Little oak side table....

I am so bummed. I really wanted to share my little laundry room door project I mentioned last week. The only thing holding me up is the glass. I called and the glass came in, but it was wrong. DANG IT!!!

So today I am just going to share a simple little table.

One of the reasons I needed a flea market space was because I was always finding cool little pieces at my apartments. I would haul home a table or dresser or chair and give it a cute little make over...and then give it away!

I don't mind giving things away to friends and family...but after awhile I did have to come to terms with the fact that I was spending money (not to mention a lot of time) on these little makeovers...so the "rehab to resell" became a necessity. That, and I tend to haul home A LOT of little goodies from auctions and as I have said before, if I didn't have the flea market outlet (and wasn't a tad OCD) I could easily become a hoarder.

I love auctions...and I love restoring furniture. What can I say!

Anywho, I found this little solid oak table in an apartment. It was super sturdy and had already been stripped so it really just needed a little TLC.

I did scrub the top with my acetone/lacquer thinner mixture just to clean it up a bit. Then I stained the top with a walnut stain and applied 3 coats of tung oil finish. After that cured well, I taped and papered off the top and gave the bottom a KSTP treatment. (For those who are new, that is Kilz/sand/tack cloth/paint. I used my current favorite Valspar teal color.

New life for an old, abandoned table destined for the dumpster. Now it is a perfect little side table for the living room or even a bedside table.

Looking back at all the projects I have shared, it is easy to see that I still struggle with painting EVERYTHING....seems I almost always try to preserve a little "natural wood" if I can. Personally, I think the paint "updates" the piece and the stained wood gives it warmth. I am working on a desk and a fireplace surround right now and both have stained tops and painted bases....guess that's just my thang!

Hopefully the RIGHT glass will come in this week and I can share my door next week! I can't wait...it's going to be awesome!!!

In the meantime, pull your least favorite piece of furniture into the garage or yard and give it a little KSTP treatment...trust me...you're gonna love it!

Info

2 Comments

Bedside table makeover....

I spent several days this week projecting on a few pieces I picked up at auctions, as well as a little project here at the house.

I can't wait to share the home project...but I will have to. Even veteran DIYers flub every blue moon! In this case, I neglected to get a quote and delivery time frame on a "simple" piece of glass. Let's just say one should not fall in love with something if they have no idea how much it REALLY cost. I should know better...but by the time I called and got an estimate, it was too late. The vision was set and the damage was done!

I will have to wait until next week to share this AWESOME project....and in the meantime I will have to live with a big hole in my utility room door...stay tuned! (no it is not a doggy door!)

So this week I will share one of the little projects I managed to get done. I usually wait until I have 3-4 pieces to work on before I drag out the stripper and paint! Normally it is easier but it is just soooo hot! Working all day in the garage can really be draining!

Last week I bought these two little bedside tables at an auction.

Dark, dated and the drawers were a little wonky. But overall they were in pretty sound shape.

The drawers were an easy fix...the metal glides were a tad bent so I took a pair of pliers and straightened them out...perfect.

Usually I paint the tops of these pieces, but this time I decided to try stripping them...what harm could be done? Sure enough, the old poly finish just melted off (using this process!) leaving a beautiful wood veneer top perfect for a little walnut stain and tung oil finish.

I painted the existing brass hardware with a gold metallic paint. I gave the drawers a little KSTP treatment with a pretty "teal" spray paint, chalk painted the cabinets and distressed them a bit before sealing with a spray poly.

Cute as a bug's ear!!!!

These little tables fit perfectly in my commitment to stay "small." They still take a little time and energy, but they are MUCH easier to move around than the bigger pieces!

And this is just ANOTHER example of how you can take a dark, dated, wonky piece of furniture and give it new life!!!

Info

2 Comments

A few simple chair makeovers!

