Little projects that can make a big impact!

While my garage is packed with projects I should be working on, the heat and humidity are just too much. This past week I worked on a few little projects inside!

The first is a "not so little project" but one I have been putting off for a loooong time! I shared the new living room chair I reupholstered here. I also had a little MCM chair and fabric ready to go but I could not bring myself to start the project. Upholstery is one of those things I do ONLY because I like the final results.

I was hoping duck egg blue and mauve would miraculously come back into vogue so I wouldn't have to mess with it, but that's probably not going to happen anytime soon! (Those who remember the 80s will understand this!)

A teal club chair was one element of my den makeover plan I shared over a year ago. As I mentioned in the reveal post, not all elements of a makeover happen overnight...some may take years. Case in point!

Anywho, this wasn't technically a "little" project. I pretty much had to deconstruct the entire chair, strip and reoil the wood (beautiful!) and then reupholster.

Once it was done....BIG impact.

But I really did accomplish two relatively "little" projects that have been on my "to do" list and that made a big impact.

The first was changing this little "gallery" wall....one of my "Things I Love" features. Family photos.

Honestly, these have not changed in 16 years but I want to change it up in my quest to "lighten and brighten" elements in my house. Since I am transitioning from the "warm" blacks and burnt reds to "cooler" reds, off-whites and teals, I decided these frames would be easy little elements to update with a little paint and new mats. Still love the pictures...just not how they are displayed

Here I shared the changes to the pictures on my dining room wall....

Just painting the frames and adding new mats made a HUGE difference in this space and cost very little.

I removed all the matting, photos and glass from the frames (good time to REALLY clean the glass!) I had mounted these pictures ON TOP of the matting so all I had to do was cut new teal matting using the old mats as a template and then reattach the photos using double sided tape. Frames are super easy to paint...a little primer and a little spray paint (Valspar Riviera Dune...my favorite off white spray paint)

Perfect! (Um...yeah...I need to do something about the nasty looking thermostat!)

The other little project was super easy as well. I have wanted "modern" type house numbers for some time. I even painted some on my front door several years ago.

The actual house numbers that can easily been seen from the street are in the gable above the garage door...just cheapo, boring black numbers. Right now they are covered up with the "ivy" that is creeping all over the front of the house and at Christmas they are covered with a huge wreath (that warranted a visit from the code enforcer one year!)

In my defense, this stuff usually doesn't get THIS out of control. Brian usually pulls it down every year when he puts up the Christmas lights. But last year we used one of those "star shower" thingies and didn't put any lights on the house...so...well...it is out of control!

I have a plain "ho-hum" brick column on my tiny front porch that I thought might be perfect for a number display!

I ordered the "modern" style 4.5" numbers from Amazon.

Somewhere along the way I picked up a plank of walnut. I've kind of been hoarding it for the last few years waiting for the perfect project and this was it.

I laid out the numbers on the board, measured and then cut the board the length I needed. Not sure how well tung oil finish will hold up outdoors, but that is what I used to seal the wood (3 coats).

Then I measured and marked where each number was going to go, drilled holes, secured the numbers using hardware screws, and then mounted it all on the brick column.

I used masonry screws to attach the board to the column. Since I didn't want the screws to show, I drilled a hole 1/4" deep with a 1" paddle bit, then pre-drilled in the middle of that hole for the masonry screws and then covered it all with hardwood plugs.

Dabbed a little tung oil finish on the plugs....cute as a bugs ear!

Doesn't look like the heat is going to let up any time soon so I have hauled several pieces into to the dining room to chalk paint! Maybe I can get a little bit of projecting done and get some room to breath in my garage! Maybe....

Info

Comment

Heirloom stool....

I know I probably sound like a broken record, but I don't decorate with just anything...the "stuff" I decorate with has to be things I love or heirloom pieces!

A few years ago I picked up a couple of stools and dolled them up a bit and featured here.

The one I liked most was the one with the birdies...but every time I wanted to open a kitchen drawer I had to move it. So I sold that one and have been using the yellow stool.

But this past Christmas, when I was hauling decorations out of my packed attic, I spied an old stool that had belonged to my great-grandfather. I believe it was the stool he used at his drafting table. I have had it for years but it was in pretty bad shape, so I had stuck it in my attic and pretty much forgot about it.

