Little oak side table....

I am so bummed. I really wanted to share my little laundry room door project I mentioned last week. The only thing holding me up is the glass. I called and the glass came in, but it was wrong. DANG IT!!!

So today I am just going to share a simple little table.

One of the reasons I needed a flea market space was because I was always finding cool little pieces at my apartments. I would haul home a table or dresser or chair and give it a cute little make over...and then give it away!

I don't mind giving things away to friends and family...but after awhile I did have to come to terms with the fact that I was spending money (not to mention a lot of time) on these little makeovers...so the "rehab to resell" became a necessity. That, and I tend to haul home A LOT of little goodies from auctions and as I have said before, if I didn't have the flea market outlet (and wasn't a tad OCD) I could easily become a hoarder.

I love auctions...and I love restoring furniture. What can I say!

Anywho, I found this little solid oak table in an apartment. It was super sturdy and had already been stripped so it really just needed a little TLC.

I did scrub the top with my acetone/lacquer thinner mixture just to clean it up a bit. Then I stained the top with a walnut stain and applied 3 coats of tung oil finish. After that cured well, I taped and papered off the top and gave the bottom a KSTP treatment. (For those who are new, that is Kilz/sand/tack cloth/paint. I used my current favorite Valspar teal color.

New life for an old, abandoned table destined for the dumpster. Now it is a perfect little side table for the living room or even a bedside table.

Looking back at all the projects I have shared, it is easy to see that I still struggle with painting EVERYTHING....seems I almost always try to preserve a little "natural wood" if I can. Personally, I think the paint "updates" the piece and the stained wood gives it warmth. I am working on a desk and a fireplace surround right now and both have stained tops and painted bases....guess that's just my thang!

Hopefully the RIGHT glass will come in this week and I can share my door next week! I can't wait...it's going to be awesome!!!

In the meantime, pull your least favorite piece of furniture into the garage or yard and give it a little KSTP treatment...trust me...you're gonna love it!

Info

2 Comments

Bedside table makeover....

I spent several days this week projecting on a few pieces I picked up at auctions, as well as a little project here at the house.

I can't wait to share the home project...but I will have to. Even veteran DIYers flub every blue moon! In this case, I neglected to get a quote and delivery time frame on a "simple" piece of glass. Let's just say one should not fall in love with something if they have no idea how much it REALLY cost. I should know better...but by the time I called and got an estimate, it was too late. The vision was set and the damage was done!

I will have to wait until next week to share this AWESOME project....and in the meantime I will have to live with a big hole in my utility room door...stay tuned! (no it is not a doggy door!)

So this week I will share one of the little projects I managed to get done. I usually wait until I have 3-4 pieces to work on before I drag out the stripper and paint! Normally it is easier but it is just soooo hot! Working all day in the garage can really be draining!

Last week I bought these two little bedside tables at an auction.

Dark, dated and the drawers were a little wonky. But overall they were in pretty sound shape.

The drawers were an easy fix...the metal glides were a tad bent so I took a pair of pliers and straightened them out...perfect.

Usually I paint the tops of these pieces, but this time I decided to try stripping them...what harm could be done? Sure enough, the old poly finish just melted off (using this process!) leaving a beautiful wood veneer top perfect for a little walnut stain and tung oil finish.

I painted the existing brass hardware with a gold metallic paint. I gave the drawers a little KSTP treatment with a pretty "teal" spray paint, chalk painted the cabinets and distressed them a bit before sealing with a spray poly.

Cute as a bug's ear!!!!

These little tables fit perfectly in my commitment to stay "small." They still take a little time and energy, but they are MUCH easier to move around than the bigger pieces!

And this is just ANOTHER example of how you can take a dark, dated, wonky piece of furniture and give it new life!!!

Info

2 Comments

It is time to scale down!!!!

I have made some hard decisions regarding the direction of my "rehab for resale" projecting. For years I have tackled anything and everything...large buffets and china hutches and major upholstery projects Pieces like this that I didn't even take decent pictures of and share!

I made little chalkboards out of the doors!!!

These pieces are big and bulky and take a lot of time and muscle.

Upholstery pieces (like this precious barrel chair) take a lot of time and material. On major upholstery projects, I barely get my money back on the materials, let alone my time. (If the cost of having something reupholstered knocks your breath out, try it sometime!)

