Another mid-century chair....

I don't know too many people who would see this ratty old chair and swoon....

...but swoon I did. And to make it even better, there were TWO of them! Yes, two.

Katie TRIED to claim them both but I had to keep one for myself!

The cushions are the original black naugahyde, which is super common on mid century chairs. Fortunately they were in pretty good shape...not perfect but close enough!

All I did to both chairs was strip and oil using this process, scrubbed and applied Armor All to the cushions, and BAM....BEAUTIFUL!!!

I told Litty to move so I could take pictures and even nudged her with my foot. One thing about cats...they don't mind well! (A friend told me they had mice...I told him to get a cat...he told me he didn't like cats...I told him the cat wouldn't care!)

Someday I will actually learn to use my camera so you can really see the amazing grain detail in these pieces!! Beautiful!

One of the chairs had a little "boo-boo" on the back...a little glue and some clamps fixed it right up! No biggy! DO NOT be afraid of a sturdy piece of furniture that needs a little repair...if you take the time to do a little "google" search and watch a few Youtube videos, you can pretty much repair anything properly!

Soooo....I kept one and one went to Little Sister's new condo. Next week I hope to share the desk I made her, the tufted chair we upholstered and a super cool coffee table she refinished! Her first place is shaping up to be super cute and this little chair was an awesome addition!

Until next week....

Info

2 Comments

Heirloom stool....

I know I probably sound like a broken record, but I don't decorate with just anything...the "stuff" I decorate with has to be things I love or heirloom pieces!

A few years ago I picked up a couple of stools and dolled them up a bit and featured here.

The one I liked most was the one with the birdies...but every time I wanted to open a kitchen drawer I had to move it. So I sold that one and have been using the yellow stool.

But this past Christmas, when I was hauling decorations out of my packed attic, I spied an old stool that had belonged to my great-grandfather. I believe it was the stool he used at his drafting table. I have had it for years but it was in pretty bad shape, so I had stuck it in my attic and pretty much forgot about it.

I finally hauled it down to the garage and decided to give it a little makeover. The first thing I had to do was strip and oil the oak base using this process.

I had a little leftover fabric from this chair project so I decided to use it to recover the seat.

Did I take a "before" picture...um...no. Just imagine...old, dated, well used.

The upside is it fits perfectly under the kitchen drawers. Now I can use this precious family heirloom!

Oak is not my style...but anything that belonged to family is...another "thing I love."

HAPPY BIRTHDAY KATIE!!!!

I want to take a minute to wish my precious, beautiful, smart, funny, talented youngest daughter a very happy 19th birthday...I can't believe you are entering your last year of teenhood! I have no doubt this next year will be as amazing as the last 19! You make a mama very happy and proud!

Info

Comment

Entry and stairway makeover reveal....

I started my entry way makeover here when I shared the "demo" of the coat closet! I did not realize this "weekend" project would drag out for TWO MONTHS....but that is pretty much the speed I work at around here these days!

Time flies when you are having fun!

I had intended to post this project last week but Brian had to have shoulder surgery so his care has taken up a bit of my time. (Someone explain to me why a 53 year old man feels the need to bench press 275 pounds...even if he can!)

Truthfully, it is not fun to demo and construct in a house you are living in. I put up plastic when I did the major sanding on the sheetrock...

... but there always seems to be a little spot here and a little spot there that needs just a little bit of sanding...before you know it it looks like a dust storm has blown through your house!

Truth be told, this "makeover" actually started YEARS ago when I removed all the carpet from my stairs and put down oak treads and risers. I knew the day would come when I would not want to haul a vacuum cleaner up and down the stairs (that day is here!) so I wanted hardwood stairs!

My house had the typical "rough construction" stairs with pine treads and risers, covered in carpet...you can kind of see how they were constructed, and what I discovered when I pulled the carpet, in this picture....

