Traditional china vs. Ironstone....

I currently have 7 sets of china in my attic. The "important" pieces of each set are displayed throughout my home...tea sets, serving dishes, pitchers....as well as one place setting of all.

I did not set out to "collect" china. My first set was a pretty pink and green floral I purchased at an auction almost 30 years ago. The set had mint EVERYTHING...salt and pepper shakers, tea pot, sugar and cream set, serving dishes and 12 place settings.I proudly displayed it all in my china hutch until one fateful move...when I didn't get the little pegs securely in the top shelf of the china hutch...and it all came crashing down. No, it did not break the pieces I had 12 of, like plates and cups. Nope...the teapot, the sugar and cream set, the salt and pepper shakers, serving dishes. THOSE took the hit. By some weird alignment of the stars or fate, an older lady we were buying a house from was having an auction and she had the exact same set....including the serving pieces I had destroyed. Wow...what are the odds. Now most are packed away in the attic.

I bought another set of china years later, again at an auction.I loved the colors...browns, oranges, blues. It has the prettiest scalloped edges on the serving pieces! We used them at Thanksgiving for several years until we (I say we...actually Brian is the dishwasher!) got tired of having to hand wash them...now they are in the attic!

And then just a few years ago another set...a simple "white" with platinum edging, decorated with little platinum branches with birdies (if you remember, I have a thing for birdies!) Simple. I bought them for a New Year's dinner party. Much more "contemporary" than the other two sets. Naturally I used them once and then most were packed away in the attic.  

Now the "family" heirlooms are starting to roll in. The first was from my paternal grandmother. She wasn't a "china kind of person" but she had the prettiest serving pieces of the Universal Ballerina in mist from the 1950s....a beautiful greenish-bluish color with a simple platinum edge. So pretty in fact that I began purchasing the dinner plates and bowls and cups. And then I promptly packed them away in the attic with the other sets. 

Then my maternal grandmother's. Then both my maternal great grandmother's. All from Japan or Germany, where my mother's family lived during my grandfather's military career. I get tickled when people make a huge deal out of "Occupied Japan" pieces at auctions...I have an attic full because my grandparents actually lived in occupied Japan in the late 40s! 

Again, I have the serving pieces, a place setting of each and the tea sets displayed but the rest are all packed and labeled in the attic.

So where does the ironstone come in?

Well, since the discovery of blog sites like Miss Mustard Seed and The Ironstone Nest I have taken a fancy to simplistic style of the white ironstone. So much so that when I discovered ONE ironstone bowl in an apartment, I went on an obsessive hunt for more pieces. For years I have loved white dishes because it was easy to add other white dishes when needed without there being a "glaring" difference!  I ended up spending way more than I want to admit to put together 20 dinner plates, bowls and dessert plates for every day use, buying a few pieces at a time on Etsy and Ebay! 

Ironstone is not as prevalent in our area as it is in other parts of the country. I have run across a few pieces here and there but nothing like the northeast where it seems to be in every antique and thrift store...and has soared in value. I have purchased a few pitchers and tureens and dish sets over the years (usually for VERY little), but nothing like what other bloggers report. It just hasn't made a "splash" here like it has elsewhere. The pieces I have sold have often sat for some time and sell for very little.

So I have begun to "hoard" what few pieces I stumble across.

Just last week I bought two pitchers (each thrown in a flat of odds and ends) at an auction.

I also picked up this pretty sugar and creamer set that came with an entire set of ironstone dinnerware. My daughter will get the dishes for her apartment this summer (that should tell you how little I paid for the entire set)...the sugar and creamer set are mine! 

I found this little chipped creamer in a box of odds and ends several years ago and kept it because it was chipped and it is the perfect size for little knock-out roses.

I think I picked up this little set at another auction some time back. Pretty....

And this little pitcher...I like it with the little Gerber daisies in my laundry room!

 

Martha Stewart is credited for bringing ironstone to the fore-front of today's collectors. Her website gives the simplest, most comprehensive, history of ironstone. Well worth the read!

I really love the simplistic styling of the white ironstone. As much as I love and cherish all the pretty china I have purchased and inherited over the years, sometimes I feel like all the "traditional china" kind of gives my home that "old lady vibe." But most are heirloom pieces and are just a few of the Things I Love!

