and plan to distress the piece. But even then I prime areas I suspect might bleed through or cause problems.

Anywho, after I got MOST of the old paint off and sprayed on the primer, I let it dry thoroughly. Then I sanded, and sanded, and sanded...again. I started with a 80-120 grit, and finished with a 220.

I like to sand. Or rather I like how the piece feels and looks after it has been primed and sanded. And in my opinion, "feeling" is the key!

Funny story...years ago I was feeling quite smug about the fact that I had not gotten all those nasty little wrinkles all my friends had around their eyes and mouths and on their neck. Until I put my readers on one day to pluck my eyebrows...and there they were.

Even though I finally broke down and got prescription glasses, I still don't trust my eyes to see all the imperfections...but I do trust my hands. As I sand, I "feel." If you can feel it, it will show through a coat of paint!!! Sanding transforms the piece and if done properly, it can mean the difference between having a piece that is beautiful and professional or one that looks like an inexperienced DIYer threw it together!

After priming and sanding, I used my compressor to blow the dust off and then tack cloth to get rid of all the little smidges of dust and debris! I know I harp on using tack cloth...I can not stress how important this step is!

My original plan was to paint the chair a "blush/salmon/coral" color and then upholstery it in black damask. I saw a chair almost identical to this one in those colors SOMEWHERE...and then I couldn't. What I could find was a lot of teal and damask...and since this is a piece that will be sold, I decided I had to go with what is obviously "in." A "pink" chair can be risky! Pretty, but risky!

So teal it is....

The trick to spray painting anything (besides the prep work) is to do 3-4 VERY light coats...let it dry for 30-45 minutes between coats. If you get a drip or run (which you shouldn't if you do LIGHT coats) let it dry OVER NIGHT and then carefully and lightly sand it with a VERY fine grit sand paper! Tack and then lightly spray it again.

After the paint dries I gave it a good coat of clear poly finish. Probably overkill considering the Valspar spray paint I use SAYS it is an "all in one." Again, I'm old school. You clear coat everything.

The key now is to WAIT. Wait and let the paint dry and cure for a few days. Upholstery can put a lot of wear and tear on a piece so you want the paint to be cured before you begin working on the upholstery.

And as you can see, this piece has some serious reconstruction to do before I can ever begin to put the fabric on! I'll make sure I take good pictures and share step-by-step instructions on how to reconstruct and reupholster this chair!

IF YOU WANT IT DONE RIGHT....TAKE YOUR TIME!

Stay tuned! Part II is on its way!

Info

Comment

Nasty little chair makeover...before and after....PART II

(If you just want to see the "Before and After" just scroll to the bottom!)

Okay, so the frame is stripped, primed and painted....(see part 1 of this makeover here)

Now comes the fun part! Finishing it up with the fabric!

Before we start reupholstering, this chair had to have a little "reconstruction."

This chair had a "spring seat." Some will have wood seats. Those are a little easier, even if you have to cut a new piece of plywood. But this one had springs and the twine holding them upright and in position had busted. And one of the nails holding the brace had popped out. So I had to reattach the brace and then restring the springs. Not a biggy, but something you definitely want to get right or the seat will be all wonky.

I used plain ole' twine to restring the springs and I removed the old nails and put in screws. Just personal preference and besides, if the string broke at any time, it would be a lot easier to remove the screws and start over than pry out nails.

If your chair has springs and they are in bad shape or you just don't want to mess with them, they are easy to remove. You can measure and cut a piece of plywood to put down in the base of the chair. Then screw the plywood on the frame of the chair and proceed with new foam and batting.

After fixing the springs, I covered them with a scrap fabric I have in my stockpile (I buy sturdy fabric at garage sales just for this purpose) and stapled it to the top of the seat frame. You can also use muslin or burlap. This fabric holds the springs in place and provides a base for the foam. Again, this is not something you would mess with if you have or add a wood seat base.

Next, you want to measure and cut your new foam. I used 2" foam.

TIP: A few years ago I read a little tip about using an electric bread knife to cut foam. I happened to stumble across one for $1 at a garage sale. For years I have used a utility knife and scissors to cut my foam. Man oh man....I can not tell you how easy it is to cut foam with a bread knife...it is like cutting butter and your cut is as straight as a factory cut....total awesomeness! Why I didn't try this sooner is beyond me...typical "old school" stubborness. Live and learn!

After I cut the foam for the seat, I covered the foam with the scrap fabric and stapled it to the frame as well. Again, just to hold the foam in place and give it a smooth structure.

TIP: Many people try to reupholster using a manual or electric stapler. Forget it. I don't care how hard you try, a plain staple gun (manual OR electric) is NOT going to work. Old wood is just too hard for the staples to set well and you will spend half your time hammering the staples in...provided your hand doesn't fall off first. I STRONGLY recommend getting a small compressor and pneumatic staple gun. You won't regret it! It is one of items I highly recommend in my "Every Woman's Tool Box." Perfect for this kind of project!

The back of this chair is rather simple, but it needed new webbing and support. You can buy burlap upholstery strapping specifically for this type of project, but since I had some scraps of burlap on hand, I made some straps...I just folded it, ironed it and then stapled it place. Just make sure it is taunt. Then I covered the entire back with the scrap fabric to give it a little more support....

Then I covered the back of the chair and the seat and frame of the chair with quilt batting. I use plain ole' quilt batting you can buy at the hobby or fabric store. Just staple the batting to the underside of the frame.

I picked up several rolls of batting after Christmas for 90% off...80 cents each! It doesn't have the "loft" of quilt batting but it works great on places where you want more structure than loft, like on the back of this chair.

Now comes the fun part...actually covering the chair!