And while I love doing what I do, I can't keep GIVING things away when I have so much time and money invested! (Ask my neighbors...if they say they love something, I usually give it to them!)

So...the big decision. From now on I am only going to do "smaller" pieces...little tables, wooden chairs, a few stools here and there...maybe a few dressers and such. And of course my first love, mid century pieces...big or small!

This table was a tad bigger....my neighbor bought it at a garage sale and wanted to know if I wanted to tackle it!

I love the old mahogany furniture and I love pieces that allow me to preserve some of the natural wood and still update with a little paint.

I removed the sides of the top that fold down and filled the screw holes with toothpicks and wood glue so the screws would reset tight. I STRONGLY suggest you do this EVERY time you remove old screws (it is also a great tip if you have a door hinge screw that is loose or stripped!) Takes very little time and will save you a thousand frustrations!

I stripped the top with 1/2 acetone and 1/2 lacquer thinner (see a full tutorial here!) and then applied 3 coats of tung oil finish. No stain...that is mahogany it all it's naked glory! Just breath-taking!!!

I cleaned the base with ammonia and water and then mixed up a batch of "plaster paint" with a "sample" paint from my den makeover. A little distressing and then sealed with spray poly.

This table is perfect for a small space but can easily be expanded if you need a bigger table!

Again, not really "my style" but the color is all the rage right now....evident by the fact that it didn't last a week. And while it was a "hot mess" when I got it, I loved bringing it back to life. It was a very enjoyable piece to work on!

And THAT is why I do what I do. "Finding the treasures" lurking under years of neglect and abuse.

It really is what I love to do! So I will continue to do what I love to do but I am going to FORCE myself to stick with the smaller pieces that allow me to enjoy my work without breaking my back!

We'll see how long this lasts!!!

Since I have posted a recipe in a while, I thought I would share a new roast recipe that is. to. die. for! Check it out here!

Info

8 Comments

June 2015...and MORE chairs!

June 2015 will go down as an eventual month for me.

For the first time in 34 years, I have no minor children. Katie turned 18 this week and it is official...ALL my children are old enough to vote, be drafted and be sentenced to an adult correctional facility.

We finally had to put our wonderful lab, Ginger, to sleep. She was 13. It was time but that didn't make it any easier. This is the second precious pet we have lost this year. Heart breaking.

And for the first time in years I really felt the sting of Father's Day. My dad has been gone for 20 years but this year was, for some reason, tougher than normal. He died exactly one week before Father's Day so this time of the year is always kind of a "double whammy."

Then there is the accidental "new member" of the family....and may explain some weird typos in my posts.

I keep a trailer at my apartments for abandoned furniture. A mama cat set up household in the furniture with her 4 babies. A few weeks ago, we THOUGHT we made sure all the kitties were off the trailer before we took it to the dump....only to find two of them still on the trailer when we got there. I managed to grab one and throw it in the truck, but the other ran under the truck. We spent 30 minutes crawling around on the nasty red clay/garbage ground trying to get that stupid kitten, only to have it bolt. Gone. I was heart broken. But to make matters worse, I could not find the other kitten ANYWHERE in my truck. Both Matt and Katie helped me darn near dismantle the interior of the truck...it was not there. I left the windows down the entire day and even put out some food just in case.

THREE VERY HOT DAYS LATER I went to the truck in the evening...and there was that silly kitten sitting on the back of the seat. It had been in a hot truck, with no food or water, for THREE DAYS! I couldn't believe it survived and neither could the vet.

Soooooo....we have a new "miracle kitty." And being the softy that I am, I can't bring myself to take it to the shelter. Especially with all the guilt I feel for losing her sibling and in spite of my puffy, itchy eyes.

Yes, she is a she. About 8 weeks, according to the vet, but if that is the case, she is a tiny kitty.

Cleo thinks it is hers and tries desperately to carry it around in her mouth...which means the poor kitten is constantly soaked in dog slobber. It is pathetic, but she tolerates it for some reason. And typing on the computer is like a game to her...hence the typos. She's a funny kitty!