I usually have several chairs piled in my garage waiting on a makeover. The reason they get "piled" is because most require, at the very least, a smidge of sewing. My LEAST favorite thing to do! (Okay, root canals are pretty bad, but at least they give you drugs!) I usually wait until I have 2-3 projects that need sewing before I drag out the sewing table and get it all done at once!

Right now I still have two of the mid century dining chairs waiting to be refinished...no sewing needed, but they are small and tend to get pushed aside...time and again.

And honestly, I had intended to refinish these and keep them but that plan didn't work out so I refinished and sold two of them!

I have a mid century lounge chair I desperately want to refinish and reupholstery, but I bought it to keep so I have no doubt the selection of an appropriate upholstery will take months!

I did manage to get two chairs finished over the last few weeks.

The first is a simple little maple chair I picked up at Salvation Army.

A "tired and tattered" little thing to say the least.

I decided to go simple...a little chalk paint and distress on the frame (followed by a coat of poly to seal it) and drop cloth for the seat. This is the first time I have used gimp for trim, but it turned out nice. I just hot glued it over the gathered skirt.

I didn't even bother to make a back cushion...I like the look of the wood slats!

This cain chair was a tad more complex. Naturally I completely forgot to take a "before" picture until I had already started deconstructing it! But I have no doubt you have run across them in thrift stores and garage sales...a dime a dozen and pretty much what they are worth in their current state! The real gem is finding one with all the caning in tact!

I really was at a loss as to what to do with this chair...until my daughter suggested I do it in blue and gold! Actually, she suggested teal, but I found this blue and white material I really loved! She was right about the gold...it is all the "rage" right now and becoming very popular!

After removing the seat and all the upholstery, I primed the entire chair with Kilz, sanded and wiped it down with tack cloth. Then I sprayed it with white spray paint! After that had cured well, I taped off the legs and sprayed them with metallic gold spray paint. I wasn't sure whether I wanted to keep the tufting on the back but I sprayed the buttons and reused them. They didn't really turn out "gold" like I had hoped...more a "brownish" color, but honestly, close enough. I used metallic gold bias tape to make the piping and the double welting (Here is a tutorial on making piping out of bias tape!) A simple little process, but again, it does require hauling out the sewing machine (ick!)

Again, I could provide a step by step tutorial on "reupholstering" these simple little chairs, but there are dozens of tutorials on line (including video tutorials) that are ten times better than anything I can do. And every chair is different, so find a tutorial that makes sense to you AND has a chair similar to what you have! This is the very first chair I ever tackled. Knowing what I know now, I can do better. I can honestly say that I learn something new every time I tackle a project like this and regardless of the little imperfections here and there, they always end up WAY better than what I started with!

I tend to be a tad on the OCD side when it comes to projects...but I have learned that nothing is ever going to be perfect! And again, as my very wise Daddy use to say "You'll never notice it on a passing train!"

Which reminds me...Happy Father's Day Daddy! It has been twenty years (this month), but some days it seems like we just talked yesterday. I wish you were here to see all the things I have learned to do. All because you taught me that working with my hands (and my head) and making something out of nothing really can be rewarding! I know you would be proud! Thank you.... and I miss you!

Happy Father's Day to all the great men out there who are blessed with kiddos!!! Be the man you want your son to be and be the man you want your daughter to marry ;)

Info

2 Comments

Another mid-century dresser makeover...

If you have followed along for any amount of time, you know I have a "thing" for mid-century furniture...and walnut.

I just love the clean lines of the pieces and how sturdy they are. You can not buy furniture today that is as durable and sturdy as many of these 50-60 year old pieces. Well, I guess you can, but you will pay a pretty penny for them!

And walnut? Well, in my opinion, there isn't a more beautiful wood grain out there.

A few months ago I featured a beautiful mid-century dresser I refinished and put in "Mitchell's room." I knew it was a tad big for the room, but I just could not resist.

As strange luck would have it, I was cruising Craigslist and found the matching chest. It just so happens that the people who owned the flea market where I originally purchased the dresser were selling the matching chest. Wow. What are the odds!