Reupholstering the new living room chair...

I have said it before and I'll say it again...if you ever complain about the cost of reupholstering a piece of furniture, give it a shot! 

Trust me, you will never complain again...and there is a good chance you will just buy new! 

I spent over $200 just for the fabric for this chair!

It's not really "my style" but I wanted to use it to replace the big hulking brown leather chair in the living room and this one was a "freebie"...for obvious reasons. It had to be big enough for Cleo because that is "her chair." 

Perfect fit.

And honestly, with a down cushion and deep seat, it is super comfy! Not that I would have sat in it before it was completely stripped and covered with new batting...but it LOOKED comfy!

There are THOUSANDS of tutorials on line for reupholstering just about any style of chair so I am not going to do a blow by blow tutorial on how I reupholstered this one. Your best bet is to find a tutorial for a chair similar to the one you are going to do. Besides, it took me a day to strip it and removed 2,453,692 staples, a day to sew the cushion cover and all the piping, and another day to upholster the main frame....my hands were in no shape to hold a camera!

My advice...buy a new chair! HOWEVER, if you insist on reupholstering a chair, find a good tutorial and settle in for some serious work!

I do love how this one turned out. I really want to infuse some "lighter-brighter" furniture so I went with the teal/cream print. I like the texture of the fabric and I think it will be very durable which is important since Cleo immediately reclaimed her spot! 

Naturally the new chair means I will have to buy a new rug, but since Katie wants to take the existing rug to her new condo this summer, I have a valid excuse to buy a new one! 

My next upholster project is this little MCM chair in my den....

Seriously, if I hadn't already purchased the fabric, I might have just said to heck with it and wait for the mauve and pale blue to come back in style. Or just buy a new one! But I adore this chair so when my hands regain their feeling, I'll move on to this project!

The weather has been pretty amazing so I have managed to finish up quite a few little projects, in spite of the fact I can barely grip a paintbrush, so I'll share a few in the coming weeks! 

Just another week in paradise....

Me: I lost my truck key but I have the VIN number and need a new one cut.

Dealer Dude: Okay, the key is $177.

Me: I expected it to be pretty pricey.

Dealer Dude: After we cut the key you will have to bring the truck in so we can program it.

Me: Will the key start the truck?

Dealer Dude: No

Me: Then how do I get the truck here to program the key?

Dealer Dude: You will have to have it towed in.

Me: So I have pay to have it TOWED? 

Dealer Dude: Yes, and there will be a $60 charge to program it.

Me: So I have to pay $177 for the key, the cost to tow the truck AND $60 to program it.

Dealer Dude: Yes

Me: (Not something I want to admit saying on my blog.)

Suffice it to say, I had no transportation Wednesday and sat around waiting on Waste Management to call me back to see if MAYBE I inadvertently dropped my keys in the recycle bin that was picked up first thing in the morning. I finally conceded and called a guy to come to my home and cut a new key. Fortunately, I decided to take one more walk around the yard. And there they were...on the brick ledge right where I had laid them. A day of frustration !

I would also like to add that while I have always prided myself in keeping a clean house, I pray no one ever looks under the furniture. N.A.S.T.Y!

My life.

On the upside, I made good progress on my entry. And just for the sake of healing time, I am grateful the travertine tile and new stair treads will not be in until next week! 

Sheetrock repair is done and all the paint is done. The switches may have to wait until Thanksgiving when my SIL comes...makes my brain hurt just looking at all those wires!

I am still debating whether I will just put down new trim or if I want to go all out and add wainscoting or board and batten. I can't decided and since it is the last thing to be done, I think I will wait until the new flooring is down and the stairway is reconstructed before I decide on trim and lighting.

I have finished several pieces lately, and even managed to remember to take a few before AND after pictures...so I will share those in the next few weeks. Until then, I am going to enjoy a weekend with ALL my babies....Sarah is coming in for her birthday and Mitchell is headed home for a short visit! 

TV cabinet makeover...

The bad news is I have had a lot of vacancies this past month...the good new is I have had a lot of vacancies this past month! 

