How to paint your front door properly...

I have been super busy with things other than DIY projects. But one project I did manage to do this past week was repaint my front door…just a quick little one coat “refresher.”

My tutorial for painting an exterior door gets a lot of traffic so I though I would link back to that post just in case you need a little help.

I also painted house numbers on the door and I shared that tutorial HERE.

Remember, not everyone will see you newly remodeled bathroom or organized linen closet…but almost every guest will see your front door…keep it nice!!!

This is just one of the little projects I managed to get worked in this past week in the midst of some “big stuff” that I will share when I can.

In the meantime, I may be linking back to some little projects ANYONE can do! So if you are new around here you might want to stay tuned for some basic tutorials!

Info

Comment

Guest room decor and a little history.....

Last fall I shared a little “makeover” of the frames of these portraits of my great-great-great and my great-great grandmother. They hung in the guest room above the bed…

I never really LOVED these portraits and my daughter swears they gave her nightmares when she came to visit. I have to admit, they are a tad on the “ghoulish” side even with lighter and brighter frames.

Before I reveal the changes I made, I have to share this “small world” story!

A friend of mine tagged a friend of his on Facebook on an article about a house his friend owns…a house he now runs as a B&B in Arkansas City, Arkansas.

The minute I saw it, I knew it was the house my great-great grandparents (Hubert and Ionia Furr) built in 1910…the house my great grandmother grew up in and my grandmother was born in! (My great great grandmother is the portrait on the right, her mother on the left!)

I immediately contacted the owner…he had very little history on the house other than what was written up in the National Register bio. I, being the keeper of the family photos and documents, have sooooo much more!

Poor guy…I flooded his email with pictures of my great great grandparents, the house and all the documents I could find.

I think one of the neatest things I have is a picture of the house while it was being constructed…

I won’t bore you with all the pictures and documents I have about this home and my ancestors and the little town in southeast Arkansas.

But this house and the people who resided there have a tremendous amount of history.

It is the house where my ancestors lived during the 1918 pandemic. A flu pandemic that killed almost 700,000 in the United States and 50 MILLION world wide.

The house also survived the great flood of 1927 that wiped out most of the town and actually changed the course of the Mississippi River.

While I was digging through all the family documents looking for more information on the house to share, I ran across this letter…written by my great-great grandmother during the flood of 1927 to my great-grandmother….

I won’t post pictures of the entire letter, but this is the transcript…

Arkansas City, Sat ? (postmarked May 3, 1927)

Dear children-

Am going to make this do for both you girls. Haven’t heard from you in more than 2 weeks and twill be 2 weeks Tues. since we have had a newspaper. Everything is closed here on account of water-we have 85 inches inside the house only 5 steps of the stairway being visible. You can imagine my state of mind as the South Bend break will give us more water by tomorrow I suppose. We go in and out of the house through the middle bedroom window in your old bedroom. I step off the roof onto a floating dock where I keep the chickens. Only lost two by drowning.

Water came in town last Sunday 2:30 and was 2 ft deep in 20 minutes. I waded above my knees getting up the hens and by dark it was in the house. It has been raining ever since til today when it has fallen ½ in. to get ready for the next rise. The wood shed and garage bucked up and Daddy has wired them to keep them from floating off in a storm. The teacherage is entirely under water and lots of other houses.

The town is simply ruined. An airplane takes the mail and your telegraphs were sent by radio by way of Memphis and so had to be sent collect.

I am so worried because we can’t send Gladys’s board money and do hope the matron will wait on her or that you will take her to your house for this last month. We have no way to get the money tho the levee board owes Daddy $125 or $150 which will be paid when this strain is over. The youngsters run bateaux on the bank porch so of course the bank is closed for the time. Please help us out in this pinch and we will make it up to you some way. I do hope the next rise will not be much for 2 ft. will ruin the ceiling.

