Simple makeovers for the worst offenders...the KSTP treatment!

There is NO excuse for ugly furniture. With warmer weather just around the corner, it is time to start looking at your furniture with a critical eye and making a list of pieces that CAN be changed with just a little bit of work!

We all have it...those "cheapo" pieces of furniture that are, at the very least, offensive! Maybe they were given to you, maybe you bought them at a "discount" store...maybe you bought it at the thrift store to fill space in a room.

Pressed board construction, laminate tops, dated finishes, pieces you put together with a little allen wrench thingy that came with the worthless little "screws" that promptly strip out and leave the piece wobbly and worthless!

It's ugly and cheap, but seriously who has the money to buy "real wood" furniture when you are struggling from pay check to pay check and having to buy shoes for a kid whose feet seem to grow a size every month.

I get it...I've been there. Fortunately I have learned to shop resale and auctions for "quality" pieces...and even if they need a little TLC, I have the tools, knowledge and time. But not everyone has that...or the money to buy and refinish high quality pieces.

That is why I advocate the KSTP treatment. Let me explain....

First, before you even get to the KSTP treatment, ALWAYS give the piece a good cleaning. On the nastiest, I use ammonia water but some can just be wiped down with a little water and mild detergent. Whatever you need to do to get the gunk off the piece! If it is "stuck" on just scrape it off with a razor! No matter if you scratch the finish...you are going to paint it!

Second, make any and all repairs that need to be made...and if you don't know how to repair it properly, google it!

Okay, now the KSTP treatment....

K- Kilz (my favorite primer but any QUALITY PRIMER will do! That is why this is the KSTP treatment and not the PSTP treatment!)

For smaller pieces I use a spray can only because it is easy and gives me a nice smooth finish. On larger pieces I use a brush and 4" foam roller! TIP! Always shake the can longer than the directions recommend. Kilz will spray on with a "grainy texture" if you don't shake the can well! No biggy since you are going to sand anyway, but just makes it a little easier! Also, pay attention to the temperature recommendations...it matters!

Many paints SAY they are a "primer and paint in one." Sorry, I am old school....I ALWAYS prime and I personally recommend it. If you want a superior finish that will hold up to use and abuse, prime!

S-Sand. A 220 grit paper will usually smooth out the piece after it is primed. I wrap a piece around a sanding sponge block!

If you have "ornate" legs or detailing, use 000-0000 steel wool.

USE YOUR HANDS, not your eyes. Feel the piece.

Trust me, if it isn't smooth, it WILL show after you paint it! Sand it until it is smooth to the touch! If you cleaned the piece well, scraped off all the gunk, this step really should only take a few minutes.

T- Tack cloth. A MUST after you sand but before you paint (or apply any finish). Blow or brush off as much as you can, then use a tack cloth!

You can purchase it at your favorite home improvement store...usually in packages of 2 and relatively inexpensive (around $2)! You can wipe a piece down all day with a clean cloth, but you WILL leave "stuff" on the piece if you don't tack cloth it. Tack cloth will remove EVERYTHING. If you still feel "stuff," hit it with the sand paper again and then tack cloth again!

P-Paint. This is where people usually freak out. My favorite for wood or laminate furniture is oil-based but it can be a tricky paint to work with for a novice and difficult to clean up. Fortunately latex paints have come a long way and are much more durable these days! QUALITY spray paint is probably your best bet for smaller pieces. I say quality because you can buy spray paint a tad cheaper at discount stores, but I am not a huge fan of cheap paint for ANY project! I usually buy Valspar or Rust-oleum from Lowe's.

On smaller pieces of furniture the difference will only be a few dollars but will be worth it in the long run.

Each of the brands come in LOTS of great colors...just find the color you love! I have found very little difference between the two brands...the Valspar tends to dry a tad quicker....but both are quality paints! ALWAYS shake the cans well and follow the directions on the can!!!

I have followed every tip in the book to get rid of the occasional "striping" on large, flat surfaces...like dresser tops or table tops. It doesn't seem to matter how I spray, what the temperature is or how hard the wind is blowing...sometimes I get stripes.