We haven't named her yet...I keep hoping someone will want her and take her so I will quit itching and sneezing. Why bother...if the three other cats haven't killed me by now, this little half pint won't either! I like Mimi...Katie does not. Mitchell suggested Kitty, but we have a Ms. Kitty because she was another "rescue" that was only suppose to be here until I had time to take her to the shelter...around 9 years ago. So he suggested Little Kitty...so maybe "Litty."

ANYWHO!!!!! When I am having "emotional turmoil" my tolerance for some things is darn near nil. So when I went up to my booth last week, I was annoyed by a few things that have been sitting in there for MONTHS...specifically two chairs. So I threw them in the back of the truck, brought them home and gave them a quick makeover!

The first is a little folding chair I chalk painted eons ago...I had two and sold one, but this one has hung around far too long. I gave it a little KSTP (Kilz/sand/tack/paint) treatment with white spray paint...then I covered the seat with some leftover fabric from this chair makeover!

The other is a walnut mid-century chair. It is really difficult for me to paint over walnut...but the chair has been in my booth for months as is, and if I am going to sell it, I have to give it a little "pow treatment." Again, a KSTP treatment and new upholstery...someone is going to love it!

I know I make these little chair makeovers sound easy. And usually they are! Chairs are one of the easiest pieces of furniture to "update"...especially ones that just need a little paint and fabric on the seat.

But OCCASIONALLY I bring home a real kicker. One I KNOW is going to take a LOT of time and attention! This chair is a prime example!

I know...it is a HOT MESS!!! I have NO doubt that several people at the auction where thinking "What the heck?" (Including Brian...but again, I think he now trusts my judgment!) But I was so excited I couldn't stand it!

I was pretty sure, from a quick inspection on a broken piece (that was there, thank God!), that it was most likely mahogany. At this point, after just a tiny bit of research, I THINK it is a Victorian Eastlake arm chair. But I honestly don't know because so far I haven't found anything just like it...only similar. Castors on the front legs and not on the back and hand carvings and stamps on the wood.

And of course the BILLIONS of little nails that were used for the upholstery! ALL of which had to be removed!

I knew the finish was masking some beautiful wood so I couldn't wait to start stripping it! In this picture you can see where I applied the stripper (used in this tutorial) on the left....

Here is the "before" and "after" of the side...

The intricate carvings require some real work, but as I have said before, the very best tool for stripping old finish out of carvings and corners is a good ole' toothbrush! I still have a lot of stripping and scrubbing to do but after two afternoons, I have all 100,398,365,003 nails out and a tiny bit of the frame stripped!

The fabric is in such bad shape, I honestly don't know what it is...and I wonder if it didn't originally have another fabric on it since there are SOOO many nail holes. Many of the Victorian chairs I have seen have a velvet fabric....what to do, what to do!

My point...not all chairs are easy...some require a little more time and attention. I am going to take my time with this one and there is a good chance I won't sell it. At least not until the next little treasure comes along!

Info

11 Comments

A few simple chair makeovers!

I usually have several chairs piled in my garage waiting on a makeover. The reason they get "piled" is because most require, at the very least, a smidge of sewing. My LEAST favorite thing to do! (Okay, root canals are pretty bad, but at least they give you drugs!) I usually wait until I have 2-3 projects that need sewing before I drag out the sewing table and get it all done at once!

Right now I still have two of the mid century dining chairs waiting to be refinished...no sewing needed, but they are small and tend to get pushed aside...time and again.

And honestly, I had intended to refinish these and keep them but that plan didn't work out so I refinished and sold two of them!

I have a mid century lounge chair I desperately want to refinish and reupholstery, but I bought it to keep so I have no doubt the selection of an appropriate upholstery will take months!

I did manage to get two chairs finished over the last few weeks.

The first is a simple little maple chair I picked up at Salvation Army.

A "tired and tattered" little thing to say the least.

I decided to go simple...a little chalk paint and distress on the frame (followed by a coat of poly to seal it) and drop cloth for the seat. This is the first time I have used gimp for trim, but it turned out nice. I just hot glued it over the gathered skirt.

I didn't even bother to make a back cushion...I like the look of the wood slats!