Before I began applying the fabric, I made sure I had the piping I wanted to use ready to go. I provided a little tutorial on how to make piping here but you may be able to find a better tutorial online. Use the one that you understand! I HIGHLY recommend using prepackaged bias tape rather than trying to make it out of the fabric you are using. Mainly because you have to cut your strips of fabric "on the bias" which means at a 45 degree angle across the width of the fabric...that takes a lot of work and a lot of fabric. Bias tape comes in a ton of colors! In this case I am using black pipping with a black and beige damask...nice contrast and super easy to make. You can also buy premade piping or trim, but honestly it is a tad expensive.

Speaking of fabric. You don't have to use upholstery fabric but you want to make sure you use a very sturdy fabric. In order for an upholstery job to look "professional" you will be stretching it very tight and stapling it and if you use a light-weight fabric it can easily tear. The least expensive is duck fabric...you can find it at Hobby Lobby or most fabric stores. It is the lightest weight fabric I would use. I have also used drop cloth fabric and it works pretty well!

I usually start with the back of my chair...only because in my opinion it is the hardest and I want to get the most frustrating part over first. Just my preference!

There are a few areas that are a little tricky. One is the arms...here is a little "picture tutorial" on how I deal with this....

To cover the "gap" created by cutting around the arms, I inserted a little "filler" piece. I just folded down and iron the side adjacent to the arm, put a little fabric glue on the back, and stuck it on the chair and stapled. Then I wrapped the front fabric around the sides and stapled it to the back.

I wrapped a double welt trim with fabric glue on the back around the arm and over the fabric where I cut it...and then stapled it to the back to secure it. Here is a great tutorial on how to make this welting. You will notice that the tutorial shows how to make it out of the upholstery fabric. Again, I recommend plain ole' bias tape! If you can sew a straight stitch, you can make this. If you can't, you can purchase it at the fabric or craft store! You won't need a lot for this type of project.

This may seem like a tricky thing to do....patience. Take your time and THINK. And if you stripped the original upholstery and took lots of pictures (like I told you to!) you will have a great reference on how it was originally constructed. It really isn't as hard as it seems! The most important tip I can give at this point (other than be patient and work slowly) is make sure you keep your fabric pulled tight before you staple!

Cover the front first and staple it to the back of the chair. After you have covered the front of the chair, you can add your piping by stapling it to the back of the chair, circling the entire edge.

You may have noticed that this chair has a really pretty curve. There is NO substitution for PLY GRIP. In order to upholster a chair, you have to have it. And you don't need a lot....just enough to go along the top of the chair because it is the only place you will use it. I can tell you craft stores do not carry ply grip. When I reupholstered my wing back I stopped in an upholstery shop and bought about 5-6' for around $1 a foot. When I decided to get serious and do a few more projects I ordered a large roll online from DIY Upholstery Supply. I got 100 feet for $14.00, plus shipping. This site is a great resource for all things upholstery!

In this picture you can see how I stapled the trim around the edge. Then I stapled a little batting at the edge of the trim. Then I applied the ply grip.

This stuff "bites" so be careful. It comes with little holes in it so that you can use upholstery nails, but I just use my pneumatic stapler and staple it on, making sure that the edge of the ply grip is pushed tight against the piping. You only apply it along the top of the chair and about 1-2" down the side. It is very flexible and very easily follows the "lines" of the chair...whether it is curved or straight!

I attached the back fabric along the BOTTOM first. I used upholstery cardboard tack strip to get a nice crisp line. Then I stretched the fabric to the top and shoved it into the ply grip with a putty knife. Start in the middle and work you way to the edges...keep the fabric pulled tight as you work it into the ply grip.

After you have the fabric pushed down into the ply grip, make sure there is no fabric ABOVE the depth of the grip...if there is, just trim it off. Then take a hammer or rubber mallet and tap the ply grip shut. I would STRONGLY suggest putting a piece of scrap fabric between the hammer and the chair as you tap it shut.

As I mentioned earlier, lighter weight fabrics can pose a few problems when used as upholstery. Duck cloth does fairly well with the stress of the tugging and pulling and stapling...but occasionally even it might have a little "tear." I had this happen on the edge of this chair back. A tiny bit of the ply poked through. The only thing I could do (besides start over and that wasn't happening) was dab it with a little upholstery glue to keep it from tearing any more...and then I used a black sharpie to "hide" the little problem. (Again, I AM NOT A PROFESSIONAL!)

Before using ply grip, I strongly recommend spending a little time online googling as many tutorials as you can on how to apply it. You may be totally confused by my instructions...but completely understand another! It really isn't that difficult and seriously makes a huge difference!

"Professional upholsters" use metal tacking strip to fold over the outside edges on the back...not me. I just fold them over and use fabric glue. Probably not the smartest thing to do, but for me it is the easiest...and it holds!

After the top is done, I tackle the seat. In my opinion it is a tad easier. Just lay the fabric on the seat and make sure you have enough all the way around to staple it to the underside of the seat frame. You will have to cut slits on the corners to work around frame, but again, patience...take your time. And keep your fabric pulled tight before you staple. When working with a seat, whether it is a project like this or a simple dining room seat, it is always best to attach your fabric on all four sides FIRST...just put 2-3 staples in the middle of each side, and then start working your way towards the legs.

Also...PAY ATTENTION TO THE DIRECTION OF YOUR FABRIC!! Make sure it is all running in the right direction. I used this damask on another project and discovered that I had applied it "upside down" on the seat. And one time I worked real hard to get a peacock smack dab in the middle of the seat of a chair...only to discover that it was upside down. Frustrating. So check and double check before you start pounding in the staples!

After my seat was completely covered, I edged the entire thing with trim...then I added a simple black fabric to the underside to hide all the innards. I use a cardboard edging on the front of the chair just to get a nice crisp line and then folded the fabric and stapled on the sides and back.