I actually ended up paying a tad more for the chest than I did the dresser...and it was in a little rougher shape structurally.

One of the big "boo-boos" on this piece was some pretty substantial chipping on the veneer of the top drawer corners....

Several of the drawers had missing or broken bottom "glides" and one had been VERY poorly repaired! (Hence, THIS rant!) And one of the legs was a little whomper-jomped. (Technical term for loose and wobbly)

I can not stress enough how important it is to make proper repairs. People, wood glue and clamps are your friend! I could do a tutorial a day on properly repairing furniture, but truth be told, there are a billion outstanding tutorials online for every imaginable repair. No, DO NOT use nails to secure dislocated dove joints. No, do not use silicone to try to put a drawer back together. No, do not put sheetrock screws in the leg of a dresser that originally had a bolt and clamp. If you don't know how to properly fix it, GOOGLE IT! (or email me...I love telling people what to do!) Seriously, it isn't hard to repair furniture, but if you do it wrong, I promise it won't last...and all the paint and refinishing you did to make the piece "pretty" will be a waste of time!

So, the first thing I had to do was repair and rebuild a few drawer glides. Then I had to fix the leg which required removing the old bolt, filling the hole with wood and glue and then replacing the bolt. Then I had to figure out what to do with the chipped drawer fronts.

Since I had refinished the drawers on the dresser, I really wanted to refinish this piece to match. Since there is really no good way to "rebuild" veneer and then stain it to match, I decided to remove the damage by creating a little "radius" on the corners. Probably not the best thing to do on a style known for it's clean, straight lines. I contemplated just cutting the corners at a 45 degree angle...but naaaaaa.

My goal was to improve the aesthetics a tad and also prevent further damage to the veneer in the future.

I used a paint can to draw a "radius" on the corner....

...then I used my mouse sander with 220 grit paper to carefully sand away the damage and round the corners. This is what I call "sculpting" a piece and it takes time and patience. When sanding, always start with a very smooth grade of sand paper (220-330) and only use a rougher grit if it is absolutely necessary. And ALWAYS sand with the grain!

Other than the chipping, the veneer was in pretty go shape and still intact. If I had used a rougher grit, I risked chipping or damaging the veneer further.

When it was all said and done, it turned out pretty well.

After making all the repairs, I stripped the top, drawers and legs using 1/2 acetone and 1/2 lacquer thinner and steel wool. I knew I wanted to paint the "cabinet" like I did the dresser, so I taped and papered off everything that was going to be left "natural" and sprayed it will Kilz, sanded smooth, wiped it down with a tack cloth, and sprayed it with my favorite spray paint.

The top, drawer fronts and legs were left natural. I didn't apply a stain because I love the look and color of walnut with nothing but clear oil.

I used the same process I use on all stained or natural wood. First I hit it with 0000 steel wool (always WITH the grain) just to smooth it a bit. Then I applied 3-4 coats of Formby's tung oil finish, rubbing it with 0000 steel wool and a tack cloth between each coat.

In all honestly, I really do not need two large dressers in this room. It is just the "guest room" now. But I really can't part with either of these pieces! They are just too beautiful!

Don't turn your nose up at old pieces that need a little time and attention. In the end, if you do it right, they will be well worth it!

Info

8 Comments

Display hutch...before and after!

Brian has long since stopped questioning my purchases at auctions. I think he has developed a little bit of faith in my ability to make something out of nothing. But occasionally I do question myself. I must have subconscious flashes of inspiration that, in the stark light of day, are forgotten because occasionally I will look at a piece I brought home and think "WHAT WAS I THINKING!!!"

This would be one of those pieces....

It's not a horrible piece...it's just very "ho-hum." Not an antique or even remotely interesting. Just...well...boring.... for lack of a better word.

Basically just a "pine and particle board" piece that is pretty dated...seriously, hunter green?

The upside to this piece is it did not need any major repairs...just a few nuts and bolts tightened here and there. The stained top, shelves and crown where in good shape and didn't need to be refinished.