This cain chair was a tad more complex. Naturally I completely forgot to take a "before" picture until I had already started deconstructing it! But I have no doubt you have run across them in thrift stores and garage sales...a dime a dozen and pretty much what they are worth in their current state! The real gem is finding one with all the caning in tact!

I really was at a loss as to what to do with this chair...until my daughter suggested I do it in blue and gold! Actually, she suggested teal, but I found this blue and white material I really loved! She was right about the gold...it is all the "rage" right now and becoming very popular!

After removing the seat and all the upholstery, I primed the entire chair with Kilz, sanded and wiped it down with tack cloth. Then I sprayed it with white spray paint! After that had cured well, I taped off the legs and sprayed them with metallic gold spray paint. I wasn't sure whether I wanted to keep the tufting on the back but I sprayed the buttons and reused them. They didn't really turn out "gold" like I had hoped...more a "brownish" color, but honestly, close enough. I used metallic gold bias tape to make the piping and the double welting (Here is a tutorial on making piping out of bias tape!) A simple little process, but again, it does require hauling out the sewing machine (ick!)

Again, I could provide a step by step tutorial on "reupholstering" these simple little chairs, but there are dozens of tutorials on line (including video tutorials) that are ten times better than anything I can do. And every chair is different, so find a tutorial that makes sense to you AND has a chair similar to what you have! This is the very first chair I ever tackled. Knowing what I know now, I can do better. I can honestly say that I learn something new every time I tackle a project like this and regardless of the little imperfections here and there, they always end up WAY better than what I started with!

I tend to be a tad on the OCD side when it comes to projects...but I have learned that nothing is ever going to be perfect! And again, as my very wise Daddy use to say "You'll never notice it on a passing train!"

Which reminds me...Happy Father's Day Daddy! It has been twenty years (this month), but some days it seems like we just talked yesterday. I wish you were here to see all the things I have learned to do. All because you taught me that working with my hands (and my head) and making something out of nothing really can be rewarding! I know you would be proud! Thank you.... and I miss you!

Happy Father's Day to all the great men out there who are blessed with kiddos!!! Be the man you want your son to be and be the man you want your daughter to marry ;)

Info

2 Comments

Another mid-century dresser makeover...

If you have followed along for any amount of time, you know I have a "thing" for mid-century furniture...and walnut.

I just love the clean lines of the pieces and how sturdy they are. You can not buy furniture today that is as durable and sturdy as many of these 50-60 year old pieces. Well, I guess you can, but you will pay a pretty penny for them!

And walnut? Well, in my opinion, there isn't a more beautiful wood grain out there.

A few months ago I featured a beautiful mid-century dresser I refinished and put in "Mitchell's room." I knew it was a tad big for the room, but I just could not resist.

As strange luck would have it, I was cruising Craigslist and found the matching chest. It just so happens that the people who owned the flea market where I originally purchased the dresser were selling the matching chest. Wow. What are the odds!

I actually ended up paying a tad more for the chest than I did the dresser...and it was in a little rougher shape structurally.

One of the big "boo-boos" on this piece was some pretty substantial chipping on the veneer of the top drawer corners....

Several of the drawers had missing or broken bottom "glides" and one had been VERY poorly repaired! (Hence, THIS rant!) And one of the legs was a little whomper-jomped. (Technical term for loose and wobbly)

I can not stress enough how important it is to make proper repairs. People, wood glue and clamps are your friend! I could do a tutorial a day on properly repairing furniture, but truth be told, there are a billion outstanding tutorials online for every imaginable repair. No, DO NOT use nails to secure dislocated dove joints. No, do not use silicone to try to put a drawer back together. No, do not put sheetrock screws in the leg of a dresser that originally had a bolt and clamp. If you don't know how to properly fix it, GOOGLE IT! (or email me...I love telling people what to do!) Seriously, it isn't hard to repair furniture, but if you do it wrong, I promise it won't last...and all the paint and refinishing you did to make the piece "pretty" will be a waste of time!

So, the first thing I had to do was repair and rebuild a few drawer glides. Then I had to fix the leg which required removing the old bolt, filling the hole with wood and glue and then replacing the bolt. Then I had to figure out what to do with the chipped drawer fronts.

