Another mid-century dresser makeover...

If you have followed along for any amount of time, you know I have a "thing" for mid-century furniture...and walnut.

I just love the clean lines of the pieces and how sturdy they are. You can not buy furniture today that is as durable and sturdy as many of these 50-60 year old pieces. Well, I guess you can, but you will pay a pretty penny for them!

And walnut? Well, in my opinion, there isn't a more beautiful wood grain out there.

A few months ago I featured a beautiful mid-century dresser I refinished and put in "Mitchell's room." I knew it was a tad big for the room, but I just could not resist.

As strange luck would have it, I was cruising Craigslist and found the matching chest. It just so happens that the people who owned the flea market where I originally purchased the dresser were selling the matching chest. Wow. What are the odds!

I actually ended up paying a tad more for the chest than I did the dresser...and it was in a little rougher shape structurally.

One of the big "boo-boos" on this piece was some pretty substantial chipping on the veneer of the top drawer corners....

Several of the drawers had missing or broken bottom "glides" and one had been VERY poorly repaired! (Hence, THIS rant!) And one of the legs was a little whomper-jomped. (Technical term for loose and wobbly)

I can not stress enough how important it is to make proper repairs. People, wood glue and clamps are your friend! I could do a tutorial a day on properly repairing furniture, but truth be told, there are a billion outstanding tutorials online for every imaginable repair. No, DO NOT use nails to secure dislocated dove joints. No, do not use silicone to try to put a drawer back together. No, do not put sheetrock screws in the leg of a dresser that originally had a bolt and clamp. If you don't know how to properly fix it, GOOGLE IT! (or email me...I love telling people what to do!) Seriously, it isn't hard to repair furniture, but if you do it wrong, I promise it won't last...and all the paint and refinishing you did to make the piece "pretty" will be a waste of time!

So, the first thing I had to do was repair and rebuild a few drawer glides. Then I had to fix the leg which required removing the old bolt, filling the hole with wood and glue and then replacing the bolt. Then I had to figure out what to do with the chipped drawer fronts.

Since I had refinished the drawers on the dresser, I really wanted to refinish this piece to match. Since there is really no good way to "rebuild" veneer and then stain it to match, I decided to remove the damage by creating a little "radius" on the corners. Probably not the best thing to do on a style known for it's clean, straight lines. I contemplated just cutting the corners at a 45 degree angle...but naaaaaa.

My goal was to improve the aesthetics a tad and also prevent further damage to the veneer in the future.

I used a paint can to draw a "radius" on the corner....

...then I used my mouse sander with 220 grit paper to carefully sand away the damage and round the corners. This is what I call "sculpting" a piece and it takes time and patience. When sanding, always start with a very smooth grade of sand paper (220-330) and only use a rougher grit if it is absolutely necessary. And ALWAYS sand with the grain!

Other than the chipping, the veneer was in pretty go shape and still intact. If I had used a rougher grit, I risked chipping or damaging the veneer further.

When it was all said and done, it turned out pretty well.

After making all the repairs, I stripped the top, drawers and legs using 1/2 acetone and 1/2 lacquer thinner and steel wool. I knew I wanted to paint the "cabinet" like I did the dresser, so I taped and papered off everything that was going to be left "natural" and sprayed it will Kilz, sanded smooth, wiped it down with a tack cloth, and sprayed it with my favorite spray paint.

The top, drawer fronts and legs were left natural. I didn't apply a stain because I love the look and color of walnut with nothing but clear oil.

I used the same process I use on all stained or natural wood. First I hit it with 0000 steel wool (always WITH the grain) just to smooth it a bit. Then I applied 3-4 coats of Formby's tung oil finish, rubbing it with 0000 steel wool and a tack cloth between each coat.

In all honestly, I really do not need two large dressers in this room. It is just the "guest room" now. But I really can't part with either of these pieces! They are just too beautiful!

Don't turn your nose up at old pieces that need a little time and attention. In the end, if you do it right, they will be well worth it!

Info

8 Comments

The den makeover reveal...

Honestly, on the surface it doesn't look like much of a reveal.

I had plans...BIG plans. New couch and rug, paint, new flooring, fireplace makeover...teal, greys, whites.

I found my inspiration, made a plan and started the plan.

When it was all said and done, it really doesn't look like I have changed much. My back and checking account say otherwise!!!!