The Matthews are upstairs in 2 small rooms. 2 of the boys sleep over here and they seem to be having a good time. Of course all my flowers are done for the crude oil is killing the vine on the house. Most every one lost their chickens. Lawrence Demarke (?) must have lost over 1000 also Emmat Furlong. The water came too fast to let them be picked up.

I suppose all Watson is nearly washed away. Mr. Kemp’s house disappeared as did everybody elses. The little Dollar house is on the Pike if it hasn’t fallen to pieces.

The break at Scott Miss. Saved us from the Miss. R. as we would have broken either at Chicot or Fulton inside of 3 or 4 hours. The river fell here nearly 2 ft. the first day and is much lower now than it is on the inside of the levee. Several hundred tents are on the levee and it is a queer sight. The govt is feeding them and the negros seem so happy.

We will have no more school this term. The girls left for Memphis and I guess they finally got to Conway. Betsye is at the hotel tho’ Daddy and I both invited her to stay with us. Bro. Still’s furniture is in the water upon a scaffold not high enough. All Mrs. Cunningham’s furniture and best clothes are in her house with the water up to the roof. I left most of my dishes downstairs so I guess they will be lost.

Well I hope you girls and your girls also Bill are well and happy. Want to hear from you soon and find how Gladys arranges for her board. Daddy is well and busy helping the distressed.

Granny Muff died this afternoon in a box car. Will be buried on the mound.

Love to you all and if we are washed away dispose of the remains as you please, Mother

I share all this for one reason.

To remind you…our country and our ancestors have survived pandemics and floods and wars.

Like our ancestors we too will survive…and we will thrive. We just have to stay positive and focused on our future! In 100 years our great great grand children will be sharing stories of our strength and endurance during difficult times….we are living proof!

So now the changes…heirlooms in their own right and a bit more cheerful.

These prints are from Hawaii and Bermuda…my parents traveled there in the 80s and these have been in my mother’s home for 30+ years. She is in the process of distributing a few things in her house so I took them and reframed them and decide they would be perfect in the guest room!

They are a tad off-center so at some point I probably need to rehang them. Someday…nice thing about this room, I literally only go in it a handful of times a year, before and after guests. Unlike wall decor in my living room or bedroom, this isn’t going to keep me up nights…lol!

Maybe I can find a narrow something-or-another to hang on the left to balance it out.

Not sure what I will do with the ancestral portraits…but I will find some where perfect for them…eventually.

Info

1 Comment

How to set stone in your lawn...

My first love is flagstone…I share HERE how I created a little flagstone patio in the front of the house…

This was a massive project and required “excavating” a large area.

My project this week is the same process but “small scale.”

My mother offered my Granddad’s grindstones that my dad had set in their yard as a pathway.

There are a few things I have that make me see “old ladyish”…my grandmother’s china and hutch, an old camera collection, a few knick knacks here and there…and certainly a grindstone pathway in the yard would qualify. Truth be told, I can not pass up anything that is a family heirloom.

If you don’t know what a grindstone is, google it.

Nifty stones that were originally used to sharpen tools. I have no idea if my grandfather actually used them for their intended purpose but I believe they were set in his yard as stepping stones…and my dad got them and did the same.

So now I have moved them to my house…and this past weekend I set them in the yard.

I had already set a few of them when I realized it would be a great way to show you how I create a path set in the ground…no worries about having to mow around it.

Whether you use grindstones, slabs of wood, bricks or flagstone…this is the way to property set them individually to create a “stepping path.” I have found that this method creates the least destruction to existing turf. You can even do it before you seed or lay sod.

The first thing you want to do is lay them out where you want them.

Look at them from every angle…maybe walk on them to see if they “step right.”

Once you have them laid out where you want them, it is time to get down to the REAL work. (I will refer to “stone” because that is what I used…again, you can create a path with just about any durable material!)

First, take a shovel and go around the stone… about 1'“-2” from the edge of the stone…keep the shovel straight and go into the ground at least 4”. (My stones were about 2” thick and I want at least a 2” bed of sand and soil to set the stone on.) You are basically using the stone as a template.