It really was not that difficult to install new treads and risers. The biggest "hum" was finding that the 2 x 12 tread (the horizontal board you step on) lipped over the riser (the vertical board facing each step) by 1/4". To solve for that, I just applied strips of 1/4" board to the bottom of each riser and then faced them with new oak boards, cut to fit. Most home improvement stores carry prefab oak treads. I cut each to the width I needed, stained and sealed them, applied construction mastic and then nailed them into place. I applied one final coat of poly after I had installed them. Obviously I did a good job, since it took me TWO HOURS just to remove TWO of the stinking things!

Since I was installing new travertine tile in the entry, I decided now was the time to also make some changes to the newel post and bottom steps.

As with EVERY project, the first thing I did was "find my inspiration." That was not difficult since I knew from the minute I laid eyes on Cassidy's stairs on Remodelaholics.com that this was what I wanted....

One of the things I really love about her staircase are the colors...the stain and the paint. Sadly THAT little detail is going to have to wait at my house. My staircase was stained to match the living room floors, which are going to be here a tad longer ...and while it isn't "technically" honey-oak, the "butterscotch oak" isn't really my cup of tea these days. But again, it is going to have to wait for now...the thought of taping and staining and painting everything right now is more than my brain can process!

This is one of the important keys to remodeling any space...identifying what you can do (physically and financially) NOW to enhance the space...and patience! I knew I wanted the "openness" of the bottom two steps and a larger newel post. Those are things I needed to do before I installed the %$(@# travertine tile (Honestly, don't ask how much it cost. I have NEVER in my life paid THAT much for tile, but I wanted it and it is a small space...so I splurged!)

While I had intended to post a "tutorial" on this project, I realized it is like many home improvements...a puzzle that will probably differ depending on how your home was constructed and what materials were used.

So let's start at the beginning...what WAS there.

A tight entryway that required us to lift anything over 28" wide over the newel post!

A coat closet that was NEVER used and was basically just a dumping ground for anything and everything! Hardwood flooring...NOT a material one should use by an entry door. Over time wet feet will do a real number on it!

An anemic newel post that pretty much screamed 1999!

So were does one begin a sizable project like this? Again, how do you eat an elephant? One bite at a time!

So the first thing I did was demo the coat closet and remove the smaller built in bookcase...gut wrenching details here.

After the closet was gone I had to deal with moving electrical wires...a major chore for me and I would honestly suggest most call a professional. My electrical professional is my son-in-law, but since they live 2 1/2 hours away, this is another project he talked me through over the phone! After all the electrical was moved and I could move around in the space without whacking my head on dangling switch boxes, I removed the existing baseboards and hardwood flooring.

Easy right? Um, no! First I had to mark and cut a line with my skill saw where the new flooring would meet the existing hardwood. Dust storm number one! Then I had to scrape up all the old flooring and mastic...seriously, I think you could safely attach wings to a plane with that glue!

Next, I tackled the sheetrock repair and texture...hence the tarp to prevent a MAJOR dust storm!

Since I was basically "patching" the sheetrock where I had removed the closet walls, I used this process! I can not stress enough how easy sheetrock repair can be if you follow these steps. Since the area I needed to texture was much larger than just a little patch, I used a "sheetrock hopper" to blow texture on the walls. I actually had a painter friend come over and help me with this step since he is a master at using the hopper and could "blend" the old with the new seamlessly!

Then paint! I can't say it enough...there is a huge plus to knowing the exact formula for your paint. Someday soon I really want to repaint my downstairs....someday! Again, can't wrap my brain around that chore! But knowing exactly what I painted the walls with 8 years ago allowed me to paint the new patched areas and blend it with the "old."

After the walls were repaired, textured and painted, it was time to tackle the BIG project...the staircase. That had to be done before the new tile could be installed because I was moving the existing newel post that sat at the bottom of the stairs and extending the bottom step, which changed the layout of the flooring.

The first challenge...matching the existing stain color (as much as I dislike it!) David, at our local Sherwin Williams, usually does a bang up job of matching existing stain. He did an AWESOME job on my kitchen stain! This time even he struggled. I think the biggest problem is that the original clear coat is poly...and poly "ambers" over time, which deepens the color. I ended up using David's "match" mixed with a premixed stain and final got a decent match. I stained and sealed all the pieces before installing!

