Adding glass to an interior door...

As I mentioned before there are certain things that made this house instantly feel like home.

Almost identical to the master bath in my last house.

Same backsplash, floor tile, vessel sink, shower tile…right down to the same ole’ shower curtain and rugs. And I am waiting on windows that are pretty much identical to the window I had in my old bathroom. Still not sure what I want to do with the cabinets but I have always liked the stained and open shelving look of the last house…

….who knows. I may do a little cabinet makeover at some point.

My black doors….

Loved them in the old house, love them here…it was one of the first things I did to make this house feel more like my home.

The entry…

Same board and batten, same mirror and wreath, same rug…black door…

I like what I like…and these are just a few of the design elements I really loved in my old house.

Then there are the paint colors, plants, shelving….sooooo much more!

One project I did at the old house that I always loved was the reeded glass door in my laundry room…

I absolutely loved this project and it was one time I actually posted a pretty good tutorial. Mainly because when I went looking for a tutorial, I couldn’t find one!

I have known from day one I wanted another door like this in my new house. I debated whether to do it with the pantry door or laundry room door.

I finally decided to start with the pantry door….

Primary because I used the reeded glass in the upper cabinets and I thought it would look good to have matching glass in the pantry door.

I LOVE it! I love this pantry and the door is just the cherry on top! Eventually I may do the laundry room door as well because then the light from the window in the laundry room can filter into the breakfast room. For now I am perfectly content with the one door.

This is a MUCH less expensive option than purchasing a new glass door…and you get the option to choose the type of glass you want vs. having to get whatever “frosted” glass is in the door you purchase. And it is seriously NOT a difficult project to complete.

YOU CAN DO IT!!!!

Info

6 Comments

Painted kitchen cabinets and a new entry...

When Matt bought his house over a year ago I promised to share the projects. One year later, I am finally getting around to keeping that promise!

As I mentioned in earlier posts, Matt first had to find his inspiration and make a plan.

His first major project was the entry makeover. My entry makeover was obviously his inspiration but his entry felt SUPER tiny compared to mine.

These aren’t the best before pictures but you can see there is a header across the top of the opening between the living room and the “entry”…so the space felt really tight and cramped…wood flooring (again, a no-no in an entry IMO)…popcorn ceilings.

The “plan” was to remove the closet and header to open up the space, tile the floor and paint the door. Simple!

Before you remove a closet, make sure you have a plan in place for the things you would otherwise store in that space. In Matt’s case, he’s a single guy with two spare bedrooms and closets, a large master bedroom closet and a nice hall pantry. He had plenty of storage space for coats and such…getting rid of the entry closet was not a big deal.

UNTIIIIIL…you start hacking into walls and removing headers that are framed with aluminum studs instead of wood. Interesting to say the least and somewhat of a challenge for a “traditional” builder such as myself.

Lots of sheetrock repair, black paint on the front door that Matt is not real fond of but is living with for the time being, new trim, new tile, new paint. Eventually I think he will replace the light fixture…but it does the job for now.

Here you can see how the entry opens into the living room…before there was a “header” that dropped down 12” and really closed that space in…removing that header not only opened up the entry but it now matches the opening into the hallway that leads to the bedrooms on the other side of the living room.

Matt built the little bench! I found the beautiful metal mirror on clearance at a home interior store.

The fireplace was pretty “dated”…he painted it last year ….

…and we replaced the dated 8x8 beige tile with the same tile we used in the entry. MUUUUCH better!

The very first thing we did before he moved in was built open shelving in the kitchen. We used the “hidden bracket” method I shared here.

His kitchen cabinets were old, nasty oak and he knew he eventually wanted to paint them…but time and finances dictated he wait…the open shelving was a pretty easy and inexpensive way to give the kitchen a tiny update. Since he had his inspiration and had a plan, he knew what colors he wanted to eventually paint the kitchen cabinets…so he knew what color he wanted to paint the shelving.

We simply removed the cabinet to the right of the sink and installed 3 shelves. The cabinet we removed didn’t go to waste…he hung it in the garage above his work bench!

Painted cabinets…this summer he was finally able to complete this part of the plan.

The kitchen before…

The kitchen after…

He hired the actual “painting” part but he did all the prep work himself. He changed out the hinges from nasty ole’ brass looking things to nice new satin nickel hinges.

He also changed out four upper cabinet doors and put reeded glass in them…

The shelves inside the cabinets were old and “sagging” so we built new shelves since you could see them through the glass.