I finally hauled it down to the garage and decided to give it a little makeover. The first thing I had to do was strip and oil the oak base using this process.

I had a little leftover fabric from this chair project so I decided to use it to recover the seat.

Did I take a "before" picture...um...no. Just imagine...old, dated, well used.

The upside is it fits perfectly under the kitchen drawers. Now I can use this precious family heirloom!

Oak is not my style...but anything that belonged to family is...another "thing I love."

HAPPY BIRTHDAY KATIE!!!!

I want to take a minute to wish my precious, beautiful, smart, funny, talented youngest daughter a very happy 19th birthday...I can't believe you are entering your last year of teenhood! I have no doubt this next year will be as amazing as the last 19! You make a mama very happy and proud!

Info

Comment

Mid Century Chair Makeover and the trick to sewing vinyl!

Recently my mother has been on a purgefest. As a result, I have inherited a few beautiful pieces of furniture and several sets of family china.

This little table was one that belonged to my paternal grandparents and is the catalyst for my entry makeover that I will finally share next week.

Not really my style, but again, it combines two of my first loves....heirlooms and walnut!

This little chair belonged to my maternal grandmother...so when my mom offered it to me I honestly could not get it in my truck fast enough! THREE of my first loves....heirlooms, mid century AND walnut!

(Again, excuse the quality of the picture...this is from my phone!)

As much as I would love to keep it, Katie tagged it for her condo. Since neither of us were real keen on the finish or the fabric, I immediately put her to work stripping and oiling the frame using this process and finding a new fabric for the cushions.

After looking online at similar mid century chairs, she decided to go with a "leather look" white vinyl. Beautiful, but the fabric has one serious drawback.

It wouldn't go through my old sewing machine! (When I say old, I'm pretty sure I bought it before my oldest son was born...28 years ago!)

I have used vinyl and naugahyde before, but always for recovering chair seats...like these mid century dining chairs! I had never actually used it for a sewing project. I discovered that the vinyl-like material was NOT going to glide through a sewing machine, which posed a real problem when one needs to make new covers for a cushion, including all the piping!

My uber smart, engineering minded daughter came up with a perfect (all-be-it tedious) solution. Wax paper!!!! I encased the strips of material I was using to make the piping in strips of parchment paper (that's what I had on hand and it worked just as well!), and it went through the machine like butter!!

Since the vinyl had a fabric backing, it was not an issue to sew the cushions together since I was sewing the fabric front to front...so the back of the fabric was what was feeding through the machine. The only real problem was when I was making the piping because I was having to sew on the top of the fabric....that is where the parchment paper came in handy!

I covered the old foam with new batting just to give the cushions a little extra loft! Eventually Katie wants to add two little "button tufts" to the back cushion!

After all the tedious machine work, the cushions turned out beautiful!

Katie has stripped and oiled her new coffee table, I built a little entertainment cabinet and coffee bar and we still have another little tufted barrel chair that needs to be reupholstered. Move in day is this weekend so we may not have everything done but we are getting there! I have been buying kitchen ware at auctions and thrift stores and their kitchen should be well stocked! Exciting time for my baby girl!

And when we get done with all our little projects, they will have one groovy pad! (did I just show my age...lol!)

Until next week when I FINALLY share my entry makeover....

Info

3 Comments

The unwanted chair....

I run a shelter for unwanted furniture.... injured, abused and neglected. Before a neighbor hauls off a piece of furniture, they usually call me first to see if it is something I might want. Or they just drop it in my driveway...I have come home on more than one occasion to find an abandoned piece of furniture on my door step!

My next door neighbors brought me this busted chair a few months ago.

The chair my neighbor, Paula, brought me was a little on the "formal" side...needlepoint fabric, upholstery nail heads, intricate carvings...but it had a busted leg. . Fairly easy fix for me...a little glue and clamping!

The hardest part of redoing these chairs is removing the billions of tiny upholstery nails. I ordered those nifty staple and nail removal tools. Forget about it! In the end I used a flat head screw driver, a hammer and needle nose pliers.