My solution has been to purchase the little "sample pots" of paint custom mixed to match the spray paint I am using and roll it on the large flat surfaces with a 4" foam roller!

Penetrol and Floetrol are a MUST any time you roll or brush on paint...oil or latex!

Use it. It will eliminate the brush and roller marks and give you a MUCH smoother finish!

These are just a VERY few projects using the KSTP treatment (I have done hundreds!)....world of difference for a little bit of work! I am working on a piece right now that is in the S stage...primed and sanded but now I need to figure out what color I want to paint it...soon!

Even light fixtures and paddle fans can be spray painted!!! On metal pieces and furniture hardware, I use metal primer primarily for the "rust retardant" factor!

One last important TIP when using ANY technique to paint anything....ALWAYS give the piece time to cure before you put it to work!

I was always skeptical of those "two day" makeovers they did on tv where they would paint something and then "stage" the pieces with all kinds of stuff within hours of putting a final coat on. (Kind of like getting your nails painted at the salon...even though you dry them for 10 minutes, you are still going to ding them if you dig in your purse for your keys! Unless you get gel polish...awesome stuff!) Trust me, that is the fasted way to ruin a finish! Don't do it...be patient and give the paint time to harden (cure) before you set a lamp on it or try to hang the fixture (trust me...I have had to repaint many pieces because of impatience!)

One dated, nasty, cheapo piece of furniture can ruin an entire room. Toss it or paint it! YOU CAN DO IT!

*I have not been compensated for pimping these products! These are the products I use and work for me!!!*

Info

Comment

Antique mahogany dresser makeover....

AGAIN, no kitchen reveal. I know...disappointing! But I am still waiting on the trim I ordered to finish out the little details and when I get that done, I will share. Course now I mulling over the idea of putting in glass doors...maybe a little more paint...maybe a little more lighting. See, it never ends!

So while I impatiently wait I am going to share a pathetic little dresser that came to me by way of my neighbor. It had a few more repairs than he was willing to tackle...for me, no biggy!

Chipped drawer fronts, damaged veneer top, and a pretty sketch wiring job on the back legs that was evidently keeping the entire thing from exploding...because when I removed it, the cabinet pretty much fell apart!

The veneer really wasn't in that bad of shape when I got it. Naturally, I forgot to take a picture BEFORE I started ripping into it!

Like many old pieces, it had a beautiful mahogany veneer on the top, but time had taken it's toll on this one and the veneer had lifted and chipped. Course the edges came right off with little effort...it was the rest of it that took a lot of work!

On these older pieces, the beautiful veneer is usually laid over a pretty decent piece of wood. Like this oak library table my daughter and I refinished, removing the veneer just entails a good steam iron, a scraper and a lot of elbow grease! Always be VERY careful when removing old veneer...scrape WITH the grain and make sure you don't gouge the substructure. And if you are using an iron for a heat source, make sure you put an old rag between the iron and the veneer!

When you remove the veneer, you are going to reveal all the "warts." While the wood is solid and often beautiful, it will probably have a prominent grain and a few knots here and there...embrace it! If you ask me, that is what makes wood beautiful...it's "character."

The back of the cabinet required glue and clamps. Again, ALWAYS make sure your pieces are properly repaired before you start "refinishing." Or honestly, you are wasting your time! In this case, I didn't have much choice since it really did fall apart when I removed the wire that was "clamping" the back two legs together, which was basically holding the entire back in place.

The next chore was repairing the two damaged drawers. Not only was the mahogany veneer chipped and missing, but the "substructure" it was adhered to was missing.

This may seem like a daunting task, and is probably what frightened my neighbor the most, but it is just a little "puzzle." Just recreate a new base by glueing a scrap piece in place and then use wood filler to "sculpt" a new corner...lots of patience and some careful sanding! This may take 2-3 shots to get it right, but it is doable! Since I planned on painting the drawer fronts, it worked perfectly!

