TV cabinet makeover...

The bad news is I have had a lot of vacancies this past month...the good new is I have had a lot of vacancies this past month!

The reason it is bad is because it means I have pretty much had to bust it every day...cleaning, repairing, rehabbing! I. AM. EXHAUSTED!

The reason it is good news is because OCCASIONALLY I find a decent little piece I can work a little DIY magic on. Before I started "rehabbing for resell" I would either toss this stuff or give it away to friends and neighbors....often after spending days rehabbing and refinishing! Seriously, I just gave away stuff! Now I will make repairs, paint, refinish...whatever it takes to give the piece another lifetime of use!

This piece is a prime example...

Dated, worn and just down right ugly. Very similar in style to this piece but a little sturdier so I thought it was worth giving a little makeover!

This piece was a prime candidate for a little KSTP treatment I shared here.

It originally had a little shelf but it was missing so I cut another out of a sheet of plywood. Other than that, it really didn't need any repairs! I painted the cabinet a slate blue I mixed up using a blue and black latex paint I had on hand, painted the drawer fronts black and the hardware metallic gold.

I liked the style of the hardware but definitely not the color.

This is one of those pieces I took to "base neutral" (in other words, primed) and then let sit because I just couldn't decided what color to use on it.

Obviously the colors were okay...it sold 3 days after I took it to 410 Vintage.

Info

Comment

Simple makeovers for the worst offenders...the KSTP treatment!

There is NO excuse for ugly furniture. With warmer weather just around the corner, it is time to start looking at your furniture with a critical eye and making a list of pieces that CAN be changed with just a little bit of work!

We all have it...those "cheapo" pieces of furniture that are, at the very least, offensive! Maybe they were given to you, maybe you bought them at a "discount" store...maybe you bought it at the thrift store to fill space in a room.

Pressed board construction, laminate tops, dated finishes, pieces you put together with a little allen wrench thingy that came with the worthless little "screws" that promptly strip out and leave the piece wobbly and worthless!

It's ugly and cheap, but seriously who has the money to buy "real wood" furniture when you are struggling from pay check to pay check and having to buy shoes for a kid whose feet seem to grow a size every month.

I get it...I've been there. Fortunately I have learned to shop resale and auctions for "quality" pieces...and even if they need a little TLC, I have the tools, knowledge and time. But not everyone has that...or the money to buy and refinish high quality pieces.

That is why I advocate the KSTP treatment. Let me explain....

First, before you even get to the KSTP treatment, ALWAYS give the piece a good cleaning. On the nastiest, I use ammonia water but some can just be wiped down with a little water and mild detergent. Whatever you need to do to get the gunk off the piece! If it is "stuck" on just scrape it off with a razor! No matter if you scratch the finish...you are going to paint it!

Second, make any and all repairs that need to be made...and if you don't know how to repair it properly, google it!

Okay, now the KSTP treatment....

K- Kilz (my favorite primer but any QUALITY PRIMER will do! That is why this is the KSTP treatment and not the PSTP treatment!)

For smaller pieces I use a spray can only because it is easy and gives me a nice smooth finish. On larger pieces I use a brush and 4" foam roller! TIP! Always shake the can longer than the directions recommend. Kilz will spray on with a "grainy texture" if you don't shake the can well! No biggy since you are going to sand anyway, but just makes it a little easier! Also, pay attention to the temperature recommendations...it matters!

Many paints SAY they are a "primer and paint in one." Sorry, I am old school....I ALWAYS prime and I personally recommend it. If you want a superior finish that will hold up to use and abuse, prime!

S-Sand. A 220 grit paper will usually smooth out the piece after it is primed. I wrap a piece around a sanding sponge block!

If you have "ornate" legs or detailing, use 000-0000 steel wool.

USE YOUR HANDS, not your eyes. Feel the piece.

Trust me, if it isn't smooth, it WILL show after you paint it! Sand it until it is smooth to the touch! If you cleaned the piece well, scraped off all the gunk, this step really should only take a few minutes.