After I removed all the nails, staples and upholstery, I chalk painted, distressed, and sealed the wood frame and then reupholstered it. These little chairs really don't take a lot of fabric so I decided to use some scraps I had on hand from another project!

The fabric may be a tad "casual" for such a regal chair, but personally I think it brings it down a notch...not so houtie-toutie!

Rather than use upholstery nails, I went with gimp trim...much simpler!

I've been pretty swamped the past few weeks. My oldest daughter graduated from college and my youngest daughter moved home for a few weeks until her condo is ready. In the meantime, we are building, stripping, upholstering and painting pieces for her new home.

One thing about little sis...she is learning that if you want something nice, sometimes you have to roll up your sleeves and do a little work. A lesson my dad taught me! Her first major project was this oak library table....now I think she has "the bug!"

So this past week Katie has been a busy little bee (funny since she actually raises bees!) She even attempted to make a dove tail coffee table...after all, she watched youtube videos and it didn't look too difficult. I tried to tell her those guys have been doing that kind of detailed work with VERY sharp tools their entire life. After she dang near sliced two of her fingers off with a chisel she decided to put that project on hold for a time. I ended up buying a beautiful MCM coffee table and she promptly went to work stripping the old yellow finish off! I am making her entertainment cabinet and we still have a few chairs to reupholstery!

Busy, wonderful time. I have several "resale" projects I need to be working on but I have learned that time with and for my kids is what is really important. I can't remember 1/2 of the stuff I have repurposed and sold over the years but I remember every skill my dad taught me.

There are things that will last a lifetime...and beyond.

Info

5 Comments

Reupholstering the new living room chair...

I have said it before and I'll say it again...if you ever complain about the cost of reupholstering a piece of furniture, give it a shot!

Trust me, you will never complain again...and there is a good chance you will just buy new!

I spent over $200 just for the fabric for this chair!

It's not really "my style" but I wanted to use it to replace the big hulking brown leather chair in the living room and this one was a "freebie"...for obvious reasons. It had to be big enough for Cleo because that is "her chair."

Perfect fit.

And honestly, with a down cushion and deep seat, it is super comfy! Not that I would have sat in it before it was completely stripped and covered with new batting...but it LOOKED comfy!

There are THOUSANDS of tutorials on line for reupholstering just about any style of chair so I am not going to do a blow by blow tutorial on how I reupholstered this one. Your best bet is to find a tutorial for a chair similar to the one you are going to do. Besides, it took me a day to strip it and removed 2,453,692 staples, a day to sew the cushion cover and all the piping, and another day to upholster the main frame....my hands were in no shape to hold a camera!

My advice...buy a new chair! HOWEVER, if you insist on reupholstering a chair, find a good tutorial and settle in for some serious work!

I do love how this one turned out. I really want to infuse some "lighter-brighter" furniture so I went with the teal/cream print. I like the texture of the fabric and I think it will be very durable which is important since Cleo immediately reclaimed her spot!

Naturally the new chair means I will have to buy a new rug, but since Katie wants to take the existing rug to her new condo this summer, I have a valid excuse to buy a new one!

My next upholster project is this little MCM chair in my den....

Seriously, if I hadn't already purchased the fabric, I might have just said to heck with it and wait for the mauve and pale blue to come back in style. Or just buy a new one! But I adore this chair so when my hands regain their feeling, I'll move on to this project!

The weather has been pretty amazing so I have managed to finish up quite a few little projects, in spite of the fact I can barely grip a paintbrush, so I'll share a few in the coming weeks!

Info

2 Comments

A special birthday celebration!

If you follow me on Instagram, you know my dog has become my "fifth child." Yep...that is what happens when you become an "empty nester." You take and post waaaay too many pictures of your animals and, of course, you celebrate their birthdays!

Wednesday we celebrated Cleo's 2nd birthday! If you go by "dog years," I officially have another teenager!

Our grandpuppy, Zoey, came to celebrate with us!

They LOVED the pup treats...the hats, not so much! Zoey wouldn't even wear one for a picture....party pooper!

And of course I have a TON of projects in the pipeline....three chairs to reupholster, five little dressers to repair and rehab and who knows how many other little projects piled in the back of the garage!