After all the repairs were completed and the veneer top was completely removed, I chalk painted and distressed the cabinet and the drawers and applied a walnut stain to the top. I sealed the top with three coats of tung oil finish and the chalk paint with a few coats of spray on poly!

The inside of the top drawers were a bit worn and stained so I gave them a little KTSP treatment with a bright teal!

New porcelain knobs...and OH MY! Beautiful again!

Don't turn your noise up at old, damaged pieces. This piece had three strikes against it, but it was hardly down and out. Yes, it took a little work, but in the end it was well worth the time and effort!

This piece would be perfect for one of those precious French graphics from "The Graphics Fairy," but I think I will let the new owner add their own creative touches!

Another piece ready for another lifetime of use!

Info

5 Comments

Another mid-century dresser makeover...

If you have followed along for any amount of time, you know I have a "thing" for mid-century furniture...and walnut.

I just love the clean lines of the pieces and how sturdy they are. You can not buy furniture today that is as durable and sturdy as many of these 50-60 year old pieces. Well, I guess you can, but you will pay a pretty penny for them!

And walnut? Well, in my opinion, there isn't a more beautiful wood grain out there.

A few months ago I featured a beautiful mid-century dresser I refinished and put in "Mitchell's room." I knew it was a tad big for the room, but I just could not resist.

As strange luck would have it, I was cruising Craigslist and found the matching chest. It just so happens that the people who owned the flea market where I originally purchased the dresser were selling the matching chest. Wow. What are the odds!

I actually ended up paying a tad more for the chest than I did the dresser...and it was in a little rougher shape structurally.

One of the big "boo-boos" on this piece was some pretty substantial chipping on the veneer of the top drawer corners....

Several of the drawers had missing or broken bottom "glides" and one had been VERY poorly repaired! (Hence, THIS rant!) And one of the legs was a little whomper-jomped. (Technical term for loose and wobbly)

I can not stress enough how important it is to make proper repairs. People, wood glue and clamps are your friend! I could do a tutorial a day on properly repairing furniture, but truth be told, there are a billion outstanding tutorials online for every imaginable repair. No, DO NOT use nails to secure dislocated dove joints. No, do not use silicone to try to put a drawer back together. No, do not put sheetrock screws in the leg of a dresser that originally had a bolt and clamp. If you don't know how to properly fix it, GOOGLE IT! (or email me...I love telling people what to do!) Seriously, it isn't hard to repair furniture, but if you do it wrong, I promise it won't last...and all the paint and refinishing you did to make the piece "pretty" will be a waste of time!

So, the first thing I had to do was repair and rebuild a few drawer glides. Then I had to fix the leg which required removing the old bolt, filling the hole with wood and glue and then replacing the bolt. Then I had to figure out what to do with the chipped drawer fronts.

Since I had refinished the drawers on the dresser, I really wanted to refinish this piece to match. Since there is really no good way to "rebuild" veneer and then stain it to match, I decided to remove the damage by creating a little "radius" on the corners. Probably not the best thing to do on a style known for it's clean, straight lines. I contemplated just cutting the corners at a 45 degree angle...but naaaaaa.

My goal was to improve the aesthetics a tad and also prevent further damage to the veneer in the future.

I used a paint can to draw a "radius" on the corner....

...then I used my mouse sander with 220 grit paper to carefully sand away the damage and round the corners. This is what I call "sculpting" a piece and it takes time and patience. When sanding, always start with a very smooth grade of sand paper (220-330) and only use a rougher grit if it is absolutely necessary. And ALWAYS sand with the grain!

Other than the chipping, the veneer was in pretty go shape and still intact. If I had used a rougher grit, I risked chipping or damaging the veneer further.

When it was all said and done, it turned out pretty well.

After making all the repairs, I stripped the top, drawers and legs using 1/2 acetone and 1/2 lacquer thinner and steel wool. I knew I wanted to paint the "cabinet" like I did the dresser, so I taped and papered off everything that was going to be left "natural" and sprayed it will Kilz, sanded smooth, wiped it down with a tack cloth, and sprayed it with my favorite spray paint.