Once you have gone around the entire stone, just flip it out of the way for the time being.

Since my yard was sodded, I wanted to salvage the sod and use it to fill in a few bare spots here and there…so I used my shovel to carefully remove the sod…

I used a little hand rake to remove the bulk of the dirt off the piece of sod and relocated it to the bare spots.

Then I used the shovel and my hands to remove all the excess dirt in the hole. I put it in a bucket and used it in an area of the yard that need a little fill.

I made the hole about 4” deep, then I added sand.

You can buy bags of “play sand” or even “paver base.” Just make sure you put some kind of sand or base in the hole to create a stable, level bed free of rocks and debris. .

I would suggest hosing down the sand just to make sure it is packed well…your goal here is to create a level, compact bed for the stone to set on.

Once the sand is leveled, replace the stone and make any adjustment by lifting and filling where needed.

I used the dirt I removed from the hole to fill in around the stone.

Once all the stones were set, I saturated them…this forces the dirt around the stones to seep under the stones and also lets you see which ones may need to be lifted and additional sand toss under.

Step on them and make sure they seem “firm.” I had one that “rocked” so I lifted it and added sand. As the dirt around the stones seeped underneath I added more and plugged in a few pieces of sod.

With a little water and sun I expect the grass to fill back in nicely over the next few weeks!

(You can see HERE how I dolled up the storage shed a bit!)

I saved a little dirt in the bucket because I know some of the soil around the stone may compact a bit. Also, this part of my yard is fescue so I may have to over-seed a bit…but that is okay! I like the look and even though it may be a little “old ladyish” I have a walking path that has a little bit of sentimental value.

Perfect!

Info

4 Comments

How to build a shop or garden cart...

I’m kinda bad at posting “tutorials.” There are SOOO many tutorials online for just about anything you want to do and my motto is to FIND THE ONE THAT MAKES THE MOST SENSE FOR YOU!!!!

That being said, I am going to TRY to post a tutorial for building a cart…for either your “shop” or maybe a deck or garden cart…or even a little portable kitchen island.

I shared here how I took an old shop cart I bought at an auction and cleaned it up for use as a kitchen island.

The function will dictate the materials you will want to use. If it is something that will be outdoors, you want to use pressure treated wood or even cedar. If it is something that will be in your garage or “shop” you can use plain ole’ pine…if you want something a little fancier, like maybe a kitchen island, you want to find some nicer wood that can be stained and oiled and used in food prep.

In this case, my daughter Katie, wanted something she could put her chop saw and tools on and roll in and out of the house. Kind of like my old shop cart….

…another auction find that I fixed up a tad to use in my garage. It holds my chop saw so when I need to use it I can just wheel it outside so sawdust doesn’t get all over the garage. And the bottom shelf holds many of my tools! Not pretty but super functional!

Since her cart won’t be stored outside, I decided to build the bulk of her cart out of pine 2 x 4s. The tops are 1 x 6 treated decking, but only because it is the perfect sizing…not because I necessarily needed the pressure treated wood.

So my shop cart is my “inspiration.”

The next thing I did was “make a plan.”

Again, whether you are building something simple, refinishing a dresser, or giving a room a makeover, you have to first find your inspiration, then make a plan.

In this case, “the plan” is a simple little drawing with dimensions and a material list.

Originally the plan was based on my cart dimensions…but Katie decided she wanted her’s a tad smaller, 20 x 30, so that altered the dimensions and materials just a tad. I ended up using only 1 of the 2x4x10s and 3 of the 1x6x8s.

Important reminder: a 2 x 4 is actually only 1 1/2 x 3 1/2…2x6 material is actually only 1 1/2 x 5 1/2….only the length is actual. This is important when designing any build so make sure you know what the actual dimensions are of any wood you buy. This chart can be super helpful….