The reason it is bad is because it means I have pretty much had to bust it every day...cleaning, repairing, rehabbing! I. AM. EXHAUSTED!

The reason it is good news is because OCCASIONALLY I find a decent little piece I can work a little DIY magic on. Before I started "rehabbing for resell" I would either toss this stuff or give it away to friends and neighbors....often after spending days rehabbing and refinishing! Seriously, I just gave away stuff! Now I will make repairs, paint, refinish...whatever it takes to give the piece another lifetime of use!

This piece is a prime example...

Dated, worn and just down right ugly. Very similar in style to this piece but a little sturdier so I thought it was worth giving a little makeover! 

This piece was a prime candidate for a little KSTP treatment I shared here.

It originally had a little shelf but it was missing so I cut another out of a sheet of plywood. Other than that, it really didn't need any repairs! I painted the cabinet a slate blue I mixed up using a blue and black latex paint I had on hand, painted the drawer fronts black and the hardware metallic gold. 

I liked the style of the hardware but definitely not the color.

This is one of those pieces I took to "base neutral" (in other words, primed) and then let sit because I just couldn't decided what color to use on it. 

Obviously the colors were okay...it sold 3 days after I took it to 410 Vintage


Simple makeovers for the worst offenders...the KSTP treatment!

There is NO excuse for ugly furniture. With warmer weather just around the corner, it is time to start looking at your furniture with a critical eye and making a list of pieces that CAN be changed with just a little bit of work!

We all have it...those "cheapo" pieces of furniture that are, at the very least, offensive! Maybe they were given to you, maybe you bought them at a "discount" store...maybe you bought it at the thrift store to fill space in a room.

Pressed board construction, laminate tops, dated finishes, pieces you put together with a little allen wrench thingy that came with the worthless little "screws" that promptly strip out and leave the piece wobbly and worthless!

It's ugly and cheap, but seriously who has the money to buy "real wood" furniture when you are struggling from pay check to pay check and having to buy shoes for a kid whose feet seem to grow a size every month.

I get it...I've been there. Fortunately I have learned to shop resale and auctions for "quality" pieces...and even if they need a little TLC, I have the tools, knowledge and time. But not everyone has that...or the money to buy and refinish high quality pieces.

That is why I advocate the KSTP treatment. Let me explain....

First, before you even get to the KSTP treatment, ALWAYS give the piece a good cleaning. On the nastiest, I use ammonia water but some can just be wiped down with a little water and mild detergent. Whatever you need to do to get the gunk off the piece! If it is "stuck" on just scrape it off with a razor! No matter if you scratch the finish...you are going to paint it!

Second, make any and all repairs that need to be made...and if you don't know how to repair it properly, google it! 

Okay, now the KSTP treatment....

K- Kilz (my favorite primer but any QUALITY PRIMER will do! That is why this is the KSTP treatment and not the PSTP treatment!)

For smaller pieces I use a spray can only because it is easy and gives me a nice smooth finish. On larger pieces I use a brush and 4" foam roller! TIP! Always shake the can longer than the directions recommend. Kilz will spray on with a "grainy texture" if you don't shake the can well! No biggy since you are going to sand anyway, but just makes it a little easier! Also, pay attention to the temperature recommendations...it matters!

Many paints SAY they are a "primer and paint in one." Sorry, I am old school....I ALWAYS prime and I personally recommend it. If you want a superior finish that will hold up to use and abuse, prime! 

S-Sand. A 220 grit paper will usually smooth out the piece after it is primed. I wrap a piece around a sanding sponge block!

If you have "ornate" legs or detailing, use 000-0000 steel wool.

USE YOUR HANDS, not your eyes. Feel the piece.

Trust me, if it isn't smooth, it WILL show after you paint it! Sand it until it is smooth to the touch! If you cleaned the piece well, scraped off all the gunk, this step really should only take a few minutes.

T- Tack cloth. A MUST after you sand but before you paint (or apply any finish). Blow or brush off as much as you can, then use a tack cloth!