I would like to think I was the inspiration behind that change since I am a tad partial to reed glass cabinet doors!

One element of his original plan was to change out the tile countertops to a solid surface like quartz or granite. Honestly, once the cabinets were painted neither of us found the tops to be nearly as offensive so that part of the plan got bumped to the bottom of the list. It will happen someday, but it is no longer a top priority!

This kitchen is a relatively small space…kind of a “shotgun” or “galley” kitchen if you will…brightening it up with paint and installing the glass front doors and the open shelving made a HUGE difference!

The next big project on his list is his master bathroom. He wants to remove the tub/shower insert and build a walk in shower similar to mine.

Last week I went to an auction and I was able to purchase enough 12x24 floor tile and subway tile for pennies on the dollar!!! He’s been researching the best way to build a shower pan and of course we are experts at demo! So this little project could commence any day!

In the meantime he is busy being a home owner…mowing and raking the yard, mundane chores and dealing with all the grief after a tree falls on your house during a storm! Yep, it even damaged his brand new storage building he is so proud of!

Such is the life of a home owner!

Next week is Christmas and I may take a few weeks off since the whole family will be here! I hope you and yours have a VERY MERRY CHRISTMAS AND HAPPY NEW YEAR!

Info

Comment

The calm AFTER the storm....

We have all heard the expression "the calm before the storm." For DIYers, we live for the calm AFTER the storm.

Before the storm we are searching non-stop for "inspiration," driving all over town or burning up our computers looking for materials... measuring, planning, pondering, stressing.

Then the day comes...the dreaded "demo day!"

Unless you have the luxury of starting from scratch there is always a little bit of "demo."

As you probably know I have spent the better part of three years "sitting on my hands," doing everything in my power to NOT paint my kitchen cabinets. I just know that someday in the future the "white cabinet craze" will come to an end and I will be stuck with painted cabinets.

SOOOO...in that quest, I have "reset" my entire kitchen, built open shelving, installed glass doors...and now? Well, after much measuring, planning, pondering and stressing, I have decided to take two more steps to a "lighter, brighter" kitchen WITHOUT painting the cabinets.

Hence, the "storm."

This is my kitchen shortly after the "reset".... "at peace."

I decided to install a lighter backsplash. It is time. The tile has been there for 17 years. Truthfully, itwas still the right style, just not the right color....everything was so "orange."

I went online and searched for some inspiration...I was pretty sure I wanted travertine but I wasn't sure what style...subway, tumbled, split-face...just so many options. One of the problems I ran into is that "painted cabinet craze." It seems so many kitchens that feature travertine backsplashes also have painted cabinets...mine are stained.

But I found a few "inspirations" that allowed me to see what the different types of tile would look like...again, I put the pictures in my "inspiration file" and didn't bother to save a "link." So my sincerest apologies if this is your kitchen or picture and I do not give you proper credit...just know that imitation is indeed the sincerest form of flattery!

These are just of a few of the MANY photos I put in my "inspiration" file.

So off to the tile stores I went. Honestly, I have been looking for new tile since I installed new granite over four years ago...to no avail. I finally found one I loved! I brought home a sample...looked good. Played with it in different lights...all good. So I ordered it!

Here is one small problem with even the simplest change around here. If I am going to install a new backsplash, now would be the time to install the larger window I've kinda been wanting. Bigger window, more light... "lighter and brighter." Right?

But do I want one that raises up like the existing window...or maybe one that slides to the side and has a screen that slides so I can hand stuff out to Brian while he grills.

Hum....so off to the window store. Remember, I DO NOT like to shop...so "shopping" for new windows and tile for a kitchen I know I will have to live with for MANY years is not really what I call "fun."

Finally settled on a larger sliding window and a travertine tile and after everything was ordered I started the dreaded "demo."

First, I removed the 9" cabinet to the left of the window. Honestly, the only thing in that cabinet were long expired cold medications and eye glasses my 28 year old son wore when he was 14! The cabinet didn't go to waste...I removed the door, painted it to match the laundry room cabinets and installed it between the two cabinets above the washer and dryer!

I can still tile, so I started removing the old tile...which means removing the sheetrock because, well, you ARE going to tear up your sheetrock when you remove ceramic tile. No way around it.

Now this is when I admit that I am no longer super woman. When I changed out this window the last time (no, this is not the first time I have changed out this window!) I did all the work myself, except the siding (I don't do siding). I removed the old window, framed in the opening for the new window and installed it.

But that was a few years ago and this time I decided the cost to reframe and install the window was equivalent to what I would spend at the chiropractor. So I hired it done!