T- Tack cloth. A MUST after you sand but before you paint (or apply any finish). Blow or brush off as much as you can, then use a tack cloth!

You can purchase it at your favorite home improvement store...usually in packages of 2 and relatively inexpensive (around $2)! You can wipe a piece down all day with a clean cloth, but you WILL leave "stuff" on the piece if you don't tack cloth it. Tack cloth will remove EVERYTHING. If you still feel "stuff," hit it with the sand paper again and then tack cloth again!

P-Paint. This is where people usually freak out. My favorite for wood or laminate furniture is oil-based but it can be a tricky paint to work with for a novice and difficult to clean up. Fortunately latex paints have come a long way and are much more durable these days! QUALITY spray paint is probably your best bet for smaller pieces. I say quality because you can buy spray paint a tad cheaper at discount stores, but I am not a huge fan of cheap paint for ANY project! I usually buy Valspar or Rust-oleum from Lowe's.

On smaller pieces of furniture the difference will only be a few dollars but will be worth it in the long run.

Each of the brands come in LOTS of great colors...just find the color you love! I have found very little difference between the two brands...the Valspar tends to dry a tad quicker....but both are quality paints! ALWAYS shake the cans well and follow the directions on the can!!!

I have followed every tip in the book to get rid of the occasional "striping" on large, flat surfaces...like dresser tops or table tops. It doesn't seem to matter how I spray, what the temperature is or how hard the wind is blowing...sometimes I get stripes.

My solution has been to purchase the little "sample pots" of paint custom mixed to match the spray paint I am using and roll it on the large flat surfaces with a 4" foam roller!

Penetrol and Floetrol are a MUST any time you roll or brush on paint...oil or latex!

Use it. It will eliminate the brush and roller marks and give you a MUCH smoother finish!

These are just a VERY few projects using the KSTP treatment (I have done hundreds!)....world of difference for a little bit of work! I am working on a piece right now that is in the S stage...primed and sanded but now I need to figure out what color I want to paint it...soon!

Even light fixtures and paddle fans can be spray painted!!! On metal pieces and furniture hardware, I use metal primer primarily for the "rust retardant" factor!

One last important TIP when using ANY technique to paint anything....ALWAYS give the piece time to cure before you put it to work!

I was always skeptical of those "two day" makeovers they did on tv where they would paint something and then "stage" the pieces with all kinds of stuff within hours of putting a final coat on. (Kind of like getting your nails painted at the salon...even though you dry them for 10 minutes, you are still going to ding them if you dig in your purse for your keys! Unless you get gel polish...awesome stuff!) Trust me, that is the fasted way to ruin a finish! Don't do it...be patient and give the paint time to harden (cure) before you set a lamp on it or try to hang the fixture (trust me...I have had to repaint many pieces because of impatience!)

One dated, nasty, cheapo piece of furniture can ruin an entire room. Toss it or paint it! YOU CAN DO IT!

*I have not been compensated for pimping these products! These are the products I use and work for me!!!*

Info

Comment

Dining room table makeover and my recent angst!!!!

Choosing fabric for a piece for "resale" is a tad easier for me than when I have to make a decision for my own home! It is still a struggle, but not nearly as difficult as choosing a fabric for myself.

Primarily because I know how much work goes into reupholstering a piece and I know if I go too "trendy" I will end up having to redo it in a few years. It is one reason I "stay safe" with bigger pieces like couches and chairs...then I use throw pillows, blankets and rugs to pull in the "in" colors. Those things are easy to change...and I don't cringe too much if I have to donate a $15 pillow vs. a $2000 couch!

Example...I bought this ugly table and chair set at an auction....

In this condition, not appealing in the LEAST and not fit for any space...very dark and dated! But this is the kind of thing I know I can work a little "DIY magic" and make it perfect for another lifetime of use!

Not that I don't struggle with deciding paint colors and fabric for these pieces...this one sat for a while. I knew I would have to paint the top...it is laminate so it couldn't be "refinished." The legs on the table and the chairs are solid wood and in halfway decent shape but the vinyl brown seats had seen better days....that had to go!