I did get a few pieces finished and ready to take to 410 Vintage...this shelf/desk is only one of many...but as usual I either forget to take before OR after pictures...in this case, the before.

Imagine honey oak...eeeck! A little KSTP treatment, and again, another lifetime of awesomeness!

I know I harp on it, but it bears repeating. The ugliest piece of furniture can be dolled up with a little paint!

I have four dressers lined up in the driveway ready to strip and paint IF the weather will cooperate. I think that is one of the biggest problems this time of the year. One day it is 70, the next we have a freeze warning. So I shuffle stuff around and work on what I can depending on the weather. Some days it is too cold or windy to paint, so I use those days to do repairs or work inside on upholstery projects. Then when it warms up a bit, I paint, but if it is too windy I can't spray paint. Curses!

Not going to complain because in few short months I will be gripping about the heat! And honestly, this is what I love about Arkansas...four seasons! I just wish it would make up it's mind from one day to the next!

Info

4 Comments

Dining room table makeover and my recent angst!!!!

Choosing fabric for a piece for "resale" is a tad easier for me than when I have to make a decision for my own home! It is still a struggle, but not nearly as difficult as choosing a fabric for myself.

Primarily because I know how much work goes into reupholstering a piece and I know if I go too "trendy" I will end up having to redo it in a few years. It is one reason I "stay safe" with bigger pieces like couches and chairs...then I use throw pillows, blankets and rugs to pull in the "in" colors. Those things are easy to change...and I don't cringe too much if I have to donate a $15 pillow vs. a $2000 couch!

Example...I bought this ugly table and chair set at an auction....

In this condition, not appealing in the LEAST and not fit for any space...very dark and dated! But this is the kind of thing I know I can work a little "DIY magic" and make it perfect for another lifetime of use!

Not that I don't struggle with deciding paint colors and fabric for these pieces...this one sat for a while. I knew I would have to paint the top...it is laminate so it couldn't be "refinished." The legs on the table and the chairs are solid wood and in halfway decent shape but the vinyl brown seats had seen better days....that had to go!

I chalkpainted and distressed the table legs, primed and painted the top a flat black and painted the chairs a "steel blue." I found an awesome black/grey tweed upholstery fabric for the seats.

I saw several tables on Pinterest with this upholstery nailhead detailing and knew immediately I wanted to do it when I found the perfect table...and this table is perfect!

That little detail really makes all the difference, was relatively inexpensive (about .50 each!) and was not difficult. I just measured and marked where I wanted each nailhead to go, drilled a tiny hole, then hammered them into place! Cute as a bug's ear!

Obviously someone else thought it was cute as a bug's ear...it sold the day after we took it to 410 Vintage.

Which brings me to my recent angst! Chairs for my own home!!!

When I remodel my den last year, I knew I wanted to add a teal club chair. I bought this little MCM style chair a year ago and it has sat in my den since, waiting on time and inspiration! It is the perfect size and style for this space, but of course the upholstery is all wrong!

I finally went to the fabric store last week and pulled a bunch of fabric samples that caught my eye. I THINK I have decided I like this teal tweed fabric. This fabric works well with the style of the chair and is pretty much the color I was leaning towards.

I found this chair just last week and I THINK I want to use it to replace my big fat leather chair in the living room!

It is a tad more "traditional" than what I really like but that is okay...again, that is the great thing about having a mosh-pot of styles...or "eclectic" as they say!

One of the reasons I want to replace this chair is because it has become "the dog's chair." In other words, Cleo has claimed it as her own. She sleeps in it, sits in it and jumps on it when anyone comes to visit her (and EVERYONE is coming to visit HER!) As a result, it is in pretty bad shape.

So naturally, she has to check out the new chair to make sure it is comfortable FOR HER!

Not nearly as roomy as the leather chair, but she looks pretty comfy!

Again, fabric samples and nail biting choices....

I kinda sorta like the idea of doing a "two fabric" design. The grey geo on the sides and back, and the black for the cushion. But then again, I worry about being "trendy" with something that is going to require a lot of time and work, so I am leaning towards the simple, one fabric choice in blue.

What to do, what to do. For now I am taking my own advise. Looking to Pinterest and Google search for "inspiration." Looking for chair upholstery I LOVE that will work with this style and in my space!