After tearing up one wall of tile and sheetrock, I decided to do a little research about tiling over tile.

Now I am one who NEVER paints over paper, or papers over paper, or tiles over tile. I'm a firm believer in removing the old before installing the new. But after a lot of research and talking with a few "experts" I determined that there is no reason I could not tile over the existing backspash...it was sturdy, the tiles were all firmly attached to the wall and I didn't have any mold or mildew issues. So rather than remove ALL the tile around the entire kitchen and then have to replace ALL the sheetrock, I broke my cardinal rule and tiled over the existing tile on two walls.

After a day of window installation and several days of tiling, grouting, sheetrock repair, trimming, painting and cleaning, this is what I ended up with!

I also took the opportunity to add two more glass front doors. I had added several when I did the original "reset" a year ago, and I loved them. So I ordered two maple doors for the cabinets on both sides of the refrigerator, stained them to match the existing cabinets and added reeded glass...love!

My next big goal for this kitchen are new appliances...but as I have said before I can't bring myself to buy new when the old still works just fine...so someday! Honestly, it is a good thing I didn't do it a few years ago when I got a bug for stainless...because now I love the "black stainless." See...it's a good thing I didn't follow the fad then!

For now I am enjoying the "lighter and brighter" of the new backsplash and larger window!

Info

4 Comments

The kitchen makeover reveal!

It is time for the big KITCHEN REVEAL!!!

First, I had to wait on the maple trim...then I decided to wait on the new doors and glass!

I had not intended to start decorating for fall before "the big reveal." My plan for this week was to do the glass doors Tuesday, take pictures of the kitchen and get ready for Matt's birthday celebration Wednesday (he turns 26 Saturday!), post the reveal Thursday morning and then get most of the fall decor up and get my hair and nails done ...AND LEAVE FOR COLORADO FRIDAY!!! Yippeee!

One hitch...I got a call Tuesday morning that the glass wasn't on the delivery truck so it wasn't going to be in until Thursday...well that just threw a wrench in my whole week. So Tuesday I started working on my fall decor. Tuesday afternoon, the glass place called and said they "found" my glass and it was ready. Sooooo....short story long, the "reveal" pictures are going to have smatterings of fall!

I think I have mentioned before that I have a bad case of "Pinterest envy" when it comes to kitchens.

Tipsaholic recently featured some beautiful kitchen pantry/storage ideas. I love the painted kitchens and all the open shelving but the one thing I noticed about EVERY picture, whether featuring beautiful glass containers or pull out drawers, was the ORGANIZATION of every item and space.

For me, the key to a great kitchen (or any space for that matter) is making sure everything is organized and functional for MY needs! And of course aesthetically appealing, but unless it is organized and functional, I am wasting my time making it pretty!

While I love all the neat pull-outs and storage inspiration, I think the first thing you need to do BEFORE you start any kitchen remodel is get every drawer and cabinet purged and organized and see what you have, what you need and what space you can rework, organize or add to make your kitchen function for YOU! Plan, plan, plan!

Here is a post on purging and organizing your kitchen drawers! A super simple little project but it has made a big difference in my ability to find stuff I need!

My goal in "resetting" my kitchen was to make it more functional for my purposes.....and of course, change things up a bit aesthetically so I am not tempted to take a paint brush to these beautiful cabinets

I basically had a "standard" (and small) kitchen layout.

I do love stained wood and as drawn as I am to painted cabinets, I knew the day would come in the future when I would regret painting mine. My stain color (Paprika Cherry on Maple) isn't totally offensive and fairly "timeless" if that is possible, unlike my daughter's kitchen which had "pickled oak," a stain my dad and I were putting in houses in the 1990s!! I did not discourage her in the least when they decided to paint their cabinets.

For those who believe "white is classic and will never go out of style" obviously don't remember the "honey oak" trend of the 90s..."oak is classic and will never go out of style!" EVERYTHING goes out of style...eventually! Which is why we are all painting honey oak cabinets!

Earlier this year I made an offer on a smaller house with a smaller yard in a subdivision I would love to live in. The house was basically a "gut job" and the new kitchen I designed had NO upper cabinets...none! I wanted lots of windows, maybe a few open shelves, tons of base cabinets with drawers and a big island.

But that deal didn't work out and I don't have the "footprint" to build a kitchen even remotely close to what I would have put in that house. Right now I don't have the funds (or energy) to make major changes and I can't bring myself to change out appliances that aren't totally offensive and work perfectly fine!