Softwood Dimensional Lumber Actual Sizes.jpg

I could have bought 4x4 material to make the “legs” but decided to just “stack” two 2x4s…personal preference. If you decided to use 4x4 material, skip this step and buy 2- 4x4x6 posts and cut them down to 31” each.

The legs will be 31” because I wanted the height of the finished cart to be around 35”. The wheels I used are 3” high and the top is 1” thick.

Again, I used 2 x4s to construct the legs….

I cut 8 pieces 31”, glued (SUPER important to glue ALL joints)….

….stacked, nailed with my new Mother’s Day gift (LOVE!)….

…then screwed them together with 2 1/2” screws.

I nailed them first just to hold them in place…then I added screws.

After each leg was built, I attached the wheels to one end of each using 2” screws!

Next I built the top and shelf “frames.” Since Katie wanted it to be 20” x 30”, I cut 4 boards 29” (the face) and four boards 16”….the 16” boards are the sides. (1 1/2” thickness of each of the face boards = 3”…basically a 19x29 frame allowing 1/2” for overhang on the top)

I used my kreg jig to construct the tops….

…if you don’t have a Kreg jig, get one! Or you can just glue and screw the top together.

Then it was time to attach the frames to the legs.

I used screws and glue to attach them and since I wanted the screw holes on the front to be a tad fancier, I used my little “hide the screw” trick.

In this case I used 3/8” wood plugs to cover each screw hole…first I drilled a hole with a 3/8” bit about 1/4” deep, then I used a 1/16” bit to finish drilling all the way through the board.

TIP: Predrilling holes will keep the wood from splitting when you use screws!

I attached the legs to the frames using 3” screws through the “predrilled” holes and glue (GLUE IS IMPORTANT! USE IT!)

On the sides, I just used screws…no fancy holes or plugs!

I added the little plugs…just a dab of glue in the little holds, then popped them in…super simple but a nice detail!

After the frame is constructed it is just a matter of adding the tops…again, I used 1 x 6 pressure treated decking boards. I cut them to fit, glued and nailed. Simple….

I added a little handle made from galvanized pipe and fittings….

You don’t have to add a handle or you can keep it simple by using a cabinet pull…I just like the “industrial” look of the galvanized material….

I also attached a power strip to the back…again, not something you have to do!

Super simple build! Seriously, this is not hard!

That being said, you do want a little chop saw and cordless drill to construct this project (nailer and kreg jig are option!).

But if you took my advice, you have these tools…and now you have a nifty place to store them!

Info

Comment

Wall planters....

My counter tops will be installed tomorrow… I AM SOOOO EXCITED!

I will share those next week but until then I wanted to share a simple little addition to my kitchen decor.

For some time I have wanted to grow herbs for cooking but I really don’t have the space for planters on my counters. I guess I could put some on the deck, but I just have this vision of reaching over and pinching off a fresh herb while I cook!

(Keep in mind if I have garlic, salt, and pepper, I’m good. And trust me, when these herbs croak, the planters will be filled with fake greenery.)

When I posted this picture last week, I realized I have the perfect spot for herb planters….

On the side of the upper cabinet!!!

So I went searching for wall planters on Amazon.

I found two…these…

And these….

I wasn’t sure which I would like better, so I ordered both.

I like the diamond ones better…

As you can see I only used three….Katie took the “spare.” I had planned to return the other set but she liked those as well, soooooo.

So far I have planted rosemary and thyme…I would like to plant cilantro as well, but in the meantime I used a little fake greenery I had on hand.

This window doesn’t get direct sunlight so I am not sure any will thrive. No biggy…the faux greenery looks pretty decent.

Time will tell!

I worry that the little planters make that space seem kind of “cluttered.” Maybe when the plain white tops are installed it won’t seem so busy…we’ll see BECAUSE THEY WILL BE HERE TOMORROW!!! YEAH BABY!

Info

3 Comments

ANOTHER KITCHEN MAKEOVER....

The last kitchen makeover was in 2016.