Two huge projects did get completed. I painted and refaced the fireplace with travertine tile...

....and installed new wood flooring!

A little TIP for wood or laminate flooring. This is an "engineered wood flooring" you glue down. The transition pieces for this flooring were about $50 for a 6' stick, and I need three pieces! I went to Lowes and found unfinished transition pieces for around $15 a stick and stained them to match the flooring. Much cheaper! When I did my master bedroom floors in laminate, I did the same with the existing transition pieces...just gel stained them to match the new flooring!

Those two projects alone made a world of difference!

I did what I always do when looking for the perfect paint color ...I painted two samples on the wall and looked at it...for weeks.

But when it came right down to it, even with the new flooring, I really love the original color. This is my "fall room." Fall is my favorite time of the year and I just love the colors associated with the season...burnt reds, oranges, yellows, etc!

So off to Sherwin Williams I went to see if they could mix a 15 year old color. God bless 'em...they mixed it right up. I painted over the "test patches" and gave the entire wall a fresh coat of the same exact original color.

I did infuse a few splashes of "teal" here and there. It all started with these little birdies I picked up at Midtown several months ago...

I THOUGHT I would like this table in teal...

Boy was I wrong....I really disliked it so when I cleared out the furniture to install the flooring, it went straight to the garage for another makeover...

I originally painted these candle sticks teal...nope, not happening. So again, back to the garage for a second makeover.

I did paint this lamp a soft "teal."

It's not really "my style" but it is different and I like that. And the shade is actually brass with a black exterior. I got a great deal on it at a design studio auction. It had the original $450 price tag on it. A little pricey even for a heavy brass lamp...but for my $15 bid it was worth it! Believe it or not, you can paint brass!! A little metal primer and a little spray paint!

After dinner with my super awesome girlfriends, we made our usual TJMaxx run! I found these awesome pillows and decided they will look perfect on the grey couch I want to eventually get for this room...eventually...someday.

Not sure they are "all that" on the old yellow couch, but they will inspire me to eventually "transition" this room into the vision I had in the beginning...greys, teal, whites. For now, I will leave the original pillows...they have a little bit of teal in them...just for the sake of the ratty old couch!

Not all "makeovers" happen over night. Sometimes, you have to take your time and do what your back and budget allow.

So yes, I still want to buy a new couch...and a new rug...a few new club chairs.

In time. For now, I will just enjoy the new floors and the "new" fireplace!

Info

4 Comments

Ugly laminate dresser before and after...

Like old maple furniture, they are a dime a dozen...old "laminate" furniture. The pieces aren't constructed near as sturdy as the old maple furniture (Here, here and here are a few maple pieces I have featured) but if you have a "boring" old laminate dresser sitting around or if you stumble across one at a thrift store or garage sale for next to nothing, it takes little time and effort to bring them back to life!

Like most of these pieces, the top and sides (basically the "box") were all laminate. The drawer fronts were wood veneer.

What is the difference you ask? Basically, laminate is a "plastic" type material over particle board...then a "grain" is printed on to give it a "wood look." Veneer is generally constructed of a real wood top layer glued onto a wood base. It is pretty easy to tell the difference...if it looks and feels like "plastic" it is probably a laminate...if it looks and feels like real wood (but it is not a solid piece of wood) it is probably a veneer.

The biggest difference for me when redoing one of these pieces is I always prime and paint the laminate...usually spray paint. I use a chalk paint treatment on the veneer because I can "distress" it and the "real" wood grain will peek through.

On this little dresser, both the laminate and veneer were in pretty good shape. Sometimes you will see "chipping" on either the veneer or the laminate. Both are relatively easy to repair. First, scrape away any loose pieces. Apply wood filler with a putty knife and then sand it smooth after it dries.

Since we are in the heart of "Razorback country" I decided to give it a black and red treatment. I thought it would look cute in a boy's room or maybe in someone's "man cave" as a tv console.

Again, super simple transformation. I removed all the drawers and then removed the hardware. Replacing hardware can get real expensive, real fast so I decided to give these little pulls a makeover as well. After I removed the pulls from the drawers, I put the screws back in them and stuck them in some old styrofoam (here is a picture example). I primed them with a metal primer and then I sprayed them with the same spray paint I used on the box.

I sprayed the "box" with Kilz, sanded, tacked and then gave it two coats of red spray paint. I painted the drawers with homemade black chalk paint (two coats) and then distressed them a bit. I sealed all the pieces, including the hardware, with clear spray on poly.