It is the ONLY way I know how to make a decision and know it will be one I will be happy with for many years.

Info

Comment

Sewing table....

I have shared this project before but with sewing and upholstery projects lined up on the dining room floor, it deserves another feature!

After a few weeks of working non-stop at the apartments, I finally have a little time to tackle the growing mountain of projects in my garage. Yesterday was spent prepping, priming and painting.

There has been a real "chance" of rain predicted for today all week and Mother Nature did not disappoint. Rain. Lots of it. So today, with the rain preventing me from getting out and finishing up those projects, I decided it was time to tackle one of my LEAST favorite aspect of DIY projecting!

Sewing...my nemesis! But it is an (evil) necessity if you are a DIYer! Just too many little projects require, at the very least, a straight stitch. The simplest upholstery projects, decorative pillows and curtains require the service of a sewing machine!

As I mentioned in this post, it is important that I have a way to store and use my little portable (and very old) sewing machine! Nothing fancy...pretty much does just the basics...straight stitch, zig-zag, button holes (which I NEVER use!)

This little portable table has been a life saver!

This was a little rusty typewriter table I bought at an auction...you can see how I dealt with the rust here and brought it back to life with a little TLC. I use to set my machine on my dining table, risking scratches and damage to the table and limiting where I could work on my sewing projects!

The portability of this table make it super easy to store it in the laundry room cubby!

As I have mentioned before, if you don't know how to sew, learn the basics! Take a class at your local hobby store or have a friend teach you! It isn't difficult and again, definitely necessary!

Info

1 Comment

Simple bench or stool makeovers...

At least once a month I run across pathetic little benches or stools at the auctions or in thrift stores. I have featured a few in the past....

...this cute little piano bench here....

A bench I made for my daughter out of an old coffee table here....

My dad's old tool bench....

I use it as a little side table next to the chair in the den! This is one of those things that serves a purpose and has tremendous "sentimental" value as well!

And at least a dozen or more I failed to take either before or after pictures of over the years! I'm a baaaad blogger!

Trust me....they are super simple to makeover with a little paint and fabric and always turn out precious!

Recently I did a little footstool and bench and actually remembered to take a before AND after picture!

This little foot stool was pretty pathetic in it's original state....

I stripped the fabric (and removed at least 2,483 staples), chalk painted the base, distressed a bit and sealed with poly (gives lighter paint an "aged" look), added a little bit of foam to "fluff" it, new fabric and new "gimp" trim.

Cute as a bugs ear!

I found this old icky coffee table at the apartments. Like the old coffee table I turned into a houndstooth bench for my daughter, it was pretty worthless for it's intended use...a coffee table.

I removed the top (super simple...a few screws), added foam padding and batting and covered it with fabric and gave the base a little KSTP treatment. Reattached the top to the base with screws. Super simple!

Both are now in my new flea market booth at 410 Vintage in Fayetteville! Awesome place so make sure to drop in sometime and check out all the AMAZING treasures!

Next time you see a ratty old foot stool or a dated old coffee table, see it for its potential! They are super simple to make-over and are perfect for additional seating or a place to throw your clothes at the end of the day...and of course, they are the perfect little touch to add character to your home!

Info

7 Comments

June 2015...and MORE chairs!

June 2015 will go down as an eventual month for me.

For the first time in 34 years, I have no minor children. Katie turned 18 this week and it is official...ALL my children are old enough to vote, be drafted and be sentenced to an adult correctional facility.

We finally had to put our wonderful lab, Ginger, to sleep. She was 13. It was time but that didn't make it any easier. This is the second precious pet we have lost this year. Heart breaking.

And for the first time in years I really felt the sting of Father's Day. My dad has been gone for 20 years but this year was, for some reason, tougher than normal. He died exactly one week before Father's Day so this time of the year is always kind of a "double whammy."

Then there is the accidental "new member" of the family....and may explain some weird typos in my posts.