I did a “mini-makeover” a couple of years ago when I installed a new microwave and stove…

….and last year I finally added a new matching dishwasher.

I also did a little makeover on the dining room last year and I LOVE IT!

I sat on my hands long enough that the “white painted cabinet” craze is slowly dying off. Fortunately I don’t have the dreaded “honey oak” cabinets and still like my cabinets…and truthfully I loved the granite tops when I first installed them.

But for years I have been on a quest for “lighter and brighter” without painting the cabinets.

Two years ago I replaced the black bar top with white quartz…and I have coveted white quartz counter tops since!

See the mini makeover of my guest bath with white quartz!

I LOVE IT!!! I have Google and Pinterest searched enough to know that I would love white quartz tops with the “paprika cherry” stain cabinets and a travertine backsplash.

To give myself a “visual,” I bought some white shelf liner and white duct tape and covered one entire side of my kitchen with it…just to make sure I would like a “white” counter top.

I LOVE IT!!!

The “visual” really sealed the deal for me.

For several days I debated on whether I should get tops that have “veining” in them or just plain white. I even contemplated going back to the shop and picking up a few samples of quartz with some movement (the unique pattern of patterns that flow through the piece of stone) in them.

I decided the travertine has plenty of movement and “veining” and really needs to stand alone…I ‘m concerned that any “movement” in the quartz would “compete” with the travertine and make it all too “busy.”

This is my personal preference…either “movement” in the backsplash or top…but not both! I know people do both, but again, personal preference.

So white it is.

They measured and templated this week…

… and the new tops should be installed in next weeks!

I ordered a new black stainless single bowl sink! I would love to have a new black stainless faucet but, HOLY COW, those puppies are expensive so I may wait on that luxury!

I can’t wait to share!

Info

Comment

Bedroom step repair with gel stain...

About six years ago I installed laminate flooring in my master bedroom. I haven’t regretted it for a second.

One thing I did to save a little money was use gel stain on the oak thresholds and tread rather than buy new that matched the laminate. As I mentioned, laminate thresholds can be VERY expensive!

I sanded the finish a tad on each piece and then applied three coats of General Finishes gel stain and a coat or two of poly.

Usually gel stain holds up a tad better. I can only assume it has not on this step because I didn’t put enough top coat on it to protect if from constant foot traffic.

I decided the only way to fix this issue was to strip ALL the finish off the step…down to bare wood.

This entailed using my 1/2 mixture (1/2 acetone, 1/2 lacquer thinner). I didn’t want to get the stripper on the painted trim so I made sure to tape it all off with 3 layers of tape and put plastic down to catch any drips.

After stripping all the finish off, I lightly sanded it, wiped it down with a tack cloth then applied stain. I had to apply three coats to get a deep color that matched the floors. I let the stain dry well. This time I used hard-core poly specifically for flooring…three coats( lightly sanding and tacking between each coat)!

Niiiice….

A tiny boo-boo…seems some of the stripper managed to sneak through the tape and muck up the paint…oh well, another “honey do” on my list..

I used the same gel stain process on my bedside table tops when I painted them a few years ago. Brian’s has held up fairly well but mine has not…to many glasses of water and cups of coffee without a coaster!

My plan is to strip all the finish and gel stain off the tops of those as well and refinish them…someday soon!

I ordered new black door knobs for all the downstair doors. I painted the door knobs years ago, then painted the doors black…still LOVE! I used a good metal primer and paint on them and they have held up fairly well but I found relatively inexpensive knobs on Amazon so I decided to order them.

I have installed passage knobs and I am still waiting on the privacy knobs!

Just a few little projects to kill time during my home quarantine…projects I have been avoiding. Maybe I’ll clean out a few closets upstairs. Who knows…I do have a pile of good books I could work through as well!!

I’m kind of a homebody so I am use to being home…but when someone tells me I CAN’T leave, the 5 year old in me comes out!

Info

2 Comments

Guest bath makeover....