I chalkpainted and distressed the table legs, primed and painted the top a flat black and painted the chairs a "steel blue." I found an awesome black/grey tweed upholstery fabric for the seats.

I saw several tables on Pinterest with this upholstery nailhead detailing and knew immediately I wanted to do it when I found the perfect table...and this table is perfect!

That little detail really makes all the difference, was relatively inexpensive (about .50 each!) and was not difficult. I just measured and marked where I wanted each nailhead to go, drilled a tiny hole, then hammered them into place! Cute as a bug's ear!

Obviously someone else thought it was cute as a bug's ear...it sold the day after we took it to 410 Vintage.

Which brings me to my recent angst! Chairs for my own home!!!

When I remodel my den last year, I knew I wanted to add a teal club chair. I bought this little MCM style chair a year ago and it has sat in my den since, waiting on time and inspiration! It is the perfect size and style for this space, but of course the upholstery is all wrong!

I finally went to the fabric store last week and pulled a bunch of fabric samples that caught my eye. I THINK I have decided I like this teal tweed fabric. This fabric works well with the style of the chair and is pretty much the color I was leaning towards.

I found this chair just last week and I THINK I want to use it to replace my big fat leather chair in the living room!

It is a tad more "traditional" than what I really like but that is okay...again, that is the great thing about having a mosh-pot of styles...or "eclectic" as they say!

One of the reasons I want to replace this chair is because it has become "the dog's chair." In other words, Cleo has claimed it as her own. She sleeps in it, sits in it and jumps on it when anyone comes to visit her (and EVERYONE is coming to visit HER!) As a result, it is in pretty bad shape.

So naturally, she has to check out the new chair to make sure it is comfortable FOR HER!

Not nearly as roomy as the leather chair, but she looks pretty comfy!

Again, fabric samples and nail biting choices....

I kinda sorta like the idea of doing a "two fabric" design. The grey geo on the sides and back, and the black for the cushion. But then again, I worry about being "trendy" with something that is going to require a lot of time and work, so I am leaning towards the simple, one fabric choice in blue.

What to do, what to do. For now I am taking my own advise. Looking to Pinterest and Google search for "inspiration." Looking for chair upholstery I LOVE that will work with this style and in my space!

It is the ONLY way I know how to make a decision and know it will be one I will be happy with for many years.

Info

Comment

Mid century chest makeover....

On rare occasions I find a little treasure hidden among all the garbage my tenants leave when they move in the middle of the night! I found this little table years ago and it started my love affair with Lane Acclaim tables....

It did NOT look like this! I remember I picked up the nasty little thing and started to toss it in the back of my truck. But it was sturdy and I could see quality through all the "muck" so I brought it home. I googled the markings on the underside and found that it is a walnut and oak Lane Acclaim table manufactured in 1959. With a lot of elbow grease and a little tung oil, it is now one of my favorite little "treasures." Along with the others I have purchased and restored over the years. Still waiting on the desk and a round end table...but someday...

Now I look at furniture I find a little closer.

This dresser is one of my recent finds. A true mid century piece. Completely intact and sturdy as the day it was built. Unfortunately someone had done a REALLY bad job painting it!

I cleaned it, primed it with Kilz, sanded it and wiped it down with tack cloth....then I painted it with one of my favorite flat "charcoal" greys. The ole' KSTP treatment! The drawers were in mint condition and just needed a little cleaning!

Beautiful! Because of the style, I kept the finish simple. While I hesitate to paint MCM pieces, this is a prime example of "enhancing" a piece.

Now I am going to share a little DIY frustration because I know I make this stuff LOOK easy sometimes. I first painted this entire piece with several cans of Valspar flat spray paint. I like spray paint because I normally get a nice smooth finish. For some reason I kept getting that "stripped" look on the top and sides...the drawers looked fine. Not a problem I normally have with flat finishes when the temperature is decent. I ended up buying a quart of latex flat paint, mixed to match, (and added floetrol...a must!) and used a 4" sponge roller to get a uniform finish. Worth the extra effort!