The top, drawer fronts and legs were left natural. I didn't apply a stain because I love the look and color of walnut with nothing but clear oil.

I used the same process I use on all stained or natural wood. First I hit it with 0000 steel wool (always WITH the grain) just to smooth it a bit. Then I applied 3-4 coats of Formby's tung oil finish, rubbing it with 0000 steel wool and a tack cloth between each coat.

In all honestly, I really do not need two large dressers in this room. It is just the "guest room" now. But I really can't part with either of these pieces! They are just too beautiful!

Don't turn your nose up at old pieces that need a little time and attention. In the end, if you do it right, they will be well worth it!

Info

8 Comments

Paint...the easiest way to update a piece!

When I first started this site I posted every day. Seriously. Every. Single. Day.

That's okay when you are trying to catch up on 30 years of DIY projects...but after awhile it gets a tad tiresome. For a time I posted twice a week...very doable and since I usually have 2-3 projects a week in the pipeline, I always have something to share.

But life has gotten pretty busy around here the last few months. Katie's senior year (and all the hoopla that goes with that!) and then she and Matt's graduations....

Matt graduated from the UofA with his master's degree and a week later Katie graduated from high school with "highest honors."  Precious.... — Matt graduated from the UofA with his master's degree and a week later Katie graduated from high school with "highest honors." Precious....

And of course the apartments...seems the work around there hits in tidal waves...not just "waves" but darn near tsunamis. So the last few months I only found time to post about once a week...which means the projects have been piling up in my "blog files."

Right now I have hutch tops-turned-display cabinets, an antique dresser, a mid century dresser, an antique table, a side table, two chairs and much more...all piled up in the garage, finished and ready to share!

Today I thought I would share a few projects to show that a little bit of time and paint can completely change the look of a piece. I've shared similar projects in the past (tons to be exact...just cruise around this site!) but time and again I see people posting on several blog sites questions about "what can I do to make this better"..."help"..."blah, blah, blah.... bitch, bitch."

Dude. Seriously. Go buy a stinking can of paint! It really isn't hard to take a simple, "blah" piece of furniture and turn it into something worth having in your home.

Take this table for example....

...I see little tables like this at thrift stores and auctions for next to nothing. Or maybe your parents or grandparents gave you one when you started furnishing your own home. Solid little tables...usually in mahogany or walnut or even oak. (I have a similar one in my den that I painted and feature here.)

Let's be honest...not real appealing. I think this one sat in my booth for MONTH before I brought it home and gave it a bright chalk paint/distress treatment (My recipe for "chalk/plaster paint"... 2 1/2 TBS of Plaster of Paris, 1 1/2 TBS of water, mixed well then add 1 cup of latex paint)

I stuck it back in my booth and it only lasted a couple of days. Notice I didn't even invest in new hardware...I spray painted the existing handle with off-white paint!

This antique oak buffet was pretty "dated" as well. Again, something you might inherit from a family member or find in a thrift store or on Craigslist for not a lot of money!

(I took the picture after I had removed the mirror in the top piece)

Some people like the antique wood look and these pieces can be beautifully restored if you use this process.

I chose to restore the top since it was solid wood and paint and distress the rest of it....

I changed out the hardware...again, it only lasted a few days.

And another....

Sorry for the picture quality...phone camera!

This empire dresser was, as you can see, a hot mess. Literally falling apart but nothing a little glue and clamps couldn't fix right up.

Which reminds me...I was working on another dresser this week. Seriously people...dove tail joints were not nailed FOR A REASON!!! So don't try to fix them with nails. And silicone is NOT glue...so don't try to fix loose joints with silicone. My point, if you are going to fix something, fix it RIGHT. I spent over an hour just "undoing" someone else's "fix." If you don't know how to fix it right, GOOGLE IT! My daddy didn't teach me everything I needed to know about DIYing...but he did teach me to use my head and use available resources to find out how to do it RIGHT. And he didn't even have the internet!!!