The next big head-scratcher for me was figuring the exact angle and method to cut the existing bannister, trim and bottom rails without removing it all. After much hymning and hawing and measuring and drawing, I drug out every power tool in my arsenal and made the cuts! And did a little sanding to get a good tight fit! MAJOR dust storm!

I also had to build a new "base" for the wider bottom step. As I said, it's a "puzzle" and sometimes you just have to measure, figure, plan and execute as you go...when you are meshing new with old it can be a little more challenging than starting from scratch!

Again, I could post a long drawn out tutorial...but honestly Google and youtube are all you need. You will find much better videos and tutorials than I could ever provide.

And this is pretty much how it sat for another week. Why...because the old adage "measure twice, cut once" only works when your brain computes properly at least once...if it computes improperly BOTH times, you will cut your special order materials wrong and have to wait on them after you reorder them!

As soon as my special REorders came in and I was able to finish up the two steps and newel post, I installed my travertine tile. Then...it sat...AGAIN!

Why...well because I couldn't decide whether I wanted to add a little trim detail. I contemplated shiplap...maybe a decorative wainscoting...or maybe board and batten.

In the end, I went with the board and batten. I'm not totally swooning over it, but it is a nice little touch (again, find a GOOD tutorial if you plan on adding this...there are hundreds of great ones out there in blogland!)

Soooo....drumroll......get ready for a lot of pictures!

Okay...you may notice that other than a funky rug and the little walnut table, there isn't any "froo-froo" yet. As I have said before, I don't decorate for poops and giggles..."stuff" has to have some meaning or be something I truly love...and so far I haven't found either for this space!

Eventually I also want to change/add lighting... I'll know it when I see it!

I seriously love the travertine tile. I laid it in a "brick pattern." It is a 12x24 tile so I staggered it 8-16-24". I also sealed it both before grout and after, which in my opinion, is a must for travertine!

I still need to put one more coat of poly on the bottom two steps and the newel post but I am waiting until Matt is gone for a few days so I don't have to worry about anyone going upstairs!

HUGE difference!

While I was making a few entry changes, I thought it was about time to order a new rug for the living room. The old one was only two years old, but with the addition of the new living room chair and post-Cleo-puppy, it was time! I decided to go with simple and neutral this time!

Aside from the wall paint I want to change, and the "butterscotch oak" I would like to restain, and the new hardwood floors I want to install and the new lighting I think would look good in the entry, I'm pretty darn happy with the changes.

One upside to the "dust storms" this project created was it forced me to "purge" ALL my bookcases, even the ones in the den and my room....dust goes EVERYWHERE when you project! I had to pull all the books to clean so I decided it was time to get rid of 30 years of collecting! I saved two collections of my favorite authors (most notably my autographed John Grisham collection...thank you Matt!) and a few of my favorite books, but over 150 hardback books will soon be finding a new home...right now they are packed in egg boxes in my dining room! Now most of my shelves are scantly decorated with antique books, framed photos and a few family heirlooms!

Ahhhhh....room to breathe.....

Info

5 Comments

Mid Century Chair Makeover and the trick to sewing vinyl!

Recently my mother has been on a purgefest. As a result, I have inherited a few beautiful pieces of furniture and several sets of family china.

This little table was one that belonged to my paternal grandparents and is the catalyst for my entry makeover that I will finally share next week.

Not really my style, but again, it combines two of my first loves....heirlooms and walnut!

This little chair belonged to my maternal grandmother...so when my mom offered it to me I honestly could not get it in my truck fast enough! THREE of my first loves....heirlooms, mid century AND walnut!

(Again, excuse the quality of the picture...this is from my phone!)

As much as I would love to keep it, Katie tagged it for her condo. Since neither of us were real keen on the finish or the fabric, I immediately put her to work stripping and oiling the frame using this process and finding a new fabric for the cushions.

After looking online at similar mid century chairs, she decided to go with a "leather look" white vinyl. Beautiful, but the fabric has one serious drawback.