I’m trying to complete a few small projects…a few weeks ago it was my laundry room.

This past week it was my guest bath.

The guest bath is right across the hall from the laundry room…since I painted the laundry room a pretty “sagey green” I decided to tone down the blue in the guest bath. While I was at it, I decided to change out the counter top and backsplash.

I installed a glass vessel sink, a super awesome faucet and new lighting when I gave the room a little makeover a few years ago (probably a decade ago!) and I still love them so I didn’t need new ones.

(My dismal attempt to photograph dark cabinets with no natural light!)

The wall decor over the toilet had yellowed a tad because I sealed it with poly. (Yes, poly yellows…to avoid, use polycrylic or a clear coat sealant)

My “plan” was to paint the walls and trim, change out the top and backsplash, strip the cabinet and mirror frame for a “lighter” wood stain and repaint the wall decor.

After painting the room a lighter color and installing a lighter top (white quartz) and white backsplash and lightening the wall decor with a fresh coat of white chalk paint, I decided to stick with the vanity cabinet and mirror “as is” for the time being. I had stained the vanity “java” with gel stain years ago and I think it looks fine (but impossible to photograph!)…the mirror has a “java” stain finish, so it coordinates well with the vanity.

Just these few easy changes made a huge difference…the paint really lightened and brightened it.

Still love the Devoe prints I added two years ago!

One of my favorite little projects…a TP cubby! Super simple!

Fresh white chalk paint with a tiny bit of distressing…this time I sealed it with a clear coat so hopefully it won’t yellow again!

I would like to mention my trim paint…I painted it the same color as ALL the trim in my house. White would have been great but I decided to stick with the color of the trim throughout the house…just my personal preference.

Paint.

A must when you want to change a room! Whether you paint the walls or furniture, JUST DO IT! Paint is relatively cheap (only took 1/2 a gallon for this room) and if you don’t like it, you can always change it!

I love this little makeover. I have been coveting white quartz for my kitchen tops and this tiny bit has REALLY stoked the fire.

Who knows….

Info

2 Comments

ANOTHER laundry room makeover!

One nice thing about blogging is I can go back and know exactly when I did something…case in point, the laundry room.

Here I shared how the laundry room went from this….

…to this….

…in 2014.

I raised the cabinets to the ceiling and painted them. I painted the walls, stenciled the little birdie murals, installed a new light fixture, purged and added a little storage cart. Nothing earth shattering but enough to dress it up a tad.

The most dramatic thing I did to the laundry room was installing reed glass in the door. Here I share a tutorial on how I turned a plain ole’ hollow core door into a really awesome feature!

One thing I debated and am now glad I did not do…put a solid “top” across both the washer and dryer. I worried some day I might go back to a top load washer. Sure enough I did! The shelf is perfect and it is an element I kept!

The only other changes over the last few years was a little kitchen cabinet I removed in one of my kitchen makeovers and put in the laundry room and I moved the sewing machine to a little portable table.

When I painted the walls I was a tad frugal and used some paint I had on hand. I decided to go for broke and actually buy an entire gallon of custom color paint this time. Gasp! I wanted a soft “sagey/greenish” color so I did what I always do…headed to my favorite DIY store, picked up about 15 paint samples and brought them home. Took me all of 2 minutes to pick the perfect shade! Seriously, I think this is the perfect “sagey/green” color…I wish the photos did it justice!

THIS is the process I use for any “makeover”…whether a room or a piece of furniture. Find your inspiration, make a plan and execute the plan.

Inspiration came from cruising Pinterest. As I said in the first makeover, I don’t have the laundry room of my dreams but I have a space I want to be pretty and organized. I knew exactly what I wanted (the plan)…paint, storage, lighting and tile!

First step….PURGE! Empty out the entire space.

Yes, you are going to make a mess…there is just no way around it!!!

My goal is to NOT put back most of the stuff I take out. Now in my case, I am a pretty good “habitual purger” so I have very little “stuff”….but there are always things lurking that have been untouched for years and can go!!!