You can purchase it at your favorite home improvement store...usually in packages of 2 and relatively inexpensive (around $2)! You can wipe a piece down all day with a clean cloth, but you WILL leave "stuff" on the piece if you don't tack cloth it. Tack cloth will remove EVERYTHING. If you still feel "stuff," hit it with the sand paper again and then tack cloth again! 

P-Paint. This is where people usually freak out. My favorite for wood or laminate furniture is oil-based but it can be a tricky paint to work with for a novice and difficult to clean up. Fortunately latex paints have come a long way and are much more durable these days! QUALITY spray paint is probably your best bet for smaller pieces. I say quality because you can buy spray paint a tad cheaper at discount stores, but I am not a huge fan of cheap paint for ANY project! I usually buy Valspar or Rust-oleum from Lowe's.

On smaller pieces of furniture the difference will only be a few dollars but will be worth it in the long run. 

Each of the brands come in LOTS of great colors...just find the color you love! I have found very little difference between the two brands...the Valspar tends to dry a tad quicker....but both are quality paints! ALWAYS shake the cans well and follow the directions on the can!!! 

I have followed every tip in the book to get rid of the occasional "striping" on large, flat surfaces...like dresser tops or table tops. It doesn't seem to matter how I spray, what the temperature is or how hard the wind is blowing...sometimes I get stripes.

My solution has been to purchase the little "sample pots" of paint custom mixed to match the spray paint I am using and roll it on the large flat surfaces with a 4" foam roller! 

Penetrol and Floetrol are a MUST any time you roll or brush on paint...oil or latex!

Use it. It will eliminate the brush and roller marks and give you a MUCH smoother finish! 

These are just a VERY few projects using the KSTP treatment (I have done hundreds!)....world of difference for a little bit of work! I am working on a piece right now that is in the S stage...primed and sanded but now I need to figure out what color I want to paint it...soon!

 

Even light fixtures and paddle fans can be spray painted!!! On metal pieces and furniture hardware, I use metal primer primarily for the "rust retardant" factor!

One last important TIP when using ANY technique to paint anything....ALWAYS give the piece time to cure before you put it to work! 

I was always skeptical of those "two day" makeovers they did on tv where they would paint something and then "stage" the pieces with all kinds of stuff within hours of putting a final coat on. (Kind of like getting your nails painted at the salon...even though you dry them for 10 minutes, you are still going to ding them if you dig in your purse for your keys! Unless you get gel polish...awesome stuff!) Trust me, that is the fasted way to ruin a finish! Don't do it...be patient and give the paint time to harden (cure) before you set a lamp on it or try to hang the fixture (trust me...I have had to repaint many pieces because of impatience!) 

One dated, nasty, cheapo piece of furniture can ruin an entire room. Toss it or paint it! YOU CAN DO IT!

*I have not been compensated for pimping these products! These are the products I use and work for me!!!*

Dining room table makeover and my recent angst!!!!

Choosing fabric for a piece for "resale" is a tad easier for me than when I have to make a decision for my own home! It is still a struggle, but not nearly as difficult as choosing a fabric for myself.

Primarily because I know how much work goes into reupholstering a piece and I know if I go too "trendy" I will end up having to redo it in a few years. It is one reason I "stay safe" with bigger pieces like couches and chairs...then I use throw pillows, blankets and rugs to pull in the "in" colors. Those things are easy to change...and I don't cringe too much if I have to donate a $15 pillow vs. a $2000 couch! 

Example...I bought this ugly table and chair set at an auction....

In this condition, not appealing in the LEAST and not fit for any space...very dark and dated! But this is the kind of thing I know I can work a little "DIY magic" and make it perfect for another lifetime of use!

Not that I don't struggle with deciding paint colors and fabric for these pieces...this one sat for a while. I knew I would have to paint the top...it is laminate so it couldn't be "refinished." The legs on the table and the chairs are solid wood and in halfway decent shape but the vinyl brown seats had seen better days....that had to go!

I chalkpainted and distressed the table legs, primed and painted the top a flat black and painted the chairs a "steel blue." I found an awesome black/grey tweed upholstery fabric for the seats.

I saw several tables on Pinterest with this upholstery nailhead detailing and knew immediately I wanted to do it when I found the perfect table...and this table is perfect!