If you have an old dresser like this and need inspiration for color or styling, check out Pinterest. There are sooo many inspiration pieces. Some even remove a few of the drawers and add a shelf in the space so it can be used as an entertainment center for a tv and video equipment. I have done that with an old maple dresser and it turned out super cute and perfect for a living room.

I had the chest that matched this dresser...I painted the "box" off-white and the drawer fronts a pretty tealy blue. I redid it months ago and it is long gone! This poor little guy has languished in my garage for months and was one of the many projects I managed to get completed this week during our little warm spell...along with cleaning out the pond (AGAIN!) and washing exterior windows!

Good thing I got a lot done the last few days because today it feels more like winter again.

Info

2 Comments

The most AMAZING steak EVER!

This is the perfect time of the year to cook the most AMAZING steak ever! A little too cold to grill, but after years of doing it "wrong" I have found the RIGHT way to cook the perfect steak...

Head over to my "Cooking 101" page and check out this recipe.

Trust me, you will never fire up your grill for steaks again!

Info

Comment

Simple Christmas gift!

These cute little coasters aren't "Christmasy" but they would make awesome, inexpensive gifts...and you are ONLY limited by your imagination. You could use favorite family photos, holiday graphics from The Graphics Fairy...maybe tickets stubs from your favorite concert or movie...old letters or stamps...or anything that can be copied or printed onto paper!!! These would make awesome teachers or hostess gifts...or even stocking stuffers!

As I mention here, I am horrible about using coasters...as a result, my bedside table was in pretty bad shape from the beating it took from my nightly glass of water and morning coffee cup!

After finding and refinishing this walnut table treasure, I knew I needed to do something to protect the top. I had a piece of glass cut to protect the old Duncan Phyfe table, but I honestly didn't want to cover this table with glass.

Pinterest to the rescue! I saw some really darling personalized coasters on Pinterest and I knew exactly what I wanted to do! (Did I bother to pin it so I would have a "link"...no!)

Brian and I love to fly fish and I decided to make "map coasters" of a few of our favorite fishing spots in Colorado and Arkansas.

I picked up a few pieces of ceramic 4 x 4 tile at Habitat (.10 each!). I found a few old maps in my closet and used the tile to trace the area I wanted to cut out....

I used a 2" chip brush to coat the top of the tile with Modge Podge....

...and carefully placed the cutout map on the tile and then brushed the top with more Modge Podge.

The map paper was a tad flimsy and wanted to "crinkle" and bubble. I used my finger to smooth it out and then brushed it with the Modge Podge again! After letting the MP dry per the directions, I sprayed 2-3 coats of poly on the top just for good measure!

After the poly dried, I cut a piece of "felt blanket" to fit and used hot glue to secure it to the back of the tile. You could use cork board as well!

There you go...a simple little project that can be personalized to your heart's content! I had honestly intended to make some "Christmasy" coasters for the holidays but "crafting" isn't something I have a whole lot of time for during the holiday season! You could make one for every holiday...Valentine's Day, the 4th of July, Halloween. This is a simple, inexpensive little project that would be easy and fun for kids as well!

Info

Comment

Christmas pillows....

One of the great things about the "blogoshere" is all the great inspiration AND motivation!

This past week I was reading one of my favorite blogs, "The Interior Frugalista", and Marie was sharing her snowflake decorative pillows...only she calls them "toss cushions." Gotta love those Canadians...lol!

Anywho, it not only inspired me, it motivated me to do something I seriously dislike doing...sew!

I have been scavenging down pillow forms. I wanted down forms for the decorative pillows that have poly-fill and a few extras for some holiday pillows!

As I mentioned before I like down forms because they are more comfortable and have a "designer" look! To me they just look "rich" but their price tag can reflect that and it is difficult for me to fork over twenty bucks for something I am going to have to make a cover for and something that is nothing more than a "doo-dad."

This past week I found 6 awesome down pillow forms, in varying sizes, ALL for under $7...a few for as cheap as $5. Thrift stores and flea markets. Yep...I am buying ugly old designer pillows, removing the cover and sanitizing the forms for reuse! (just toss them in a hot dryer with a dryer sheet!)

Since I had all these forms piled up, I knew it was time to drag out the old sewing cart and get busy!