Okay, rant over. So after some "rebuilding" and repairs on this dresser, I chalk painted and distressed it (again, Google it...you'll get around 1,170,000 results on chalk or plaster paint...I'm not kidding...I googled it and that is how many results I got)

The piece had nifty wood knobs...several were missing so I used a few from the buffet. I decided to give them a little facelift so I primed them and sprayed them with light blue spray paint.

I think it lasted a week!

And lastly, a mirror. I have featured a number of mirrors on here. IMO, they are one of the easiest things to update. This wood mirror had some interesting and intricate carvings but it was a bit dated and dark!

I decided to forgo my usual "boring off white" and give it a little pop of color.

For the time being, it is hanging behind the front door in what little "entry way" I have. Not sure I actually love it there but that is where it is...for now....

My point...stop looking at your dated, drab furniture and growling at it. Find some inspiration and roll up your sleeves.

Don't turn your nose up at those "dated" pieces your mom and grandmother want to give you...take them...again, find some inspiration and give them a simple facelift. There are countless super awesome ideas out there for every kind of project!

There are also unlimited tutorials out there on how to repair, paint, refinish, decoupage...if you can imagine it, a tutorial is out there to tell you how to do it!

Info

6 Comments

Walnut MCM dresser makeover...Part 2!

You can see "Part 1" of this makeover here...a tutorial on stripping and oiling these amazing pieces!

Okay, I have to admit...EVERY time I work on one of these walnut pieces, two things happen...I fall madly in love with it and I am reminded of how much I LOVE walnut!

This little table is a prime example!

Solid walnut and an absolute true treasure! It certainly didn't LOOK like a treasure when I brought it home, but with a little time and effort, these pieces can become breathtaking additions to any home decor.

I know painted furniture is ALL the rage right now and I agree whole-heartedly that there is indeed a time and a place for painted furniture. My decorating motto...if you can ENHANCE the piece by painting it, go for it!

Some people aren't real keen on stained furniture...and that is okay. But I believe every decor needs the warmth and beauty of a quality natural wood piece...whether it is a table or chair or whatever! Not every piece needs to be painted and no decor should have ONLY painted furniture. Of course, no decor should have ONLY stained furniture either...even I throw in painted pieces here and there...probably not enough for some people's taste, but I do like to "lighten and brighten" occasionally. I painted my bedroom furniture and my office desk and even the little side table in my den. But you may note one common element on all these pieces...I left a little bit of natural wood! (Wow, looking at these old posts I realize my photography skills have come a long way! Still a ways to go, but definitely better!)

I decided to go with both paint and natural wood finish on this dresser. I like the way the painted "box" seems to frame the wood drawers! In my opinion, the results are A.M.A.Z.I.N.G!

So get ready for a BUNCH of pictures...because I am loving this piece!!!!

As I mention in the first post, the top had some pretty serious ink stains...

With a little "chemical" magic, gone!! When you find yourself faced with wood stains, hit the internet and search for a chemical solution. Trust me, sanding is NOT the answer, especially if you are working with veneer.

Can you even believe that this.....

...could become this. No stain...just a simple strip job and 4 coats of tung oil finish! Walnut in all it's natural glory!

I put this dresser in my oldest son's room. He doesn't actually LIVE here, but he still has a lot of stuff here. His room serves as a guest room and a place to keep all his "stuff." The other kids call it the "museum"...trophies, jerseys, plaques, certificates..high school and college mementos covering pretty much every square inch of the wall space.

Sooooo...it was time. Time for a fresh coat of paint. Time to box up most of the "stuff." Just time.

So later this week I will share his room makeover.

Want to know a little secret? For the first time ever I didn't stress over paint chips trying to pick the perfect paint color. I chose a color that everyone has been raving about on Pinterest and decor blogs. I literally called the paint store and told them to mix up 2 gallons, sight unseen...and I LOVE it!

I can't wait to share!

I am sharing this project with Christine at MustLoveHome.com as well as all my favorite Link Parties!

You can see the full room makeover here!

Info

10 Comments

Ugly laminate dresser before and after...