That little detail really makes all the difference, was relatively inexpensive (about .50 each!) and was not difficult. I just measured and marked where I wanted each nailhead to go, drilled a tiny hole, then hammered them into place! Cute as a bug's ear!

Obviously someone else thought it was cute as a bug's ear...it sold the day after we took it to 410 Vintage.

Which brings me to my recent angst! Chairs for my own home!!! 

When I remodel my den last year, I knew I wanted to add a teal club chair. I bought this little MCM style chair a year ago and it has sat in my den since, waiting on time and inspiration! It is the perfect size and style for this space, but of course the upholstery is all wrong!

I finally went to the fabric store last week and pulled a bunch of fabric samples that caught my eye. I THINK I have decided I like this teal tweed fabric. This fabric works well with the style of the chair and is pretty much the color I was leaning towards.

I found this chair just last week and I THINK I want to use it to replace my big fat leather chair in the living room!

It is a tad more "traditional" than what I really like but that is okay...again, that is the great thing about having a mosh-pot of styles...or "eclectic" as they say!

One of the reasons I want to replace this chair is because it has become "the dog's chair." In other words, Cleo has claimed it as her own. She sleeps in it, sits in it and jumps on it when anyone comes to visit her (and EVERYONE is coming to visit HER!) As a result, it is in pretty bad shape.

So naturally, she has to check out the new chair to make sure it is comfortable FOR HER!

Not nearly as roomy as the leather chair, but she looks pretty comfy!

Again, fabric samples and nail biting choices....

I kinda sorta like the idea of doing a "two fabric" design. The grey geo on the sides and back, and the black for the cushion. But then again, I worry about being "trendy" with something that is going to require a lot of time and work, so I am leaning towards the simple, one fabric choice in blue. 

What to do, what to do. For now I am taking my own advise. Looking to Pinterest and Google search for "inspiration."  Looking for chair upholstery I LOVE that will work with this style and in my space! 

It is the ONLY way I know how to make a decision and know it will be one I will be happy with for many years. 

Mid century chest makeover....

On rare occasions I find a little treasure hidden among all the garbage my tenants leave when they move in the middle of the night! I found this little table years ago and it started my love affair with Lane Acclaim tables....

It did NOT look like this! I remember I picked up the nasty little thing and started to toss it in the back of my truck. But it was sturdy and I could see quality through all the "muck" so I brought it home. I googled the markings on the underside and found that it is a walnut and oak Lane Acclaim table manufactured in 1959. With a lot of elbow grease and a little tung oil, it is now one of my favorite little "treasures." Along with the others I have purchased and restored over the years. Still waiting on the desk and a round end table...but someday...

Now I look at furniture I find a little closer. 

This dresser is one of my recent finds. A true mid century piece. Completely intact and sturdy as the day it was built. Unfortunately someone had done a REALLY bad job painting it!

I cleaned it, primed it with Kilz, sanded it and wiped it down with tack cloth....then I painted it with one of my favorite flat "charcoal" greys. The ole' KSTP treatment! The drawers were in mint condition and just needed a little cleaning!

Beautiful! Because of the style, I kept the finish simple. While I hesitate to paint MCM pieces, this is a prime example of "enhancing" a piece. 

Now I am going to share a little DIY frustration because I know I make this stuff LOOK easy sometimes. I first painted this entire piece with several cans of Valspar flat spray paint. I like spray paint because I normally get a nice smooth finish. For some reason I kept getting that "stripped" look on the top and sides...the drawers looked fine. Not a problem I normally have with flat finishes when the temperature is decent. I ended up buying a quart of latex flat paint, mixed to match, (and added floetrol...a must!) and used a 4" sponge roller to get a uniform finish.  Worth the extra effort!

I know I have said it a thousand times....don't overlook those "ratty old" pieces.....neglected or abused or poorly "restored." With a little bit of your time and attention, they can be beautifully restored and ready for another lifetime of use! 

This week I will be sharing this project at...

I was featured on Remodelaholic

...love their features and their site! 

 

A simple TV cabinet makeover...