Since I had refinished the drawers on the dresser, I really wanted to refinish this piece to match. Since there is really no good way to "rebuild" veneer and then stain it to match, I decided to remove the damage by creating a little "radius" on the corners. Probably not the best thing to do on a style known for it's clean, straight lines. I contemplated just cutting the corners at a 45 degree angle...but naaaaaa.

My goal was to improve the aesthetics a tad and also prevent further damage to the veneer in the future.

I used a paint can to draw a "radius" on the corner....

...then I used my mouse sander with 220 grit paper to carefully sand away the damage and round the corners. This is what I call "sculpting" a piece and it takes time and patience. When sanding, always start with a very smooth grade of sand paper (220-330) and only use a rougher grit if it is absolutely necessary. And ALWAYS sand with the grain!

Other than the chipping, the veneer was in pretty go shape and still intact. If I had used a rougher grit, I risked chipping or damaging the veneer further.

When it was all said and done, it turned out pretty well.

After making all the repairs, I stripped the top, drawers and legs using 1/2 acetone and 1/2 lacquer thinner and steel wool. I knew I wanted to paint the "cabinet" like I did the dresser, so I taped and papered off everything that was going to be left "natural" and sprayed it will Kilz, sanded smooth, wiped it down with a tack cloth, and sprayed it with my favorite spray paint.

The top, drawer fronts and legs were left natural. I didn't apply a stain because I love the look and color of walnut with nothing but clear oil.

I used the same process I use on all stained or natural wood. First I hit it with 0000 steel wool (always WITH the grain) just to smooth it a bit. Then I applied 3-4 coats of Formby's tung oil finish, rubbing it with 0000 steel wool and a tack cloth between each coat.

In all honestly, I really do not need two large dressers in this room. It is just the "guest room" now. But I really can't part with either of these pieces! They are just too beautiful!

Don't turn your nose up at old pieces that need a little time and attention. In the end, if you do it right, they will be well worth it!

Info

8 Comments

Paint...the easiest way to update a piece!

When I first started this site I posted every day. Seriously. Every. Single. Day.

That's okay when you are trying to catch up on 30 years of DIY projects...but after awhile it gets a tad tiresome. For a time I posted twice a week...very doable and since I usually have 2-3 projects a week in the pipeline, I always have something to share.

But life has gotten pretty busy around here the last few months. Katie's senior year (and all the hoopla that goes with that!) and then she and Matt's graduations....

Matt graduated from the UofA with his master's degree and a week later Katie graduated from high school with "highest honors."  Precious.... — Matt graduated from the UofA with his master's degree and a week later Katie graduated from high school with "highest honors." Precious....

And of course the apartments...seems the work around there hits in tidal waves...not just "waves" but darn near tsunamis. So the last few months I only found time to post about once a week...which means the projects have been piling up in my "blog files."

Right now I have hutch tops-turned-display cabinets, an antique dresser, a mid century dresser, an antique table, a side table, two chairs and much more...all piled up in the garage, finished and ready to share!

Today I thought I would share a few projects to show that a little bit of time and paint can completely change the look of a piece. I've shared similar projects in the past (tons to be exact...just cruise around this site!) but time and again I see people posting on several blog sites questions about "what can I do to make this better"..."help"..."blah, blah, blah.... bitch, bitch."

Dude. Seriously. Go buy a stinking can of paint! It really isn't hard to take a simple, "blah" piece of furniture and turn it into something worth having in your home.

Take this table for example....

...I see little tables like this at thrift stores and auctions for next to nothing. Or maybe your parents or grandparents gave you one when you started furnishing your own home. Solid little tables...usually in mahogany or walnut or even oak. (I have a similar one in my den that I painted and feature here.)

Let's be honest...not real appealing. I think this one sat in my booth for MONTH before I brought it home and gave it a bright chalk paint/distress treatment (My recipe for "chalk/plaster paint"... 2 1/2 TBS of Plaster of Paris, 1 1/2 TBS of water, mixed well then add 1 cup of latex paint)

I stuck it back in my booth and it only lasted a couple of days. Notice I didn't even invest in new hardware...I spray painted the existing handle with off-white paint!

This antique oak buffet was pretty "dated" as well. Again, something you might inherit from a family member or find in a thrift store or on Craigslist for not a lot of money!

(I took the picture after I had removed the mirror in the top piece)

Some people like the antique wood look and these pieces can be beautifully restored if you use this process.