Honestly, it just needed a little "facelift." A brighter color to update it a bit! I taped and papered off the stained areas, removed the ugly wooden knobs and gave it a little KSTP treatment (Kilz, sand, tack cloth and paint!)

My favorite teal spray paint and simple little black knobs and we are good to go!!!

I even "displayed" a few of my auction finds just so the pictures would have a tiny bit more interest! This piece would be an awesome addition to a kid's room, an office, or even in a kitchen!

Again, this is one of those "boring" or "dated" pieces you probably have floating around your house. Whether it be bedroom furniture, a little table, an old dresser, or even a dated light fixture, a couple of hours and a few cans of spray paint can make all the difference. You don't have to be even remotely creative...just find your inspiration and go for it!!!

I have a garage full of projects I have been working on since the weather warmed a bit! I can't wait to share...something for everyone!

Info

7 Comments

Walnut MCM dresser makeover...Part 2!

You can see "Part 1" of this makeover here...a tutorial on stripping and oiling these amazing pieces!

Okay, I have to admit...EVERY time I work on one of these walnut pieces, two things happen...I fall madly in love with it and I am reminded of how much I LOVE walnut!

This little table is a prime example!

Solid walnut and an absolute true treasure! It certainly didn't LOOK like a treasure when I brought it home, but with a little time and effort, these pieces can become breathtaking additions to any home decor.

I know painted furniture is ALL the rage right now and I agree whole-heartedly that there is indeed a time and a place for painted furniture. My decorating motto...if you can ENHANCE the piece by painting it, go for it!

Some people aren't real keen on stained furniture...and that is okay. But I believe every decor needs the warmth and beauty of a quality natural wood piece...whether it is a table or chair or whatever! Not every piece needs to be painted and no decor should have ONLY painted furniture. Of course, no decor should have ONLY stained furniture either...even I throw in painted pieces here and there...probably not enough for some people's taste, but I do like to "lighten and brighten" occasionally. I painted my bedroom furniture and my office desk and even the little side table in my den. But you may note one common element on all these pieces...I left a little bit of natural wood! (Wow, looking at these old posts I realize my photography skills have come a long way! Still a ways to go, but definitely better!)

I decided to go with both paint and natural wood finish on this dresser. I like the way the painted "box" seems to frame the wood drawers! In my opinion, the results are A.M.A.Z.I.N.G!

So get ready for a BUNCH of pictures...because I am loving this piece!!!!

As I mention in the first post, the top had some pretty serious ink stains...

With a little "chemical" magic, gone!! When you find yourself faced with wood stains, hit the internet and search for a chemical solution. Trust me, sanding is NOT the answer, especially if you are working with veneer.

Can you even believe that this.....

...could become this. No stain...just a simple strip job and 4 coats of tung oil finish! Walnut in all it's natural glory!

I put this dresser in my oldest son's room. He doesn't actually LIVE here, but he still has a lot of stuff here. His room serves as a guest room and a place to keep all his "stuff." The other kids call it the "museum"...trophies, jerseys, plaques, certificates..high school and college mementos covering pretty much every square inch of the wall space.

Sooooo...it was time. Time for a fresh coat of paint. Time to box up most of the "stuff." Just time.

So later this week I will share his room makeover.

Want to know a little secret? For the first time ever I didn't stress over paint chips trying to pick the perfect paint color. I chose a color that everyone has been raving about on Pinterest and decor blogs. I literally called the paint store and told them to mix up 2 gallons, sight unseen...and I LOVE it!

I can't wait to share!

I am sharing this project with Christine at MustLoveHome.com as well as all my favorite Link Parties!

You can see the full room makeover here!

Info

10 Comments

Ugly laminate dresser before and after...