TIP: If you have a 18 x 18 pillow form, you may be tempted to cut your cover fabric 19 x 19 to allow for the seams. DON'T. Cut the fabric 18 x 18...your cover will be about 1" smaller than the actual pillow form, but that is what will make them look super "puffy" and "full." I read that once on a designer website (no source, just info stored in the back of my brain!) and I tried it...makes a huge difference!

I have shared "pillow tutorials" on several posts in the past (you will note I advocated cutting your cover fabric larger back then...again, don't)...you can check them out here, here, here, and here.

There is no sense in rehashing the "how to." I've provided a tutorial and there are "how to" tutorials all over the internet. Marie does a great job of "tutorialing." (As I have said before, if you can sew a straight stitch, you can sew a decorative pillow...if you can't, now is the time to learn.)

So I am going to share just to provide inspiration AND motivation and give you a few little tips on where you can find material to make inexpensive holiday covers.

My first "inspiration" came from a Pottery Barn knock-off I found on Pinterest....

This little pillow was super simple to make. I used two pillow shams that came with a white bedspread I ordered to put over my down comforter for the winter. I was never going to use them on the bed, so I decided to use the fabric for my decorative pillows. I didn't have enough for the back, so I used the leftover fabric from the tea towel pillows I will share in a bit....

As you can see, I changed things up from the "inspiration" pillow. I used green sparkly felt and rhinestones...both of which you can buy at your local craft store. I cut a bunch of "leaves" from the green felt, and used a bowl to guestimate a circle...

Then it was just a matter of filling in the "wreath" and placing a few rhinestones here and there...basically, I eyeballed it! I used fabric glue on the green leaves and "Jewel It" glue on the rhinestones and let it sit overnight before I constructed the pillow. I used a "premade" silver bias tape for the piping!

I made this pillow out of tea towels I picked up at Hobby Lobby...

....they were around $4.50 (50% off!) for two!

One set of towels made TWO pillow covers and I used the leftover fabric for the backs of the wreath pillow! I spruced it up a bit by placing a rhinestone in the middle of each of the snowflakes and added a little piping around the edge. The piping is made out of bias tape and you can find a tutorial here on how to make inexpensive decorative piping from bias tape!

I made two pillows with this snowflake cutout table runner and a white table cloth I bought at TJ Maxx. (I would not suggest using inexpensive tablecloths for pillow projects...just seems too "thin" and tends to ravel quite a bit. Lesson learned.)

I centered the runner on the piece of fabric I cut out for the front of the pillow and basted the top and bottom to it with my machine to keep it in place. After I basted it, I used the fabric glue around the edges of the cutout to keep it "flat."

Again, I glued a rhinestone in the middle of each snowflake. I just love "sparkle!"

After making two white snowflake pillows, I had enough of the snowflake cutout to make one more pillow. I picked up a "burnt red" pillow and I kind of liked the color so I deconstructed it, made it a tad smaller so the pillow would be fuller and added the white snowflake cutout material.

I only have one, but I think it will look great in the den where I have more "fall" colors year round!

I also put zippers on all these pillow covers so I can easily remove them and reuse the forms!

I tend to be an "OCD/symmetry" kinda person so I made two of each of the decorative pillows so I will have one for each end of the couch when it is time to decorate for Christmas.

All these pillows are 18 x 18 and honestly, I don't like the three lined up together. I found two smaller pillow forms and plan on making Christmas covers for them and using one with two of the 18" pillows on each end of the sofa...maybe...someday...IF I get a little more motivation in the future!

While I was making a mess, I decided to make another "floor pillow" for the den. I had two large poly-fill forms (actually they were Euro-pillows with ugly covers!) I bought at an estate sale and I thought they would be perfect to toss around on the den floor for tv watching! I had already made one large toss pillow and two smaller decorative pillows out of some leftover fabric from my dining chair project.

I used the drop cloth material leftover from this chair project and an iron on graphic from The Graphic Fairy. Since the pillow was fairly large, I decided I wanted the graphic to be bigger so I pulled it up in Adobe Photoshop, enlarged it and then printed it out on four sheets of iron-on transfer paper. Then it was just a matter of piecing the graphic together and ironing it on the fabric. There was a little "line" where two of the pages didn't quite fit together perfectly...I used a Sharpie to fill it in a tad.