I chose to restore the top since it was solid wood and paint and distress the rest of it....

I changed out the hardware...again, it only lasted a few days.

And another....

Sorry for the picture quality...phone camera!

This empire dresser was, as you can see, a hot mess. Literally falling apart but nothing a little glue and clamps couldn't fix right up.

Which reminds me...I was working on another dresser this week. Seriously people...dove tail joints were not nailed FOR A REASON!!! So don't try to fix them with nails. And silicone is NOT glue...so don't try to fix loose joints with silicone. My point, if you are going to fix something, fix it RIGHT. I spent over an hour just "undoing" someone else's "fix." If you don't know how to fix it right, GOOGLE IT! My daddy didn't teach me everything I needed to know about DIYing...but he did teach me to use my head and use available resources to find out how to do it RIGHT. And he didn't even have the internet!!!

Okay, rant over. So after some "rebuilding" and repairs on this dresser, I chalk painted and distressed it (again, Google it...you'll get around 1,170,000 results on chalk or plaster paint...I'm not kidding...I googled it and that is how many results I got)

The piece had nifty wood knobs...several were missing so I used a few from the buffet. I decided to give them a little facelift so I primed them and sprayed them with light blue spray paint.

I think it lasted a week!

And lastly, a mirror. I have featured a number of mirrors on here. IMO, they are one of the easiest things to update. This wood mirror had some interesting and intricate carvings but it was a bit dated and dark!

I decided to forgo my usual "boring off white" and give it a little pop of color.

For the time being, it is hanging behind the front door in what little "entry way" I have. Not sure I actually love it there but that is where it is...for now....

My point...stop looking at your dated, drab furniture and growling at it. Find some inspiration and roll up your sleeves.

Don't turn your nose up at those "dated" pieces your mom and grandmother want to give you...take them...again, find some inspiration and give them a simple facelift. There are countless super awesome ideas out there for every kind of project!

There are also unlimited tutorials out there on how to repair, paint, refinish, decoupage...if you can imagine it, a tutorial is out there to tell you how to do it!

Info

6 Comments

Display hutch...before and after!

Brian has long since stopped questioning my purchases at auctions. I think he has developed a little bit of faith in my ability to make something out of nothing. But occasionally I do question myself. I must have subconscious flashes of inspiration that, in the stark light of day, are forgotten because occasionally I will look at a piece I brought home and think "WHAT WAS I THINKING!!!"

This would be one of those pieces....

It's not a horrible piece...it's just very "ho-hum." Not an antique or even remotely interesting. Just...well...boring.... for lack of a better word.

Basically just a "pine and particle board" piece that is pretty dated...seriously, hunter green?

The upside to this piece is it did not need any major repairs...just a few nuts and bolts tightened here and there. The stained top, shelves and crown where in good shape and didn't need to be refinished.

Honestly, it just needed a little "facelift." A brighter color to update it a bit! I taped and papered off the stained areas, removed the ugly wooden knobs and gave it a little KSTP treatment (Kilz, sand, tack cloth and paint!)

My favorite teal spray paint and simple little black knobs and we are good to go!!!

I even "displayed" a few of my auction finds just so the pictures would have a tiny bit more interest! This piece would be an awesome addition to a kid's room, an office, or even in a kitchen!

Again, this is one of those "boring" or "dated" pieces you probably have floating around your house. Whether it be bedroom furniture, a little table, an old dresser, or even a dated light fixture, a couple of hours and a few cans of spray paint can make all the difference. You don't have to be even remotely creative...just find your inspiration and go for it!!!

I have a garage full of projects I have been working on since the weather warmed a bit! I can't wait to share...something for everyone!

Info

7 Comments

Antique china hutch before and after....

I have had this china hutch in my booth at Midtown for several months.

Sadly, I probably paid WAY to much for it...first auction of the season and everything was going for WAY more than what they normally do. I bought it because I think it is beautiful, but truth be told, it really isn't the "style" people look for these days, as is.

I have debated for some time whether I should bring it home and paint it. I just wasn't sure that would be the answer.

Just this weekend I decided to go ahead and bite the bullet but I was still uncertain. Until I saw this....