I keep a trailer at my apartments for abandoned furniture. A mama cat set up household in the furniture with her 4 babies. A few weeks ago, we THOUGHT we made sure all the kitties were off the trailer before we took it to the dump....only to find two of them still on the trailer when we got there. I managed to grab one and throw it in the truck, but the other ran under the truck. We spent 30 minutes crawling around on the nasty red clay/garbage ground trying to get that stupid kitten, only to have it bolt. Gone. I was heart broken. But to make matters worse, I could not find the other kitten ANYWHERE in my truck. Both Matt and Katie helped me darn near dismantle the interior of the truck...it was not there. I left the windows down the entire day and even put out some food just in case.

THREE VERY HOT DAYS LATER I went to the truck in the evening...and there was that silly kitten sitting on the back of the seat. It had been in a hot truck, with no food or water, for THREE DAYS! I couldn't believe it survived and neither could the vet.

Soooooo....we have a new "miracle kitty." And being the softy that I am, I can't bring myself to take it to the shelter. Especially with all the guilt I feel for losing her sibling and in spite of my puffy, itchy eyes.

Yes, she is a she. About 8 weeks, according to the vet, but if that is the case, she is a tiny kitty.

Cleo thinks it is hers and tries desperately to carry it around in her mouth...which means the poor kitten is constantly soaked in dog slobber. It is pathetic, but she tolerates it for some reason. And typing on the computer is like a game to her...hence the typos. She's a funny kitty!

We haven't named her yet...I keep hoping someone will want her and take her so I will quit itching and sneezing. Why bother...if the three other cats haven't killed me by now, this little half pint won't either! I like Mimi...Katie does not. Mitchell suggested Kitty, but we have a Ms. Kitty because she was another "rescue" that was only suppose to be here until I had time to take her to the shelter...around 9 years ago. So he suggested Little Kitty...so maybe "Litty."

ANYWHO!!!!! When I am having "emotional turmoil" my tolerance for some things is darn near nil. So when I went up to my booth last week, I was annoyed by a few things that have been sitting in there for MONTHS...specifically two chairs. So I threw them in the back of the truck, brought them home and gave them a quick makeover!

The first is a little folding chair I chalk painted eons ago...I had two and sold one, but this one has hung around far too long. I gave it a little KSTP (Kilz/sand/tack/paint) treatment with white spray paint...then I covered the seat with some leftover fabric from this chair makeover!

The other is a walnut mid-century chair. It is really difficult for me to paint over walnut...but the chair has been in my booth for months as is, and if I am going to sell it, I have to give it a little "pow treatment." Again, a KSTP treatment and new upholstery...someone is going to love it!

I know I make these little chair makeovers sound easy. And usually they are! Chairs are one of the easiest pieces of furniture to "update"...especially ones that just need a little paint and fabric on the seat.

But OCCASIONALLY I bring home a real kicker. One I KNOW is going to take a LOT of time and attention! This chair is a prime example!

I know...it is a HOT MESS!!! I have NO doubt that several people at the auction where thinking "What the heck?" (Including Brian...but again, I think he now trusts my judgment!) But I was so excited I couldn't stand it!

I was pretty sure, from a quick inspection on a broken piece (that was there, thank God!), that it was most likely mahogany. At this point, after just a tiny bit of research, I THINK it is a Victorian Eastlake arm chair. But I honestly don't know because so far I haven't found anything just like it...only similar. Castors on the front legs and not on the back and hand carvings and stamps on the wood.

And of course the BILLIONS of little nails that were used for the upholstery! ALL of which had to be removed!

I knew the finish was masking some beautiful wood so I couldn't wait to start stripping it! In this picture you can see where I applied the stripper (used in this tutorial) on the left....

Here is the "before" and "after" of the side...

The intricate carvings require some real work, but as I have said before, the very best tool for stripping old finish out of carvings and corners is a good ole' toothbrush! I still have a lot of stripping and scrubbing to do but after two afternoons, I have all 100,398,365,003 nails out and a tiny bit of the frame stripped!

The fabric is in such bad shape, I honestly don't know what it is...and I wonder if it didn't originally have another fabric on it since there are SOOO many nail holes. Many of the Victorian chairs I have seen have a velvet fabric....what to do, what to do!

My point...not all chairs are easy...some require a little more time and attention. I am going to take my time with this one and there is a good chance I won't sell it. At least not until the next little treasure comes along!

Info

11 Comments