I know I have said it a thousand times....don't overlook those "ratty old" pieces.....neglected or abused or poorly "restored." With a little bit of your time and attention, they can be beautifully restored and ready for another lifetime of use!

This week I will be sharing this project at...

...love their features and their site!

Info

1 Comment

Updating a little chandelier...

I am almost embarrassed to admit where I got this ugly little brass chandelier....

Out of the back of a strangers pick up truck at the dump. Seriously...I was paying out at the local dump and this guy drove up in a truck loaded with trash. Sitting on top was this light fixture. So I asked him if I could have it...and he said SURE!

Geez...I have become one of "those" people who dig through other people's trash! Crazy cat lady, annoying coupon lady...and now this...(shaking head in disgust)

Whatever...I wasn't sure what exactly I was going to do with it but I knew it could be "updated" if I could just find the right inspiration. I knew I was going to paint the dated brass, so I decided to start there until I could figure out exactly what I wanted to do with the fixture!

Originally I primed it with metal primer, then started painting it with plain ole' off white spray paint. (Remember, when you aren't sure what to do with something, take it to "base neutral.")

And that is when a little DIY project turned into a total disaster. Yes, it happens. Even to me. Even though I shook the spray paint can per the instructions, it still started spraying all "clumpy." I don't know how to describe it, but rather than a nice smooth finish, it was all grainy and rough....AAAAGGGGGHHHHH!

Made me so mad I tossed the fixture in the back of the garage and said "SCREW IT." (Yes, I curse at innate objects!) I knew I was going to have to completely sand it down and considering the "ornateness" of it, I knew it would be a royal pain. My "vision" was just a heap of "mess."

Then I saw this on Pinterest...

Andrea at "Personally Andrea" took a plain ole' chandelier and dolled it up a bit by using jute twine to wrap the ugly little plastic tubes.

Hum....just the "inspiration" I needed to dig the "ruined" chandelier out of the back of the garage and give it another shot!

I sanded down the "grainy" finish, reprimed where needed and then painted it in my current favorite teal spray paint! (This time I shook the crud out of the can AND test sprayed it!)

Covering the ugly plastic tubes is super easy. Andrea used tape, but I used hot glue. I ran a little line of hot glue along the tube as I wrapped it in the jute twine.

WORD OF WARNING!!! Hot glue is HOT...and the plastic sleeves are a tad flimsy so use the glue sparingly or you will actually melt the little tube which will make it impossible to slip back onto the light. (Lesson learned the hard way...fortunately Lowe's sells replacement socket covers for under $3 a pair!)

I think painting the fixture in black or oil-rubbed bronze would have made it a little more "formal." But I was going for "fun" and "hip" and a little more casual!

I liked the look so well I decided to do the same to my dining room fixture using the plastic covers I purchased at Lowes!

I found some glittery gold fabric/paper kinda looking stuff at the craft store that I am going to use to cover new socket covers for the Christmas holiday! I will share that later when I do my Christmas decorating!

Don't turn your nose up at the dated brass fixtures...as I have shared many times fixtures, lamps and fans are super simple to update with a little paint.

And of course a little inspiration! Thanks Andrea!

Info

4 Comments

Sewing table....

I have shared this project before but with sewing and upholstery projects lined up on the dining room floor, it deserves another feature!

After a few weeks of working non-stop at the apartments, I finally have a little time to tackle the growing mountain of projects in my garage. Yesterday was spent prepping, priming and painting.

There has been a real "chance" of rain predicted for today all week and Mother Nature did not disappoint. Rain. Lots of it. So today, with the rain preventing me from getting out and finishing up those projects, I decided it was time to tackle one of my LEAST favorite aspect of DIY projecting!

Sewing...my nemesis! But it is an (evil) necessity if you are a DIYer! Just too many little projects require, at the very least, a straight stitch. The simplest upholstery projects, decorative pillows and curtains require the service of a sewing machine!