Like old maple furniture, they are a dime a dozen...old "laminate" furniture. The pieces aren't constructed near as sturdy as the old maple furniture (Here, here and here are a few maple pieces I have featured) but if you have a "boring" old laminate dresser sitting around or if you stumble across one at a thrift store or garage sale for next to nothing, it takes little time and effort to bring them back to life!

Like most of these pieces, the top and sides (basically the "box") were all laminate. The drawer fronts were wood veneer.

What is the difference you ask? Basically, laminate is a "plastic" type material over particle board...then a "grain" is printed on to give it a "wood look." Veneer is generally constructed of a real wood top layer glued onto a wood base. It is pretty easy to tell the difference...if it looks and feels like "plastic" it is probably a laminate...if it looks and feels like real wood (but it is not a solid piece of wood) it is probably a veneer.

The biggest difference for me when redoing one of these pieces is I always prime and paint the laminate...usually spray paint. I use a chalk paint treatment on the veneer because I can "distress" it and the "real" wood grain will peek through.

On this little dresser, both the laminate and veneer were in pretty good shape. Sometimes you will see "chipping" on either the veneer or the laminate. Both are relatively easy to repair. First, scrape away any loose pieces. Apply wood filler with a putty knife and then sand it smooth after it dries.

Since we are in the heart of "Razorback country" I decided to give it a black and red treatment. I thought it would look cute in a boy's room or maybe in someone's "man cave" as a tv console.

Again, super simple transformation. I removed all the drawers and then removed the hardware. Replacing hardware can get real expensive, real fast so I decided to give these little pulls a makeover as well. After I removed the pulls from the drawers, I put the screws back in them and stuck them in some old styrofoam (here is a picture example). I primed them with a metal primer and then I sprayed them with the same spray paint I used on the box.

I sprayed the "box" with Kilz, sanded, tacked and then gave it two coats of red spray paint. I painted the drawers with homemade black chalk paint (two coats) and then distressed them a bit. I sealed all the pieces, including the hardware, with clear spray on poly.

If you have an old dresser like this and need inspiration for color or styling, check out Pinterest. There are sooo many inspiration pieces. Some even remove a few of the drawers and add a shelf in the space so it can be used as an entertainment center for a tv and video equipment. I have done that with an old maple dresser and it turned out super cute and perfect for a living room.

I had the chest that matched this dresser...I painted the "box" off-white and the drawer fronts a pretty tealy blue. I redid it months ago and it is long gone! This poor little guy has languished in my garage for months and was one of the many projects I managed to get completed this week during our little warm spell...along with cleaning out the pond (AGAIN!) and washing exterior windows!

Good thing I got a lot done the last few days because today it feels more like winter again.

Info

2 Comments

Simple piano bench makeover.....

This will be my last post until after the New Year. Just too many things going on between now and then...Christmas with the family and all the craziness that entails...falling asleep before midnight on the New Year's Eve...and of course the cold weather that makes it a little difficult to do too much outside!

My family will be arriving Christmas eve. Sarah and her family...the boys driving in from Phoenix! Before then, I have several days of baking and house cleaning to do! Lots of fun and excitement. I also have a few new "things" happening after the New Year that I will share in due time.

So many wonderful changes going on around here!

So...the last project of 2014 is a simple little project that anyone over the age of 40 will appreciate!

In the warmer months I pretty much live in flip-flops! This is the time of the year when I wear my boots almost every day and the older I get the harder it is to get those suckers on. I use to be able to steadily stand on one foot while I put on my shoes or boots...these days I tend to tip over. Not sure if it is the age or the weight...lol! And naturally there is the potential to be bowled over by a spastic dog or terrorized cat!

I have the little ottoman by the chair in that room, but it is a tad low....

...God forbid I move the ottoman and sit in the chair!

When I found this little piano bench at an auction, I immediately knew it was the perfect size to set next to the closet so I would have a place to sit and put on my shoes.

I have reupholstered and refinished several little benches over the last year...naturally when I went looking for pictures I found I had a lot of "before" pictures and a few "after" pictures but never both of one bench...seriously, what is up with that!