I removed the "Grain" wording on banner in Photoshop and had intended to replace it with "Love Life." But I had a few issues with my printer so I ran out of transfer paper. Since I put zippers on all my pillow covers, I will just remove the cover and iron on the new words when my order of paper comes in.

I still haven't shared my fall decor. Truthfully, it hasn't changed a whole lot from last year. But I have a few little additions and I thought it would be fun to do an entire post about the fall decor and update my Holiday Decor pictures. After all, Thanksgiving is less than three weeks away and the day after Thanksgiving, it all goes back in the attic! If you see anything that "inspires" you, it will be the PERFECT time to snag fall decor for pennies on the dollar!!! You may have to wait til next year to use it, but it is always fun to find things you forgot you bought last year!

So this week...I promise!

Info

6 Comments

MY beef bourguignon....just as good and easier!

Over a year ago, I posted "my spin" on Julia Child's classic beef bourguignon recipe. I didn't post the actual recipe because you can pretty much Google it and find it...I just did a little "tutorial" on how I "tweeked" the original recipe.

Today I thought I would post my actual recipe, along with my commentary of what I do and why I do it. Julia's version is to die for...and just once in your life, you really should tackle it! But it is not an easy recipe to throw together for busy mom's.

My version is more of a glorified "pot roast" recipe, retaining most of her key elements and in my opinion just as yummy. It has become a family favorite!

Ingredients:

2 1/2 - 3 lb. pot/chuck roast

6-8 ounces of bacon

2-3 cups of mushrooms

1-2 cups of chopped Carrots

8-10 Pearl onions or regular chopped onion

Garlic

Olive Oil (regular cooking oil will work)

2 cans of beef broth/consomme

1 tablespoon tomato paste

2-3 cups red wine

Flour

Spices: salt, pepper, rosemary, bay leaf...or whatever YOU like!

Remember, I am a "pinch of this, toss of that" kinda cook. So follow along and feel free to "pinch and toss" to your own tastes! Or even eliminate anything you don't care for!

Bacon....10 or so slices, sliced into chunks. I use thick cut...just a preference!

Fry the bacon in a large skillet. When it is fairly done, add....

2-3 tablespoons of olive oil (or plain cooking oil) and 2-3 tablespoons of butter

1-2 cups of chopped carrots

2-3 cups of sliced mushrooms

8-10 peeled pearl onions, cut in half...or 1/2 regular onion, chopped.

2-3 gloves of chopped garlic or 3-4 tablespoons of chopped garlic from the jar (my go to!)

Sautee all this until everything seems kind of "tender."

Remove all the veggies and bacon with a slotted spoon, draining the oil back into the skilled, and put them in your "roast pan."

Leave the "oil" in the skillet. Add a tad if you need to!

Cut the 2 1/2-3 lb chuck roast into 1" cubes (if you are a venison eater....gag...this would be a great use for venison roasts) Pat it with a paper towel to dry it off.

In a bowl, mix about 5-6 tablespoons of flour with about 1 teaspoon of both salt and pepper. Coat all the chunks of roast with the flour. Brown all sides of the roast cubes in the oil.

Place all the browned roast cubes, bacon and veggies in a dutch oven...or cast iron pot...or large casserole dish...whatever you have that you cook pot roast in!

Now, this is how I get ALL the flavor out of the pan and make it easier to clean it up. I pour 1 can of beef broth/consumme (Campbell's is fine!) (or use 1 cup of water) in the pan drippings, bring it to a rapid boil, scrapping the sides and bottom. After everything is off the bottom and sides, pour this little mixture over the meat and veggies!

In a large bowl, mix the other can of beef broth/consumme and heaping tablespoon of tomato paste (you can freeze left over tomato paste so you don't waste a whole can!) Throw in whatever spices you might like...salt, pepper, rosemary, thyme, parsley, bay leaf...whatever YOU like!

I am a salt freak! But I would advise going low on the salt for the time being...there is a lot of salt in the consumme...and soooo much flavor in all the ingredients!

Pour about 1/2 bottle of RED wine into the broth mixture...maybe 2-3 cups. The actual alcohol will "cook out" as this dish cooks so you are NOT serving your family alcohol...just the wine flavor! I buy the cheapest bottle of red wine I can find at the grocery store!

Pour the broth/wine mixture over the roast and veggies. Top with just enough water to barely cover everything, if needed. Cover and bake for about 4-5 hours in a 325 degree oven. You can "peek" once, just to give it a quick stir and check the liquid...otherwise, leave it be!