Marian at MissMustardSeed featured this beautiful piece she painted. You can see the "before and after" on her site!

Sometimes when we see what others do, it is all we need to find our own inspiration and relieve any fears we might have of doing what needs to be done to enhance a piece!

I love the grey against the mahogany, but right now everyone around here seems drawn to the "whites" so that is what I went with!

I used my favorite off-white, Swiss Coffee, for the "plaster paint." I did not sand or prime before painting it with the plaster paint...no need unless the piece you are working on is really rough! I distressed it just a bit (220 grit sand paper) to bring out the detailing and sprayed the exterior with poly to seal it!

I had originally planned to leave the inside stained...but it still seemed a bit dark so I removed the shelves and painted the inside a soft "teal." I taped and papered off the exterior and primed the interior with Kilz, sanded, tacked and then applied two coats of spray paint! I left the shelving the original stain finish.

I absolutely adore the original hardware so I left it!

One thing Marian does is beautifully style her pieces for photos. I rarely have the energy (or back!) to haul a piece inside and "pretty it up" before I take pictures. As I have said before I am more about the process than the pretty. HOPEFULLY someone else can envision the piece in their home and can find their own inspiration for staging it! Someday I may have the energy and space to make a pretty "backdrop" in my shop (okay, so it is really my garage!) Until then, the best you are going to get is a halfway decent "before and after" shot and maybe a little bit of instruction.

The two top shelves are a little "bowed." They are thin enough that I think I can lay them out with some weights on them to flatten them!

The debate raging right now is whether to reinstall the door (I did not paint it!) or leave it open.

Hum....

If this gives you a little inspiration to "makeover" a piece in your own home you have fallen out of love with, I have accomplished my goal!

Info

17 Comments

The den makeover reveal...

Honestly, on the surface it doesn't look like much of a reveal.

I had plans...BIG plans. New couch and rug, paint, new flooring, fireplace makeover...teal, greys, whites.

I found my inspiration, made a plan and started the plan.

When it was all said and done, it really doesn't look like I have changed much. My back and checking account say otherwise!!!!

Two huge projects did get completed. I painted and refaced the fireplace with travertine tile...

....and installed new wood flooring!

A little TIP for wood or laminate flooring. This is an "engineered wood flooring" you glue down. The transition pieces for this flooring were about $50 for a 6' stick, and I need three pieces! I went to Lowes and found unfinished transition pieces for around $15 a stick and stained them to match the flooring. Much cheaper! When I did my master bedroom floors in laminate, I did the same with the existing transition pieces...just gel stained them to match the new flooring!

Those two projects alone made a world of difference!

I did what I always do when looking for the perfect paint color ...I painted two samples on the wall and looked at it...for weeks.

But when it came right down to it, even with the new flooring, I really love the original color. This is my "fall room." Fall is my favorite time of the year and I just love the colors associated with the season...burnt reds, oranges, yellows, etc!

So off to Sherwin Williams I went to see if they could mix a 15 year old color. God bless 'em...they mixed it right up. I painted over the "test patches" and gave the entire wall a fresh coat of the same exact original color.

I did infuse a few splashes of "teal" here and there. It all started with these little birdies I picked up at Midtown several months ago...

I THOUGHT I would like this table in teal...

Boy was I wrong....I really disliked it so when I cleared out the furniture to install the flooring, it went straight to the garage for another makeover...

I originally painted these candle sticks teal...nope, not happening. So again, back to the garage for a second makeover.

I did paint this lamp a soft "teal."

It's not really "my style" but it is different and I like that. And the shade is actually brass with a black exterior. I got a great deal on it at a design studio auction. It had the original $450 price tag on it. A little pricey even for a heavy brass lamp...but for my $15 bid it was worth it! Believe it or not, you can paint brass!! A little metal primer and a little spray paint!

After dinner with my super awesome girlfriends, we made our usual TJMaxx run! I found these awesome pillows and decided they will look perfect on the grey couch I want to eventually get for this room...eventually...someday.

Not sure they are "all that" on the old yellow couch, but they will inspire me to eventually "transition" this room into the vision I had in the beginning...greys, teal, whites. For now, I will leave the original pillows...they have a little bit of teal in them...just for the sake of the ratty old couch!