This bench was in obvious need of a little "makeover." The top was in pretty rough shape but it was walnut veneer and the legs were pretty much mint after a little cleaning. Structurally it was sound and solid.

I decided to strip and oil the top and paint the legs!

First, I removed the top. I used the acetone/lacquer thinner mixture to quickly strip all the old varnish off the top. Took all of about 15 minutes. Then I applied 4 coats of tung oil, rubbing with steel wool and wiping with a tack cloth between each coat!

I sprayed the legs with Kilz and after it dried I gave it a quick sanding and wiped it down with a tack cloth. Then I sprayed it with 2 coats of my favorite off-white spray paint.

Cute as a bugs ear!

It is the perfect height for sitting to put your shoes on and since it is a piano bench, the top lifts up for storage...perfect for boot brushes and cleaners! (Like I ever do that...that is what my OCD son is for) I didn't refinish or paint the inside...why bother!

I have run across several old piano and sewing benches over the years. Sometimes I paint the tops or add upholstered cushions. The larger benches are perfect for the foot of the bed. Simple and perfect for storage for an extra blanket or shoe cleaning supplies.

Next time you run across an old beat up bench, use your imagination! This little makeover took less than one hour of actual "work." Trust me...when you hit forty, you will be glad you have someplace to sit while you put on your shoes!

I hope you all have a VERY MERRY CHRISTMAS and may the New Year bring you happiness, health and wisdom! Trust me, if you have that, you have all the wealth you will ever need!

Goodbye 2014...thank you for the great times and the lessons I learned during the hard times.

Info

2 Comments

Christmas pillows....

One of the great things about the "blogoshere" is all the great inspiration AND motivation!

This past week I was reading one of my favorite blogs, "The Interior Frugalista", and Marie was sharing her snowflake decorative pillows...only she calls them "toss cushions." Gotta love those Canadians...lol!

Anywho, it not only inspired me, it motivated me to do something I seriously dislike doing...sew!

I have been scavenging down pillow forms. I wanted down forms for the decorative pillows that have poly-fill and a few extras for some holiday pillows!

As I mentioned before I like down forms because they are more comfortable and have a "designer" look! To me they just look "rich" but their price tag can reflect that and it is difficult for me to fork over twenty bucks for something I am going to have to make a cover for and something that is nothing more than a "doo-dad."

This past week I found 6 awesome down pillow forms, in varying sizes, ALL for under $7...a few for as cheap as $5. Thrift stores and flea markets. Yep...I am buying ugly old designer pillows, removing the cover and sanitizing the forms for reuse! (just toss them in a hot dryer with a dryer sheet!)

Since I had all these forms piled up, I knew it was time to drag out the old sewing cart and get busy!

TIP: If you have a 18 x 18 pillow form, you may be tempted to cut your cover fabric 19 x 19 to allow for the seams. DON'T. Cut the fabric 18 x 18...your cover will be about 1" smaller than the actual pillow form, but that is what will make them look super "puffy" and "full." I read that once on a designer website (no source, just info stored in the back of my brain!) and I tried it...makes a huge difference!

I have shared "pillow tutorials" on several posts in the past (you will note I advocated cutting your cover fabric larger back then...again, don't)...you can check them out here, here, here, and here.

There is no sense in rehashing the "how to." I've provided a tutorial and there are "how to" tutorials all over the internet. Marie does a great job of "tutorialing." (As I have said before, if you can sew a straight stitch, you can sew a decorative pillow...if you can't, now is the time to learn.)

So I am going to share just to provide inspiration AND motivation and give you a few little tips on where you can find material to make inexpensive holiday covers.

My first "inspiration" came from a Pottery Barn knock-off I found on Pinterest....

This little pillow was super simple to make. I used two pillow shams that came with a white bedspread I ordered to put over my down comforter for the winter. I was never going to use them on the bed, so I decided to use the fabric for my decorative pillows. I didn't have enough for the back, so I used the leftover fabric from the tea towel pillows I will share in a bit....