I serve this with mash potatoes (YUM!) or noodles or rice...whatever you want!

If you compare this to Julia's, it is indeed different...but the flavor is just as good in my book! And soooo much easier to prepare!

Again, this would be a great recipe for venison or any other "game" meat, like elk. I think it would even be good with pork, but have never tried it.

I would think you could cook this in a crockpot. I haven't but plan to in the future. Let me know if you try it and how it turns out!

Again, JUST ONCE you should try the Julia recipe...if for no other reason than to say you have done it...but when you are scratching your head wondering what the heck a "lardon" is or where to buy it, don't call me...I still don't have a clue!

Info

2 Comments

Flagstone....check!

That is one project I can check off my "to do" list! It is done...the project I started here. It took three trips to the "rock store" and two trips to Meek's for sand...and two trips to Lowe's for topsoil. But whatever...it is DONE!!!

Well, until it "settles." Seems no matter how well you pack the sand base, a few rocks always "sink" after a little rain and wear. No biggy...just pull it up, put a little sand under it and then reset it.

We had a 90% chance of rain Thursday (didn't happen!) so I wanted to get this project finished so the sand wouldn't wash away and the rock could begin "settling."

I had a bench sitting in one of my flower beds in the side yard...thought it would look great in the corner. The terracotta pot is one I bought at an auction last year and was just sitting around. I decided it would look better with a few plants!

This is another area that still needs a little "something." In time...for now, I LOVE, LOVE, LOVE IT!!

Get ready for a BUNCH of pictures!!!

Again, there are hundreds of tutorials online for laying flagstone...it may seem laborious, but it really isn't that difficult and you won't regret it!

I will offer a few little "tips" for laying flagstone. Make sure you have a good sand base, well packed. After your rock is down, water the sand and rock well so the sand will wash down under the rock. After that, dump a mix of top soil and sand on top of the rock and sweep it into the joints. Then lightly water it again. Rain may wash it away a tad the first few times, so you may have to add a little more sand and soil over time....just dump the soil and sand on the rocks and sweep...eventually it will pack and stay put.

If a rock "sinks," lift it up (just pry it up with hammer), toss a little more sand under the rock to build it up and level it out, reset the rock and then fill the joint with the sand and soil mixture.

I have a tiny front porch and I love how this has opened up the front of the house a bit! It's still not that wrap around front porch I want, but it is a lot better than it was before! It eliminates an eye sore AND the need to crawl around every year filling it with plants! I just plant the pots and I'm done! Super simple to maintain!

I use to decorate the front of the house in the fall with hay bales, corn stalks, pumpkins and scarecrows. I quit doing it because I had to deal with mildewy hay bales after Thanksgiving...but I may have to start it again this year...this area would just be too cute with all the "harvest" decor!

Hum...guess we will see...fall will be here before you know it!

Info

9 Comments

Bedroom makeover...part 2? 3?

I don't know how many times I have griped about my master bedroom. So this past month I began chewing away at a few little things I dislike.

It is my favorite room in the house AND my least favorite. My favorite because it is an awesome room...big, bright, cozy. Least favorite because after 13 years, I STILL haven't decorated it the way I REALLY want it.

I blame it on the furniture.

Ornate, heavy, dark, veeeery traditional! I paid entirely too much for it, so I can't bring myself to get rid of it. One bad thing about furniture...no matter how much you paid for it, chances are you are only going to get pennies on the dollar.

There are a few pieces I would never get rid of...my dad's walnut chair and my grandparent's old trunk. The rest of it...honestly, if I had unlimited funds, it would all go.

But I don't...so it won't. The next best thing is to change it up a bit with a little bit of paint!

I featured the beside tables and the high boy here!

The next big project was the bed!

Honestly, this set would be perfect for a chalkpaint and distress treatment. I painted it with Kilz and sanded it and it was so cool looking. But alas, that is not my "thang" so I just went with my go-to Valspar Dune color.

I did finally paint the top of the Duncan Phyfe drum table...bye, bye beautiful mahogany!

I still need to do some kind of little vingette around this table...in time!

I'm not real thrilled with the bed. I had originally planned on painting all the raised part of the head board and just leaving the inset stained but Brian talked me into just painting the top scrolly part...which is really the part I disliked and it seems the paint just highlighted it. (See, I take his advise!) Oh well...it is different and that will do for now!