Next, remove the old light fixture, paint the ceiling (with a flashlight) and install a new fixture. It wasn’t that i disliked the old fixture, but it had fluorescent bulbs that got really hot and one of the three sockets evidently had a short or something because I could never get it to work right. I tried to change out the sockets in the fixture to accommodate LED bulbs, but the wiring was too short and I finally said “FORGET IT” and bought a new fixture.

Remove switch plates, shelving, and stuff on the walls.

Wipe everything down with a damp cloth….don’t paint over dirt!!!

Build storage shelving. I have lived here long enough to know what I need and how I want a space to function.

Caulk the new shelving.

Paint the trim, then walls.

A new shelf…I went with poplar sealed with a clear finish…no stain. I may or may not stain it or paint it in the future…for now, I like this look!

Then a debate. Do I or don’t I stick with my original “plan.”

So my original “plan” called for tile on the wall behind the washer and dryer. I really gravitate towards that look and every time I see a picture of it on Pinterest, I really love it. Yes, that would mean losing the birdies…

HOWEVER, as I have mentioned many times before, NOTHING is “timeless.” And I know me well enough to know that in 5-6-7 years I will not like whatever tile I pick out today…which means that sometime in the future I will have to remove the tile, repair sheetrock and do something else.

NOT something I look forward to. A huge reason why I didn’t put wallpaper in this house 20 years ago, even though it was still a “thing.” I had removed enough wallpaper in my years to know I never wanted to do it again.

So…no tile…for now! I painted the wall and added a little “farmhouse” mirror. The light fixture and the mirror add a touch of “farmhouse fad” without breaking the bank. This is a small room so the mirror is a huge plus!

The storage shelving is THE BOMB!

Love it…it is something I have wanted to do for years! And again, since I have lived in this house for 20 years, I knew exactly what I need. A place for doggy towels, some simple baskets for light bulbs and dust rags and plenty of room for my detergent stockpile! I designed the shelving so I would have the perfect spot for my sewing cart (See how I “upcycled” an old typewriter cart to make a portable sewing table HERE!) At the last minute I added a shelf above the sewing cart so I would have space for a sewing machine if I ever did away with the cart in the future…right now it holds my little coupon box.

Keep in mind that the cart between the washer and dryer I built on the last makeover holds a ton of stuff…dryer sheets, MORE detergent, the iron, spray starch, etc.

The back of the cubby is perfect for storing paints…remember, STORE YOUR TOUCH UP PAINT IN THE HOUSE!!!! Not in the garage or storage building!

Since I now only do laundry for two, my laundry room isn’t near as chaotic as it was when I was raising kids. But whether you do 8 loads a week or 30, there is NO reason to have a disorganized and blah laundry room. Get it organized. Make it a space that is beautiful…it won’t take the sting out of doing laundry but maybe it will make the experience a little more enjoyable.

Info

Comment

New vinyl windows and a little window seat makeover...

This is one of those “needs” with a little “want” thrown in.

Any time I think about buying something or doing something I ask myself “Is this a need or a want.” Wants are okay…as long as you don’t go into debt for them or harm another person in pursuit of your “want.”

The “need” was new living windows. The old arch window was cracked and had condensation between the panes.

I have managed to ignore it for some time because in the hot months I have a temporary shade in it and in the fall and Christmas seasons I have cute little vignettes that block it…but this time of year it just consumes this room and it is near impossible to ignore!

The lower window was the original aluminum window and that thing might as well have been wide open on a cold blustery day. It leaked cold air like crazy!

So…a need.

As you will notice I changed up the “configuration” of the window…I went with a fixed window in the middle with two crank-outs (technically called “casement” windows) on each side. I have a crank out in my bathroom and I LOVE it…super easy to open and close!

When I measured for the new window I measured the outside opening…that is because the new window was going to be installed from the outside and I had to make sure it would slip between the brick.