As you can see, I changed things up from the "inspiration" pillow. I used green sparkly felt and rhinestones...both of which you can buy at your local craft store. I cut a bunch of "leaves" from the green felt, and used a bowl to guestimate a circle...

Then it was just a matter of filling in the "wreath" and placing a few rhinestones here and there...basically, I eyeballed it! I used fabric glue on the green leaves and "Jewel It" glue on the rhinestones and let it sit overnight before I constructed the pillow. I used a "premade" silver bias tape for the piping!

I made this pillow out of tea towels I picked up at Hobby Lobby...

....they were around $4.50 (50% off!) for two!

One set of towels made TWO pillow covers and I used the leftover fabric for the backs of the wreath pillow! I spruced it up a bit by placing a rhinestone in the middle of each of the snowflakes and added a little piping around the edge. The piping is made out of bias tape and you can find a tutorial here on how to make inexpensive decorative piping from bias tape!

I made two pillows with this snowflake cutout table runner and a white table cloth I bought at TJ Maxx. (I would not suggest using inexpensive tablecloths for pillow projects...just seems too "thin" and tends to ravel quite a bit. Lesson learned.)

I centered the runner on the piece of fabric I cut out for the front of the pillow and basted the top and bottom to it with my machine to keep it in place. After I basted it, I used the fabric glue around the edges of the cutout to keep it "flat."

Again, I glued a rhinestone in the middle of each snowflake. I just love "sparkle!"

After making two white snowflake pillows, I had enough of the snowflake cutout to make one more pillow. I picked up a "burnt red" pillow and I kind of liked the color so I deconstructed it, made it a tad smaller so the pillow would be fuller and added the white snowflake cutout material.

I only have one, but I think it will look great in the den where I have more "fall" colors year round!

I also put zippers on all these pillow covers so I can easily remove them and reuse the forms!

I tend to be an "OCD/symmetry" kinda person so I made two of each of the decorative pillows so I will have one for each end of the couch when it is time to decorate for Christmas.

All these pillows are 18 x 18 and honestly, I don't like the three lined up together. I found two smaller pillow forms and plan on making Christmas covers for them and using one with two of the 18" pillows on each end of the sofa...maybe...someday...IF I get a little more motivation in the future!

While I was making a mess, I decided to make another "floor pillow" for the den. I had two large poly-fill forms (actually they were Euro-pillows with ugly covers!) I bought at an estate sale and I thought they would be perfect to toss around on the den floor for tv watching! I had already made one large toss pillow and two smaller decorative pillows out of some leftover fabric from my dining chair project.

I used the drop cloth material leftover from this chair project and an iron on graphic from The Graphic Fairy. Since the pillow was fairly large, I decided I wanted the graphic to be bigger so I pulled it up in Adobe Photoshop, enlarged it and then printed it out on four sheets of iron-on transfer paper. Then it was just a matter of piecing the graphic together and ironing it on the fabric. There was a little "line" where two of the pages didn't quite fit together perfectly...I used a Sharpie to fill it in a tad.

I removed the "Grain" wording on banner in Photoshop and had intended to replace it with "Love Life." But I had a few issues with my printer so I ran out of transfer paper. Since I put zippers on all my pillow covers, I will just remove the cover and iron on the new words when my order of paper comes in.

I still haven't shared my fall decor. Truthfully, it hasn't changed a whole lot from last year. But I have a few little additions and I thought it would be fun to do an entire post about the fall decor and update my Holiday Decor pictures. After all, Thanksgiving is less than three weeks away and the day after Thanksgiving, it all goes back in the attic! If you see anything that "inspires" you, it will be the PERFECT time to snag fall decor for pennies on the dollar!!! You may have to wait til next year to use it, but it is always fun to find things you forgot you bought last year!

So this week...I promise!

Info

6 Comments

Finding inspiration for a ladder shelf!!! And my master bedroom update!