I also picked up this darling little antique fan at an auction. I'm not really into "froo-froo" stuff just sitting around and eventually it will probably go to one of my flea booths. But I like the color and retro style and it looks kinda cool on top of the highboy...for now! Until I have to dust it!

Now that all the furniture is painted, I REALLY want to install hand-scraped laminate flooring. And I really want to reupholstery the big chairs. Someday!

I found this AWESOME color chart on Pinterest....

I have some white and tan in the throw pillows and bedding but the majority of my white is a little more "off-white" and my walls are more of a "cream" than a tan. I can live without the grey...I like black better. But the blue is the color of my fireplace wall and I am itching to throw the cranberry color in there somewhere. Maybe in the upholstery on the chairs or a large rug on my new floors!

The paddle fans? Hum...might have to do a little a little paddle fan treatment!

So much I WANT to do.

That is one thing one has to understand about home decor. Unless you have A LOT of money and can afford to have a professional designer come in and do it top to bottom (my choice would be Candice Olson!) the best approach is a little bit at a time.

Don't be afraid to buy used and do a little work to make it your own. As much as I disliked this furniture when it was all stained and matchy-matchy, I'm kind of digging it now! Still want something different, but I like it a lot more now than I did two weeks ago! The floors will come in time and I know someday a piece of upholstery fabric for the chairs will "speak to me" ...someday.

I always tell my kids...it's a good thing we don't have a lot of money...think of all the great things we would never have learned to do had we had the money to pay someone else to do it!

Seriously how much personal satisfaction could one get from having a bazillion dollars and being able to design, built and decorate your "dream" house without concern for costs?

See what paint fumes do to you....

Info

15 Comments

Precious little metal "ice cream" chairs before and after!

I bought these pathetic little chairs at an auction last fall....

...neglected for who-knows how many years in an old outbuilding. Rusted, rotten...so sad.

Then they were neglected for months in my garage because of the "rust issue" I just had no desire to tackle. But I did...and truthfully, it is not that big of a deal (check out how to deal with rust here)....

Then they sat in my garage for ANOTHER month.

They are so darling and I knew I wanted to do something bright and fun with them...I just didn't know what. I get serious mental blocks on upholstery projects!

(I can always tell how long a "project" has been around just by the grass...in the "before" pictures my bermuda is dormant...now it is lush and green and needs to be mowed twice a week!)

So I went to the fabric store and found the brightest and most colorful fabric I could find!

Red for the frame...red is cheerful and fun and since the fabric had every color imaginable, it was perfect!

After dealing with the rust and giving them a good dose of primer (and of course the primer had to cure for a month while I mulled over colors), I sprayed the frames with red spray paint. I cut new seats and backs out of 3/8" plywood and covered them with new batting and the bright fabric .

Here is a little hint...if the "frame" where the back goes is 11", do not cut a new board 11", cover it with new fabric and batting, and expect it to fit. It won't.

The big button (almost) dead center in the flower was a fluke! The original back had a big button and I knew I wanted a button.

So this gives me the perfect opportunity to share how to make buttons for any project...chairs, pillows, headboards! Anything that has or needs a button...you can MAKE one out of any fabric!

Just buy a button kit...they have them at the fabric stores and most hobby stores. There is a template on the back for the fabric cutout and they come in all different sizes....

They are super easy to make! Just follow the directions on the back of the package!

TIP...put a dab of hot glue on the back of the front of the button before you hammer the back on and then put a dab of hot glue on the little U hook on the back of the button. A few times the back has separated from the front or the little U hook has come off the back...the glue just reinforces them a bit!

To attach the button, I measured and located the center of the board, drilled two small holes, threaded wax covered string on a large upholstery needle from back to front, through the front padding and fabric, slipped the button on the string, then threaded it back through and tied it off. Then I put a little dab of hot glue on the knot. Super simple!

I padded the back with a little batting and covered it with red fabric!

I love these little chairs...if I had somewhere to put them, I would keep them! Darling!

When I step outside my comfort zone and go with bright and colorful, I am never disappointed...maybe I should take that into consideration next time I makeover something I intend to keep!

And here is a little "upcycle" hint. I had an old outdoor chair cushion that was thrown in a pile of things I picked up at an auction. The fabric was crud but the batting inside was good. I took the fabric off and used the batting that was inside for this chair and saved the rest for future projects. Free padding!

Info

10 Comments