As I mentioned in this post, it is important that I have a way to store and use my little portable (and very old) sewing machine! Nothing fancy...pretty much does just the basics...straight stitch, zig-zag, button holes (which I NEVER use!)

This little portable table has been a life saver!

This was a little rusty typewriter table I bought at an auction...you can see how I dealt with the rust here and brought it back to life with a little TLC. I use to set my machine on my dining table, risking scratches and damage to the table and limiting where I could work on my sewing projects!

The portability of this table make it super easy to store it in the laundry room cubby!

As I have mentioned before, if you don't know how to sew, learn the basics! Take a class at your local hobby store or have a friend teach you! It isn't difficult and again, definitely necessary!

Info

1 Comment

Old shop cart transformation....

Sometimes you have to look really hard to see the treasure lurking beneath all the gunk and layers of paint.

This piece is a prime example....

I bought this old shop cart with metal castors at an auction several weeks ago. It was covered in decades of grease, grime and several layers of paint. My original plan was to clean it up and fix it up a bit to be used in a shop.

After a good scrubbing, I began stripping the top with my favorite finish stripper.... 1/2 acetone-1/2 lacquer thinner. My original intent was to completely strip the top and then apply a stain and poly.

After stripping off a majority of the top paint layers, I started sanding....and that is when I discovered that this table didn't want to be hidden away in an old shop...it wanted to be a beautiful butcher block island!

(I apologize for the pictures! I had fully intended to take it in the house and stage it all pretty...again, more doing, less froo-frooing! These were taken with my phone after I took it in to my booth!)

Even after stripping and sanding, the grain of the wood held onto an amazing "patina" that was so warm and beautiful I decided to leave it. I applied 3 coats of butcher block oil to hydrate and preserve the wood. No stain...this is just the natural color of the aged wood that was hiding under the layers of gunk and green paint!

I applied a chalk paint treatment on the base and distressed it a tad so the green "peaked" through a tiny bit. After painting and distressing, I sprayed it with poly. Again, poly tends to "yellow" a tad which gives the new paint an aged look, as well as seals! The inside of the drawer was pretty nasty, so I scrubbed it with ammonia and gave it a KSTP treatment!

This is not some fancy antique...just an old shop cart made out of pine. But it is absolutely beautiful and I think after years of being hidden away in a shop covered in gunk and grease, it deserved a little love! I honestly would have kept it if I had a place for it!

Again, don't turn your noise up on a piece that has years of neglect and abuse. Maybe, just maybe, there is a beautiful "soul" just waiting for you to reveal!

Info

4 Comments

Fun and quirky pumpkins and fall in the Ozarks!

The high Saturday was in the low 70s!!! Fall is in the air! But as always, the "early fall" was fleeting and this week we are back in the 80s. Cruuuuud!

I want desperately to break out all the fall decor but I will wait! I usually decorate right before we head out to Colorado...after a trip to the mountains and a week in the glorious Aspens, it will officially be fall in my mind...regardless of the temperatures!

I have been tweeking a few things in preparation for fall decorating. I picked up a few boxes of holiday knick-knacks at an auction a few weeks ago and found four really cute ceramic pumpkins and two wooden pumpkins.

As much as I love the fall colors, I decided I have WAAAAY too much orangey stuff so I decided to get a little creative with these.

Metallic gold? Hum...interesting.

Maybe white pumpkins?

Candy corn pumpkins? Kinda like these little jars I made a few years ago...super simple and a quick, quirky update to otherwise boring pumpkins!

Dunno...I have a few hundred pumpkins stored in the attic so I will see how these mesh when I finally drag it all down and start setting it up! The great thing about hitting the clearance sales after the season (besides the great savings) is all the wonderful surprises I find the next year!

A few years ago I shared a tutorial for making fall floral urns! Now is the time to get busy and make a few of these! This is the perfect way to use old pumpkins and garland you have grown tired of and no longer want to decorate with!

For me, decorating for fall is a two day process....seriously, I have THAT much! Insane!

Fall in the Arkansas Ozarks can be amazing! One of the greatest traditions in our area is the Fall Craft Fairs, anchored by the War Eagle Mill Craft fair! This year the fair will be October 15-18.