It wouldn't go through my old sewing machine! (When I say old, I'm pretty sure I bought it before my oldest son was born...28 years ago!)

I have used vinyl and naugahyde before, but always for recovering chair seats...like these mid century dining chairs! I had never actually used it for a sewing project. I discovered that the vinyl-like material was NOT going to glide through a sewing machine, which posed a real problem when one needs to make new covers for a cushion, including all the piping!

My uber smart, engineering minded daughter came up with a perfect (all-be-it tedious) solution. Wax paper!!!! I encased the strips of material I was using to make the piping in strips of parchment paper (that's what I had on hand and it worked just as well!), and it went through the machine like butter!!

Since the vinyl had a fabric backing, it was not an issue to sew the cushions together since I was sewing the fabric front to front...so the back of the fabric was what was feeding through the machine. The only real problem was when I was making the piping because I was having to sew on the top of the fabric....that is where the parchment paper came in handy!

I covered the old foam with new batting just to give the cushions a little extra loft! Eventually Katie wants to add two little "button tufts" to the back cushion!

After all the tedious machine work, the cushions turned out beautiful!

Katie has stripped and oiled her new coffee table, I built a little entertainment cabinet and coffee bar and we still have another little tufted barrel chair that needs to be reupholstered. Move in day is this weekend so we may not have everything done but we are getting there! I have been buying kitchen ware at auctions and thrift stores and their kitchen should be well stocked! Exciting time for my baby girl!

And when we get done with all our little projects, they will have one groovy pad! (did I just show my age...lol!)

Until next week when I FINALLY share my entry makeover....

Info

3 Comments

The unwanted chair....

I run a shelter for unwanted furniture.... injured, abused and neglected. Before a neighbor hauls off a piece of furniture, they usually call me first to see if it is something I might want. Or they just drop it in my driveway...I have come home on more than one occasion to find an abandoned piece of furniture on my door step!

My next door neighbors brought me this busted chair a few months ago.

The chair my neighbor, Paula, brought me was a little on the "formal" side...needlepoint fabric, upholstery nail heads, intricate carvings...but it had a busted leg. . Fairly easy fix for me...a little glue and clamping!

The hardest part of redoing these chairs is removing the billions of tiny upholstery nails. I ordered those nifty staple and nail removal tools. Forget about it! In the end I used a flat head screw driver, a hammer and needle nose pliers.

After I removed all the nails, staples and upholstery, I chalk painted, distressed, and sealed the wood frame and then reupholstered it. These little chairs really don't take a lot of fabric so I decided to use some scraps I had on hand from another project!

The fabric may be a tad "casual" for such a regal chair, but personally I think it brings it down a notch...not so houtie-toutie!

Rather than use upholstery nails, I went with gimp trim...much simpler!

I've been pretty swamped the past few weeks. My oldest daughter graduated from college and my youngest daughter moved home for a few weeks until her condo is ready. In the meantime, we are building, stripping, upholstering and painting pieces for her new home.

One thing about little sis...she is learning that if you want something nice, sometimes you have to roll up your sleeves and do a little work. A lesson my dad taught me! Her first major project was this oak library table....now I think she has "the bug!"

So this past week Katie has been a busy little bee (funny since she actually raises bees!) She even attempted to make a dove tail coffee table...after all, she watched youtube videos and it didn't look too difficult. I tried to tell her those guys have been doing that kind of detailed work with VERY sharp tools their entire life. After she dang near sliced two of her fingers off with a chisel she decided to put that project on hold for a time. I ended up buying a beautiful MCM coffee table and she promptly went to work stripping the old yellow finish off! I am making her entertainment cabinet and we still have a few chairs to reupholstery!

Busy, wonderful time. I have several "resale" projects I need to be working on but I have learned that time with and for my kids is what is really important. I can't remember 1/2 of the stuff I have repurposed and sold over the years but I remember every skill my dad taught me.

There are things that will last a lifetime...and beyond.

Info

5 Comments

Serpentine dresser makeover...