While it fit snug between the brick…

… it had 1/2 “gaps” on the inside…

Usually the new window would slip in right behind the sheetrock that butted up to the old window…not the case here. I suspect it is because whoever bricked this house did not brick over the old window properly.

No biggy…it gave me ample room to put in A LOT of insulation! Silicone caulk around the outside…a must for ANY window! There is NO air coming in around this puppy!

It did mean I had to trim out around the new window. Again, no biggy. I used 1x4 pre treated boards and flat molding…good as new!

One issue I had was the existing seat cushions…they were not going to work because of the window crank….

The cushions are really not an issue for several reasons

I only added the cushions to help block some of the air leaking in around the old window. Second, the fabric has faded over the years and I needed to recover them! And lastly, nobody but the cats sit in this space so comfort is really not an issue.

So the cushions can go…but then I am left with the stark white of the faux marble…ick. Again so 90s!

Sooooo….I decided to remove the faux marble and add stained wood “bench” type seating before I put up the new trim!

Course I wanted walnut…but finding walnut boards proved to be impossible. I ended up using oak boards…NOT my favorite wood, but it was either that or poplar (too “green”) or pine (too ick).

The marble was super easy to pop off….heavy as crud but simple to remove. It was just siliconed in.

I bought 1x6 and 1x4 oak boards. I like the “plank” look so I used the router to add a VERY small groove on the top edge of each board. On the board that would be on the outside edge , I used the router to round the edge.

Again, I did not take pictures of the “process” or make a tutorial…I am a HORRIBLE teacher/blogger! Just sharing what I did!

After cutting each board to the proper width and routing the edges, I stained them with brown mahogany stain and sealed them well with poly BEFORE installing them.

Once the finish was dry, I finally got to use the biscuit joiner Matt got me for Christmas two years ago! I love this little tool. Because of the layout of this bookshelves, I couldn’t make the entire seat in one piece. I had to lay in each board one at a time. The biscuit joints allowed me to get a tight, even fit without having to nail into the top of the seat! Love!!! I just glued the “biscuits” and edges, and slipped them together!

After the new wood seats were done, I trimmed around the new window.

I removed the blind from the side window…after 20 years of neglect that thing was pretty nasty.

I will eventually replace this window as well since it is one of the original aluminum windows.

I haven’t decided what to do about window dressings. I have lived without a blind in the big window for years…we live at the end of a cul-de-sac and I don’t roam around in this room “indecent” and this window faces south so it doesn’t get a ton of sun in the summer months. The side window faces the fence and there is little view to the inside of the house so for the time being, I think I’m fine without a window covering!

I love the new look…again, I think stained wood always adds a little warmth to an area and this big sucker could use some “warmth.” And the new windows are AMAZING!!!! We have winter weather this week and not a drop of cold air can be felt around the window…and I CAN NOT WAIT to crank these babies open on a warm day!!!!

This photo of the outside reminds me of how “blah” the house looks in the winter compared to a summer view…

This one reminds me that we desperately need to power wash the brick this spring!!!!

I haven’t painted the trim just yet…truthfully this entire built in needs to be painted. I haven’t painted it in 20 years and I know it was originally painted with alkyd (oil-based) paint.

When we painted Matt’s bedroom a few weeks ago, he found a new “hybrid” paint…an acrylic alkyd paint they SAY will go over oil based OR enamel paints. I know the paint went on like an alkyd…leveled beautifully….and cleaned up like an enamel (with soap and water!)

While the paint went on well and cured well, my biggest concern is durability. This area gets a lot of wear and tear and I don’t want a paint that dings easily. Oil based paints are outstanding for furniture and wood pieces…super durable!

So I am going to wait a bit and see how Matt’s holds up…in other words, let him be the test monkey…lol! If his trim holds up well, then I will use the hybrid paint. Or I might just bite the bullet and use an oil-based. I know me well enough to know that a bug can bite me at any moment!