One of the awesome things about the "blogisphere" is all the great inspiration and instruction you can find for just about anything you want to do!

A few weeks ago, my inspiration came from Kristi at "Making it in the Mountains." She built a ladder shelf for her back deck and it is awesome!!!

Someday I plan on making one exactly like this! I bought a few ladder shelves at an auction recently and when I priced them to see how much I should sell them for they were going for around $150! Craziness! And they aren't even fit for outdoor use like Kristi's!

Anywho, MONTHS ago I ended up with a beat up old desk from an auction...the auctioneers know us now so when no one bid on the poor old thing, he pointed at me and asked if I would pay a dollar...whatever...I figured I could do something with it. Heck, the awesome hardware is worth a buck!

I originally planned on restoring it but truth be told, it was pretty rough and I have learned that "rehabbing" these old desks really isn't worth the time and effort for resell. The top was laminate and the drawers were veneered. The only good solid wood was the leg and it was hanging on by a few flimsy nails!

But the drawers were well constructed...and the veneer was easily "patched."

So I decided to use the drawers and make a "modified" version of the ladder shelf...a drawer shelf!

I think it could be used as a storage shelf in a bathroom or laundry room...maybe toy storage in a kid's room! It's pretty sturdy so it can hold a lot of "stuff."

I painted the drawers with the "frosted berry" paint I bought for my room. Not that I think it NEEDED to be that color, but I have the paint and I like it! Rather than use the awesome hardware (I am hoarding those for a special project) or fill in the holes, I used rope on the two bottom drawers and a plain white knob on the top! It doesn't NEED pulls, but I want it to look like what it is...drawers!

I cut the top drawer down....I contemplated cutting the middle drawer down as well...no reason why I didn't...I just didn't!

Thanks for the inspiration Kristi!!!

(BTW, it sold within hours of putting it in my booth! Wow!)

MASTER BEDROOM PROGRESS!

As I mentioned in this earlier post, I finally broke down and bought the laminate I want for my master bedroom! Lumber Liquidators had a deal I just could not pass up! Fortunately, it will take two weeks to get it.

"Back in the day" that would frustrate me. There was a time when I could pull the trim, remove the old flooring, lay the laminate, reinstall the trim and paint...all in ONE day...or at least a weekend. Now...not so much. I have been pulling carpet and glue-down hardwood for over a week! My back ache and sore legs make living in this disaster of destruction somewhat tolerable!

Please note that even when my room is in complete disarray, I still make my bed every day! I am thoroughly convinced that the first day I don't make my bed will be the day I die...it's a "thing" I have. (discussed in detail here)

I had to remove the base of the fireplace surround to remove the flooring. I stupidly laid the floor THEN built the fireplace surround...I know better than that. This is a prime example of WHY it is a problem to set cabinets and fireplace trim on top of flooring!!!! Chances are you will replace the flooring long before you replace cabinets or fireplace surrounds...and removing the old flooring will be very difficult if it is under the cabinets or surround!

I did find one neat thing...I guess when I built this room I painted "I "heart" you" on the floor. How sweet!

There is a downside to DIY projecting! The mess! But I have wanted new flooring for YEARS so it will be worth it!

I decided to reuse the existing trim and set it on top of the new flooring...so I have to pull all the trim, remove the nails and scrape off the old caulk.

I also decided to do the floors in the office...but right now I am only going to do the main bedroom and get it back in order before I tackle the office. The office is ALL glue-down hardwood and it will be a booger to get it all up! I played with gel staining the existing hardwood...and it would have worked had I stained it all at once rather than doing a big "test splotch." Unfortunately, you can see the "lap over" of the stain and it looks horrid. So it all comes up and new flooring goes down!

I am hiring my neighbor to remove all the old flooring in the office...it is a small room but after a week of working on the master bedroom and what I know will be a labor intensive 2-3 days of installing the new flooring, I am finally having to admit I am too fricking old to "do it all."

Curses.

Info

9 Comments