My advise for attending this event....go early to avoid traffic...wear comfortable walking shoes...come hungry (OMGosh the food is amazing!)...and make sure you clean out your trunk!

Not sure if you can even book a hotel in this area at this late date, but even if you hve to stay 1-2 hours away, it would be worth it.

War Eagle is not the only craft fair in the area...Northwest Arkansas will be covered with craft venues and the local papers will print maps of all the places where you can literally get lost ALL day just browsing and buying and filling your head with all kinds of inspiration for the holidays and home decorating.

Since I DIY almost everything, I rarely come home with a lot of "stuff" but I do come home with a head full of inspiration!

If you don't have anything planned for that week and want to take a little road trip with your girlfriends or family, I can promise you will have an amazing time! And maybe the trees will cooperate and you can see the glory of fall in the Ozarks!

Info

Comment

A marvelous mid century lamp!

Week three of waiting on the trim for the kitchen. Now I think I may just wait until I get the new doors with glass inserts installed before I do a full reveal...at the rate I am going with the trim, the doors will be here about the same time! Curses...

SOOOOO, in the meantime, I want to share a darling little lamp I picked up at an auction for next to nothing. I probably would have paid a little more for it since I knew the minute I saw it, I wanted it.

Why you ask? Let's be honest, it wasn't much to behold in it's "before" state. But what 50-60 year old piece ever really is! That is the great thing about learning to DIY anything...you can always take a $1 find and give it a good little makeover.

What drew me to this piece originally was the style. TOTALLY different than anything I had ever seen and definitely leaning towards the "mid century" style. My true love. I tried to find one similar...I Googled "mid century wood brass lamp"...."walnut brass lamp"..."atomic lamp." I found a few "similar" but nothing close enough to consider a hit.

Less the dreaded "oops," this little lamp didn't take a lot of work. I stripped the wood with the 1/2 acetone-1/2 lacquer thinner...that took all of about 5 minutes! I taped off the wood, cord and the sockets, gave the old copper base, finial and sockets a coat of metal primer, light sanding with steel wool, tack cloth, and a couple of coats of gold metallic spray paint! (The "oops" was my impatience which resulted in the need to completely strip the base and reprime and paint the entire thing!)

Did you know you can easily paint brass...yep...just prime it with metal primer and then paint it any color you want. Have an old brass lamp your mom gave you or you picked up at the thrift store. PAINT IT!!!!

I am slowly coming to terms with gold metallic accents and honestly, I'm kind of digging it! I even painted some ceramic pumpkins with gold metallic for my fall decor!

After the paint dried I applied a couple of coats of tung oil finish to the wood. New lamp shade from Hobby Lobby (40% off...yeah!!!!) and it is ready for another lifetime of use!!!

What is that blue "dish" you asked? I found it in one of the cabinets when I was purging my kitchen...a true gem! (My son would have been 12 when he made this!)

As I mentioned here, I think it is important to decorate with things you love and with things your children have created!

Fortunately, the wiring and sockets were in great shape, but seriously no biggy if an old lamp needs a little rewiring. Here I created a new light fixture out of industrial-type fans, but the general steps for rewiring a lamp would pretty much be the same!

If you are tired of your old boring lamp, paddle fan, or light fixture, check out these posts for just about any lighting project. Fairly simple projects that help you update ANY fixture or "lighten" a room without breaking the bank...because let's be honest...brand new lamps, light fixtures and paddle fans can be expensive.

Installing a new light fixture

New outdoor lighting

Painting designs on light or lamp shades

Painting light fixtures and paddle fans

Adding under counter lighting to the kitchen

Painting a brass lamp

Rewiring a fan or appliance

There are so many ways to change and update lighting! And super simple! Give it a shot...again, what's the worst that can happen. You still hate it and you still won't get more than a couple of bucks at a garage sale for it!