I want desperately to share my entry makeover, only because I want desperately for it to be done. Week 5 and I am STILL waiting on materials...specifically ONE stair tread that somehow did not get ordered properly. I have one, I have all the risers, I have a new newel post, and the tile was delivered over two weeks ago. But like so many of my home DIY projects, there is one little element that isn't here and I desperately need to finish. Pooh!

So today I will share one of the pieces I told you about a month ago!!! I picked up several wash stands and dressers at an auction and all were in desperate need of a little "DIY magic!"

First, and most important, always make sure whatever you are getting ready to spend your time and money on is in good repair. This little serpentine dresser needed some glueing and clamping before I could get down to the business of making it pretty!

It wasn't in horrible structural condition...just needed a little glue and clamping in the back and a few of the drawers.

I used this process to strip the top...again, I have to have my "wood fix." These tops are super easy to strip and if the color isn't just right you can always apply a coat of stain....I added a coat of walnut stain to this one! Then just oil or poly, depending on your preference. I prefer tung oil finish but for resale I often use poly since most people know how to care for poly finishes!

I didn't fill the gaps or sand out the "imperfections" ...I wanted it to look like what it is...a solid old oak top!

The drawers and cabinet could have been stripped and refinished as well, but for resale I kind of have to "go with the flow." Paint is the "thing" right now so I gave it a few coats of plaster paint, distressed and then sealed with poly. Again, I never wax a piece and poly has just enough "yellow" to give the paint an "aged" look!

Simple new hardware, and it is good to go for another lifetime of use!

Pretty!

This is a busy and exciting week around our house! My youngest daughter finishes up her first year of college and will be moving home until her condo is ready next month. My oldest daughter...wife, mom, part-time paralegal...will be graduating (WITH HONORS!) with her associates degree on Saturday. So proud of both my precious girls!

The last time my oldest son was home, we managed to get a picture of all five!

Yes, they are as amazing and awesome as they look! I know this past weekend was Mother's Day, but these kids make me feel loved and special EVERY day!!!

Info

5 Comments

Reviving old cutting boards...

I have featured old cutting boards on several occasions...here and here. They are relatively easy to find and simple to "revive!" And super cute to decorate with!

If you check out my kitchen reveal you will see I use them in several places in the kitchen...as a little chalkboard, as a recipe holder and for a back drop in my "baking corner!"

As I have said before, I don't use wood cutting boards in my kitchen...I prefer the marble and vinyl cutting boards for sanitary sake. But old wood cutting boards can add a real touch of warmth to any kitchen and you can often find them in a variety of woods...maple, mahogany, walnut, and oak!

This first board is a tiny little thing I found in a box of auction goodies. First I stripped the board using this process, then I chalk painted the handle and distressed it a bit and then I added a little something extra!

Adding this little transfer was super simple. I printed out the design, traced it onto the board using sewing trace paper...then I used a black sharpie to draw it on the board.

I used a design I found online, but you can find hundreds of awesome designs and transfer methods on Graphics Fairy!

After applying the transfer, I applied three coats of Watco butcher block oil on the board. Since I don't use (and don't recommend using!) the board for it's intended purpose, you could just spray the board with poly, but I like the natural and rich look of oil!

The next board is another little auction find...and old mahogany board that had been well used!

Stripping this board would not have removed all the cut marks so I took the sander to it...220 grit to get rid of the cut marks, then I finished it with 220. Super simple since mahogany is a relatively "soft" wood! I cleaned the little metal "stem" then I oiled the wood with butcher block oil (3 coats)...beautiful!

These little butcher block makeovers are simple and a great way to add a little "whimsy warmth" to any kitchen. Next time you spy one in a thrift store or at a garage sale, don't pass it up just because it looks a little warn and ratty! Take it home and spend just a few minutes bringing it back to life...you won't be disappointed!

Info

Comment

Traditional china vs. Ironstone....

I currently have 7 sets of china in my attic. The "important" pieces of each set are displayed throughout my home...tea sets, serving dishes, pitchers....as well as one place setting of all.