This is the second year in a row I have been sick around Christmas. Fortunately, last year it was AFTER Christmas. This year it was BEFORE Christmas. Not good when I have so much to do the week before Christmas! I knew I felt bad Tuesday when I was out building fence (the wind did a number on my privacy fence at the apartments) but I didn't realize how bad I felt until I came home and sat down.

Now I have a list of things to do...presents to buy, a few things to return, wrapping boxes to hunt down, presents to ship, grocery shopping....and I feel to cruddy to even drag myself into the shower! Fortunately I THINK the worst is over so hopefully I'll feel like getting around later today!

In the meantime, I thought I would share another simple little makeover.

Remember all that dated, uninteresting furniture I keep harping on you to paint or do SOMETHING with! Well, this is just another example of a piece of furniture that no longer has a place or a purpose in our homes...unless you roll up your sleeves and give it a little makeover.

The dreaded old "tv cabinet" ...or "hutch"....or whatever you want to call it!

Here I shared how I acquired this less-than-interesting piece and how I used beaded craft board to start this simple transformation!

I gave the inside a KSTP treatment with my "go to" off-white and gave the outside a little plaster paint/dristress treatment. But it still lacked "character" so I wiped down the entire cabinet with walnut stain. That changed the color from a soft "teal" to almost a "greenish" color but it also added depth to the finish! Kind of a "patina"....

I sealed it all with poly and changed out the hardware. Actually I painted the original round knobs black and added black cup pulls to the bottom drawer! Remember, if you are changing out hardware, you may have to patch some holes BEFORE you paint. In this case I had to do just that since the holes on the bottom drawer were 3" apart and the holes for the cup pulls are 2 1/2"...no biggy! Just patch them with wood filler, sand and then paint....then just drill new holes for the new hardware!

It would be simple to reinstall the doors...but in this case I decided to go with an "open shelf" look! 

Simple little update! Now this little cabinet is ready for another season of life! 


Another day, another project....and a new venture! And my annual HOLIDAY CHALLENGE!

My neighbors, Kenny and MaryAnn, bought a beautiful antique dresser. The problem with beautiful antique dressers is they usually need a little work. Ever watch the tv show "Botched?" I should do a show about "botched" repairs on old furniture because 9 times out of 10 someone else has already tried to "fix" little problems, only to create much bigger problems.

In exchange for a few hours of work and a few choice curse words, MaryAnn gave me this little pine cabinet....

IMG_7489.JPG

At some point Kenny had removed the back and like me, had NO idea where he put it. That is okay...I have "repurposed" little cabinets like this before and one of the first things I do is remove the back and replace it with something with a little more "character."

This tung and groove "craft board" is perfect for adding a little "pop" to otherwise boring or dated cabinets. Since I decided to remove the doors and turn this into an "open shelving" unit, I knew it needed a little something....

Rather than paint the boards a solid color, I usually do a little "white wash" treatment on them in whatever paint color I plan on using on the exterior. I painted the inside of this cabinet my favorite off-white color and plan on painting the outside a soft teal. 

The first thing I did was cut the boards down to the size I need for this project. Then I just dip my paint brush in water, then dip it in the paint, brush the boards, then wipe them with a damp cloth....

This allows the grain to show while still giving the boards a little color. After the boards dry, I spray them with a clear coat. 

I put a tiny bit of glue in the "groove" of each board. Not a lot or it will ooze out and make a mess...a little glue goes a long way...and fit them together one at a time across the back! 

I use my pneumatic stapler to attach them to the cabinet....

This board is so thin you could probably attach it with a manual stapler if that is what you have handy!

This bead board really does dress up and update these old cabinets..

IMG_7529.JPG

Now all I have left to do is paint the exterior and replace the hardware...I will make sure I share the transformation when I get it finished!

I recently used this same treatment on a huge old ugly (but very solid oak) cabinet I hauled home from the apartments. 

I decided to use it for display in my new "room" at 410 Vintage

Yep, this is my "new venture." An entire room at 410 Vintage, rather than just a booth!

IMG_7466.JPG

This is just a little sneak peak at my new room...you can see the amazing ratan chairs that started out in a total state of FIX ME!!!!

(I had several dining room tables that where set all pretty for Christmas...neither lasted a day!)

IMG_6625.JPG

A couple of little side tables that had a bad case of the uglies...