Also...a quick reminder! I have mentioned before that if you aren't sure what to do with something, take it down to "base neutral." In my case I have a garage full of projects I haven't decided what to do with yet. But I know one thing for certain...it all has to be repaired, primed and sanded. So yesterday, that is exactly what I did with a wood stool, 2 chests, 1 dresser, a ratan shelf, a few frame shelves and a set of ratan chairs. THIS is "base nuetral".....

Now that it is all prepped and ready for a new look, I am ready whenever the "creative bug" hits!!! If a piece of furniture has got a bad case of the "uglies" and you just don't know what to do with it, just remove the hardware, prime it, sand it, and eventually inspiration will come!

Info

2 Comments

Rewiring an old fan and my home's 15 seconds of fame....

The trim pieces for the kitchen still have not come in so as much as I would love the share my kitchen "reset" I am going to hold off until it is ALL done. I did share the construction and addition of the floating shelves last week, and you can check that out here.

This week I want to share an easy little project that I incorporated into my kitchen.

I have always wanted a fan in my kitchen...especially now that I am at the age when sudden bursts of "heat" wash over me (some call them hot flashes...but those are for old women!) A paddle fan isn't really a good idea in the kitchen, especially if you have a gas range like I do.

Over the years I have bought several "vintage" and "antique" fans at auctions. My favorite was a teal fan I had in my room for months...but as with a lot of things, it eventually went to the flea market and was sold...darn it! NOW I have the perfect place for it!

A month or so ago I picked up two antique fans at an auction...one a Westinghouse and the other an Emerson. I did a little research and found that both were from the 1930s. One had a decent, intact cord on it so I tested it and it worked beautifully after it was cleaned up and oiled. The other had a pretty ratty cord and there was NO WAY I was plugging that sucker in!

I took the working fan to my booth and kept the one that had the ratty cord. Since it had the "least value" and was a tad smaller and lighter, I decided to keep it and replace the cord!

The first thing I had to do was give it a good scrubbing. Most of the fans I have bought have been pretty nasty. Straight ammonia and steel wool! Not fun but necessary. Then I spritz all the insides with WD40.

Replacing the cord on any appliance, especially these old fans, is not difficult. If you can open it up and find the electrical connections, its pretty simple. These old fans have a few screws holding the baseplate onto the base of the fan...just remove the screws and remove the base plate.

Make sure you note where the old connections are....you want to make sure you hook up the new wiring properly. Occasionally, I will use painter's tape to actually "label" the posts or wiring so I don't forget...or better yet take a picture of it.

(Disclaimer...I actually used an old extension cord I had stripped to make sure the fan actually worked before I invested in a new cord! No sense in replacing the cord, only to discover that the fan motor wasn't working!)

Once I opened it up and got a look at the connections (and cleaned it up a bit...ewww), I purchased a new cord and electrical connectors at Lowe's.

The replacement cords have two bare wires on one end and a plug on the other. Just "crimp" the connectors on each wire and then attach the new wiring to the fan (or appliance) like the original wiring was connected. In my case, one wire went on one bolt and the other wire went on another bolt...then just tightened with a nut and washer...simple simon!

Then reassemble the fan. On this fan, it was just a matter of putting the base back on!

This fan is a little "vintagey" for my decor tastes, but I like that it adds just a touch of "eclectic" to this space. And as with everything, it will serve a great purpose when those heat waves hit!

COMMERCIAL SHOOT!

A few weeks ago, an old classmate of my son posted on Facebook that a producer he works for needed a fireplace to use in a photo shoot. Hey, I have TWO fireplaces...sweet!

I thought "photo shoot" meant they wanted to come take a few pictures. Um, no. Verge Videos is currently shooting a commercial for Dayspring Greeting Cards in my den. And since it is a Christmas commercial, we had to haul a bunch of Christmas decorations down out of the attic to "stage" the shots!

I know several bloggers who have had to decorate their house for Christmas in JUNE for magazine shoots! Pish-posh...not happening...and now it is!

Truth is, it is fun to watch all the work (and mess) that goes into making a simple little commercial! Lighting, props, hair and makeup...the whole shabang! Super cool process!