I did not set out to "collect" china. My first set was a pretty pink and green floral I purchased at an auction almost 30 years ago. The set had mint EVERYTHING...salt and pepper shakers, tea pot, sugar and cream set, serving dishes and 12 place settings.I proudly displayed it all in my china hutch until one fateful move...when I didn't get the little pegs securely in the top shelf of the china hutch...and it all came crashing down. No, it did not break the pieces I had 12 of, like plates and cups. Nope...the teapot, the sugar and cream set, the salt and pepper shakers, serving dishes. THOSE took the hit. By some weird alignment of the stars or fate, an older lady we were buying a house from was having an auction and she had the exact same set....including the serving pieces I had destroyed. Wow...what are the odds. Now most are packed away in the attic.

I bought another set of china years later, again at an auction.I loved the colors...browns, oranges, blues. It has the prettiest scalloped edges on the serving pieces! We used them at Thanksgiving for several years until we (I say we...actually Brian is the dishwasher!) got tired of having to hand wash them...now they are in the attic!

And then just a few years ago another set...a simple "white" with platinum edging, decorated with little platinum branches with birdies (if you remember, I have a thing for birdies!) Simple. I bought them for a New Year's dinner party. Much more "contemporary" than the other two sets. Naturally I used them once and then most were packed away in the attic.

Now the "family" heirlooms are starting to roll in. The first was from my paternal grandmother. She wasn't a "china kind of person" but she had the prettiest serving pieces of the Universal Ballerina in mist from the 1950s....a beautiful greenish-bluish color with a simple platinum edge. So pretty in fact that I began purchasing the dinner plates and bowls and cups. And then I promptly packed them away in the attic with the other sets.

Then my maternal grandmother's. Then both my maternal great grandmother's. All from Japan or Germany, where my mother's family lived during my grandfather's military career. I get tickled when people make a huge deal out of "Occupied Japan" pieces at auctions...I have an attic full because my grandparents actually lived in occupied Japan in the late 40s!

Again, I have the serving pieces, a place setting of each and the tea sets displayed but the rest are all packed and labeled in the attic.

So where does the ironstone come in?

Well, since the discovery of blog sites like Miss Mustard Seed and The Ironstone Nest I have taken a fancy to simplistic style of the white ironstone. So much so that when I discovered ONE ironstone bowl in an apartment, I went on an obsessive hunt for more pieces. For years I have loved white dishes because it was easy to add other white dishes when needed without there being a "glaring" difference! I ended up spending way more than I want to admit to put together 20 dinner plates, bowls and dessert plates for every day use, buying a few pieces at a time on Etsy and Ebay!

Ironstone is not as prevalent in our area as it is in other parts of the country. I have run across a few pieces here and there but nothing like the northeast where it seems to be in every antique and thrift store...and has soared in value. I have purchased a few pitchers and tureens and dish sets over the years (usually for VERY little), but nothing like what other bloggers report. It just hasn't made a "splash" here like it has elsewhere. The pieces I have sold have often sat for some time and sell for very little.

So I have begun to "hoard" what few pieces I stumble across.

Just last week I bought two pitchers (each thrown in a flat of odds and ends) at an auction.

I also picked up this pretty sugar and creamer set that came with an entire set of ironstone dinnerware. My daughter will get the dishes for her apartment this summer (that should tell you how little I paid for the entire set)...the sugar and creamer set are mine!

I found this little chipped creamer in a box of odds and ends several years ago and kept it because it was chipped and it is the perfect size for little knock-out roses.

I think I picked up this little set at another auction some time back. Pretty....

And this little pitcher...I like it with the little Gerber daisies in my laundry room!

Martha Stewart is credited for bringing ironstone to the fore-front of today's collectors. Her website gives the simplest, most comprehensive, history of ironstone. Well worth the read!

I really love the simplistic styling of the white ironstone. As much as I love and cherish all the pretty china I have purchased and inherited over the years, sometimes I feel like all the "traditional china" kind of gives my home that "old lady vibe." But most are heirloom pieces and are just a few of the Things I Love!