Like old maple furniture, they are a dime a dozen...old "laminate" furniture. The pieces aren't constructed near as sturdy as the old maple furniture (Here, here and here are a few maple pieces I have featured) but if you have a "boring" old laminate dresser sitting around or if you stumble across one at a thrift store or garage sale for next to nothing, it takes little time and effort to bring them back to life!

Like most of these pieces, the top and sides (basically the "box") were all laminate. The drawer fronts were wood veneer.

What is the difference you ask? Basically, laminate is a "plastic" type material over particle board...then a "grain" is printed on to give it a "wood look." Veneer is generally constructed of a real wood top layer glued onto a wood base. It is pretty easy to tell the difference...if it looks and feels like "plastic" it is probably a laminate...if it looks and feels like real wood (but it is not a solid piece of wood) it is probably a veneer.

The biggest difference for me when redoing one of these pieces is I always prime and paint the laminate...usually spray paint. I use a chalk paint treatment on the veneer because I can "distress" it and the "real" wood grain will peek through.

On this little dresser, both the laminate and veneer were in pretty good shape. Sometimes you will see "chipping" on either the veneer or the laminate. Both are relatively easy to repair. First, scrape away any loose pieces. Apply wood filler with a putty knife and then sand it smooth after it dries.

Since we are in the heart of "Razorback country" I decided to give it a black and red treatment. I thought it would look cute in a boy's room or maybe in someone's "man cave" as a tv console.

Again, super simple transformation. I removed all the drawers and then removed the hardware. Replacing hardware can get real expensive, real fast so I decided to give these little pulls a makeover as well. After I removed the pulls from the drawers, I put the screws back in them and stuck them in some old styrofoam (here is a picture example). I primed them with a metal primer and then I sprayed them with the same spray paint I used on the box.

I sprayed the "box" with Kilz, sanded, tacked and then gave it two coats of red spray paint. I painted the drawers with homemade black chalk paint (two coats) and then distressed them a bit. I sealed all the pieces, including the hardware, with clear spray on poly.

If you have an old dresser like this and need inspiration for color or styling, check out Pinterest. There are sooo many inspiration pieces. Some even remove a few of the drawers and add a shelf in the space so it can be used as an entertainment center for a tv and video equipment. I have done that with an old maple dresser and it turned out super cute and perfect for a living room.

I had the chest that matched this dresser...I painted the "box" off-white and the drawer fronts a pretty tealy blue. I redid it months ago and it is long gone! This poor little guy has languished in my garage for months and was one of the many projects I managed to get completed this week during our little warm spell...along with cleaning out the pond (AGAIN!) and washing exterior windows!

Good thing I got a lot done the last few days because today it feels more like winter again.

Info

2 Comments

Pretty in pink....and a little zebra....

Earlier I posted this "before" picture of a little dresser I brought home from the apartments.....missing a drawer and really not attractive! (I found it, and this one, in the same unit!)

But it was relatively sturdy and I knew I could install a shelf where the drawer was missing...perfect for little decorative baskets! Or books...or whatever!

I never posted a before picture of this chair....and unfortunately, I forgot to take a picture BEFORE I took it all apart. But basically it was just a little gray chair I found at the apartments...kinda nasty as usual and veeeery boring.

Both have been in my garage for months...kilzed and ready to go. What to do, what to do. I just couldn't get "inspired." I don't have a problem doing this stuff, I just have a problem deciding exactly WHAT to do. But the other day I was walking through Hobby Lobby and I saw all this pink and zebra stripe little girl's decor, and I thought "Oh MY!" Inspiration at last. Keep in mind, I have NO place in my home for this but some little girl somewhere is going to love this stuff....