They both just needed a little TLC...

I have filled this room with my auction treasures and furniture rehabs...its is a fun space!

If you are local and have not checked out 410 Vintage in Fayetteville, you really should drop in! The owner has one side filled with "mid century" awesomeness and the other side of the building are spaces filled with anything and everything vintage, retro, antique and wonderful! They have an Instagram page that is updated several times a day with new arrivals. I don't have an Instagram page but if you do, you might want to check it out!

HOLIDAY CHALLENGE!

This is the time of the year when I want to remind you of my "HOLIDAY CHALLENGE!" Our family use to do the Angel Tree every year and always enjoyed buying gifts for our "angel." But as the kids have grown and have less time to shop with Mom, I have encouraged them to find their own way of giving. For me, it is random giving. Every year I set aside 5 $20 bills...and I wait. At some point during the season, I will run across someone who will have a "need." Maybe at the grocery store...or the car hop at Sonic. One time I was getting gas and I felt the person at the pump next to me could probably use gas money. You never know...if you open your heart, you will know when to give! 

If you don't have a lot of cash to give, give of your time!

We may not have everything we WANT, but we always had what we NEEDED! It feels wonderful to be able to give back...even if it is just a tiny bit! 

Updating a little chandelier...

I am almost embarrassed to admit where I got this ugly little brass chandelier....

Out of the back of a strangers pick up truck at the dump. Seriously...I was paying out at the local dump and this guy drove up in a truck loaded with trash. Sitting on top was this light fixture. So I asked him if I could have it...and he said SURE! 

Geez...I have become one of "those" people who dig through other people's trash! Crazy cat lady, annoying coupon lady...and now this...(shaking head in disgust)

Whatever...I wasn't sure what exactly I was going to do with it but I knew it could be "updated" if I could just find the right inspiration. I knew I was going to paint the dated brass, so I decided to start there until I could figure out exactly what I wanted to do with the fixture!

Originally I primed it with metal primer, then started painting it with plain ole' off white spray paint. (Remember, when you aren't sure what to do with something, take it to "base neutral.")

And that is when a little DIY project turned into a total disaster. Yes, it happens. Even to me. Even though I shook the spray paint can per the instructions, it still started spraying all "clumpy." I don't know how to describe it, but rather than a nice smooth finish, it was all grainy and rough....AAAAGGGGGHHHHH! 

Made me so mad I tossed the fixture in the back of the garage and said "SCREW IT." (Yes, I curse at innate objects!) I knew I was going to have to completely sand it down and considering the "ornateness" of it, I knew it would be a royal pain. My "vision" was just a heap of "mess." 

Then I saw this on Pinterest...

Andrea at  "Personally Andrea" took a plain ole' chandelier and dolled it up a bit by using jute twine to wrap the ugly little plastic tubes. 

Hum....just the "inspiration" I needed to dig the "ruined" chandelier out of the back of the garage and give it another shot! 

I sanded down the "grainy" finish, reprimed where needed and then painted it in my current favorite teal spray paint! (This time I shook the crud out of the can AND test sprayed it!) 

Covering the ugly plastic tubes is super easy. Andrea used tape, but I used hot glue. I ran a little line of hot glue along the tube as I wrapped it in the jute twine.

WORD OF WARNING!!! Hot glue is HOT...and the plastic sleeves are a tad flimsy so use the glue sparingly or you will actually melt the little tube which will make it impossible to slip back onto the light. (Lesson learned the hard way...fortunately Lowe's sells replacement socket covers for under $3 a pair!)  

I think painting the fixture in black or oil-rubbed bronze would have made it a little more "formal." But I was going for "fun" and "hip" and a little more casual! 

I liked the look so well I decided to do the same to my dining room fixture using the plastic covers I purchased at Lowes!

I found some glittery gold fabric/paper kinda looking stuff at the craft store that I am going to use to cover new socket covers for the Christmas holiday!  I will share that later when I do my Christmas decorating! 

Don't turn your nose up at the dated brass fixtures...as I have shared many times fixtures, lamps and fans are super simple to update with a little paint.

And of course a little inspiration! Thanks Andrea!