Info

Comment

Reupholstering the new living room chair...

I have said it before and I'll say it again...if you ever complain about the cost of reupholstering a piece of furniture, give it a shot!

Trust me, you will never complain again...and there is a good chance you will just buy new!

I spent over $200 just for the fabric for this chair!

It's not really "my style" but I wanted to use it to replace the big hulking brown leather chair in the living room and this one was a "freebie"...for obvious reasons. It had to be big enough for Cleo because that is "her chair."

Perfect fit.

And honestly, with a down cushion and deep seat, it is super comfy! Not that I would have sat in it before it was completely stripped and covered with new batting...but it LOOKED comfy!

There are THOUSANDS of tutorials on line for reupholstering just about any style of chair so I am not going to do a blow by blow tutorial on how I reupholstered this one. Your best bet is to find a tutorial for a chair similar to the one you are going to do. Besides, it took me a day to strip it and removed 2,453,692 staples, a day to sew the cushion cover and all the piping, and another day to upholster the main frame....my hands were in no shape to hold a camera!

My advice...buy a new chair! HOWEVER, if you insist on reupholstering a chair, find a good tutorial and settle in for some serious work!

I do love how this one turned out. I really want to infuse some "lighter-brighter" furniture so I went with the teal/cream print. I like the texture of the fabric and I think it will be very durable which is important since Cleo immediately reclaimed her spot!

Naturally the new chair means I will have to buy a new rug, but since Katie wants to take the existing rug to her new condo this summer, I have a valid excuse to buy a new one!

My next upholster project is this little MCM chair in my den....

Seriously, if I hadn't already purchased the fabric, I might have just said to heck with it and wait for the mauve and pale blue to come back in style. Or just buy a new one! But I adore this chair so when my hands regain their feeling, I'll move on to this project!

The weather has been pretty amazing so I have managed to finish up quite a few little projects, in spite of the fact I can barely grip a paintbrush, so I'll share a few in the coming weeks!

Info

2 Comments

Drop door cabinet makeover....

Enough about my entry makeover FOR NOW! I'll get there eventually but I'm at the "wait" and "hum" stage...waiting on tile and stair treads and not quite sure what I want to do about trim and lighting...hum....

So in the meantime I thought I would share one of the wash stands I rehabbed. I went to an awesome auction several weeks ago and brought home 5 potentially beautiful dressers and wash stands. One just needed to be cleaned and oiled but the others needed some serious work.

On these older pieces I just can't bring myself to slather them entirely in paint. I always have to restore a little bit of the original wood. I know in today's world of home decor, paint is all the rage, but I need a good balance of paint and the "warmth" of wood. So no matter the condition of the top, if it is solid wood, I am going to strip it and refinish it.

This little cabinet was originally a "wash stand." It wan't in terrible shape but it had seen better days!

It had a little mirror on the back, which when removed left a "gap" along the back edge.

If I was going to paint the top, I could have filled it in with a strip of poplar and been done with it. But I knew I wanted to refinish the top so I added a piece of oak...

...just routed the edge, then attached it with glue and trim nails. I stripped the top with this process, applied a little walnut stain and sealed with poly!

I chalk painted and distressed the base and sealed with poly. The little drop front REALLY distressed, but sometimes I just let furniture do what it wants to do! A little update on the hardware and it is good to go!

The drawers on most antique pieces have some issues....remember GLUE AND CLAMP when repairing drawers! Not nails and screws! And since the drawers were pretty ratty and stained, I gave them a little KSTP treatment! (sorry, no pictures!) They look and smell much better if you will take the time to paint the inside of the drawers of these older pieces!

I think this would make an awesome bedside table or entry piece! Or even a tv cabinet!

I tried to "stage" this little piece with some of my auction finds....

....an old cheese box, some awesome scales and a wood duck decoy. But again, I am not the best photographer and I am definitely more about doing and less "froo-frooing."

I have several dressers and another wash stand to share, so stay tuned!