The zebra stripes on the drawer fronts are hand painted. Don't get too impressed. While I have a tad of artisticness and creativeness in me, I'm honestly not THAT talented. Here's a little secret...if you see a design or picture you want to put on a piece of furniture, trace it onto a piece of wax paper. Then place the wax paper on a piece of sewing trace paper and trace it onto your piece. (TIP: use sewing trace paper...it doesn't "smudge" as badly as other traceable papers and the markings are easy to remove with a damp cloth!) You can do this on ANYTHING...walls, glass, furniture, anything!!! I painted the drawers white, traced the fabric design on wax paper and then traced that onto the drawer fronts....then painted them with black latex paint. And with everything, I sprayed it with a clear coat!

You can even print things off the computer and trace that...if the printed picture is too small for the project you are working on, just take the picture into any edit program and break it up in sections that can be printed off and then taped together. If it is REALLY big, you can always project it onto the object with a projector. We did that with a mural on my daughter's wall...if she EVER gets her room clean enough for me to take pictures, I will share her mural...totally awesome. Ever hear of a "fail whale?" Google it...it really is awesome!!

Anywho....animal print is not really my cup of tea...evident by the fact that I pretty much hated my bathroom when I decorated with "leopard print" in a failed attempt to decorate around my ugly gold shower doors!

But after seeing a little inspiration and how "fun" it can be, this was a fun little project.

Info

Comment

Before and After dresser....

Yesterday Brian and I took off and went trout fishing for the day! OH MY! I am sore and sunburned...and I loved every minute of it! Sometimes you just have to say to heck with the yard work and go have a little fun! Awesome day with my best friend!

But Saturday was a busy day. My neighbors came over to show off their new grandson and I found a perfect home for a precious little dresser I have been working on! Just so happens they NEED a dresser and I NEED to find it a good home. Done!

As you can see, it was missing a drawer so I added a shelf...perfect spot for little storage baskets. I painted the "box" white, the drawers a pretty green and stained the top with my favorite java gel stain. I originally put little crystal knobs on the drawers, certain it would go to a little girl, but when I found out it was going into a boy's room I changed the knobs to brush nickle...just thought it was more appropriate for a little boy! And I am going to throw in a cute little cork board I made up and featured earlier!

The great thing about these little dressers is the fact that as the little boys grows, the drawers will be easy to paint to match any decor!

Another "trash to treasure"...a piece of furniture destined for the dumpster but given new life and new home with just a little time and attention!

Info

1 Comment

A new "before and after" by SIS....

Man oh man...what a difference a day...or just a few hours...can make in NW Arkansas. Beautiful and warm this morning and now it is too cold to even work on my dressers. Suppose to be in the 40s tomorrow, with a chance of snow...craziness!

Anywho, since I can't project outside and I really don't want to do what I NEED to do IN the house because of this "spring fever" bug I have, I thought I would share one of Sister Sarah's projects. As I have mentioned, Sarah (my oldest daughter) likes to "project" but with two active boys it is tough. I remember (and MISS) those days!! That time in your life when you want to be in the garage sanding and painting, but while you are doing that your youngest is locking himself in the dryer or taste-testing your sleeping pills (yes, that would be my youngest grandson!)

But she does manage to get in a project or two...so I thought I would share this darling little nightstand she did...

See how a little Kilz and a little paint can make a world of difference!

Great job Sis!!!

She also used the gel stain I told you about on her bathroom vanity and wall cabinet (see here)...totally awesome transformation.

Info

Comment

Dressing up an old dresser....

I'm tryin' here! Smarmy comes easy..."witty"...not so much!

But it dawned on me....I have never posted my dresser makeover!

I use to have this HUGE hulking dresser in my office/dressing room. It was a "matchy-matchy" to my bed and highboy...which I love, but the dresser was seriously huge and just seemed to shrink the entire room. So when I was out digging around for the desk (featured earlier) I found this sweet little dresser and said to myself "Why not!"

I LOVE the style.....kind of a mid-century modern with walnut veneer. The top was laminate, so I knew I was going to have to paint the entire thing...and I did. But later I found a picture online of an identical dresser and they had painted the top and sides, but refinished the wood veneer drawers...GORGEOUS! And you know how I loooove anything wood, especially walnut! Live and learn...maybe next time!

As with most of my furniture, I had a piece of glass cut for the top...lets me clean it with Windex!