What to do, what to do!? I wanted some changes, but I didn't want to do something I might regret down the road.

This is one of those times when I had to "work with whatcha got" and make changes that would give me a few elements I crave, without spending a ton of money or eating out for 2 months while the kitchen is in complete disarray. In the end I probably spend under $800 (doing the work myself!) and I think we ate out two nights! Keep in mind that the three doors cost around $200 and special order maple trim can be costly. The changes I made would be A LOT cheaper if you use stock trim and don't add new doors!

If you aren't in a position to spend a lot of money on major changes and upgrades but you love the concept of open shelving and more storage, these few changes might just be the answer!

I did not paint my cabinets but I was making changes that required a few pieces of new maple trim the color of the existing. THAT is a Herculian task and one I would advise you do BEFORE you start moving things around...unless you have stock wood like oak or poplar, or intend to paint the cabinets! My kitchen cabinets are 16 years old and honestly even if I knew who, what, and where the odds that they would have trim pieces to match after all these years are pretty slim. I tried finding stock trim that came close, but none was close enough. There are cabinet manufacturers that will do "color matches" but unfortunately they won't do it for a few pieces of trim.

As I have mentioned before, most manufactured cabinets and furniture have a stain and finish that is sprayed on...so matching an existing finish can be pretty difficult! Thank you David, at Sherwin Williams in Springdale...most amazing color match EVER! I honestly can not tell the difference between the original and the new! I took a door and a few samples of the new trim and he matched it right up...amazing!

There were a few things I wanted to accomplish in this little "makeover." First, I knew I wanted open shelving. That is one element I am always drawn to in my quest for "inspiration." (Here I talk about finding your inspiration for ANY project!)

I wanted to "pop up" a few of my cabinets and open a few up for display. In the post featuring my laundry room, I tell you exactly how to "pop up" existing cabinets.

Moving the dish cabinet, spice cabinet and the two cabinets on either side of the refrigerator allowed me to add the open shelving beneath them.

Here you can see a step by step tutorial for constructing three different types of floating shelves!

The frame to the left is just foam board with scanned copied of my grandmother's old recipe cards tacked to it! The boys always gripe about my "shallow" bowls so I pulled a couple Philbe Fire King bowls I had in my booth and then ordered small matching custard cups I found on Ebay for dips and such!

My spices, along with my cooking and serving spoons, are now at my finger tips!

I love all the different glass jars! I painted my old knife block a pretty teal just to freshen it up a bit! I love refinishing and repurposing old cutting boards...this one is perfect for holding recipe cards!

This is now my "baking corner." I added the antique fan for comfort...you can see how easy it was to rewire this 80 year old fan here and bring it back to life!

I choose not to pop the cabinets all the way to the ceiling. I know some would, but I have 9' ceilings and to do so would have looked funny and made the cabinets completely unusable.

One thing I really love are the stainless and glass vent hoods. I really dislike the big hulking, over the range microwaves. The truth is, I don't have the real estate for a counter model, so for now I will stick with the big hulking over the range microwave! Poo.

I removed the doors on two of the cabinets and painted the interiors. After looking at them for a few weeks, I decided I did not like that open look even with all the "pretties," so I ordered new maple doors, stained them and added reeded glass inserts...like my laundry room door! (LOVE!)

I get the "openness" without the cabinets looking "unfinished." There is a chance I may eventually do this with the doors on both sides of the refrigerator!

I did add some under counter lighting above the pasta shelf and the "baking" shelf.

I wired into the existing under counter lighting and ran the wires between the cabinets and across the top of the cabinet above the refrigerator that was covered by a shelf. Now all the under counter lighting can be turned on with a flip of the switch that was added when we did the original lighting!

I added glass jars here and there to hold tea, baking stuff, beans, and pasta. I love the Anchor Hocking Heritage jars for flour and white sugar but they don't have sealed lids which is necessary for brown sugar. (That was one great thing about reworking and organizing my pantry...I was able to designate one cabinet and shelf area specifically for baking stuff.)

I found sealed jars similar to the Anchor Hocking Heritage jars, as well as jars tall enough for spaghetti and linguini at TJ Maxx! I ended up with a variety of jar styles I picked up at TJ Maxx, flea markets and Oneida online.... and I like the different looks!

While I think the matchy-matchy boxes and storage bins are super cute in pantries, I prefer to actually SEE what I have...so I organized my pantry and cabinets so that like items are together and I am able to see what I have and what I need at a glance!

The upper shelves were a great addition...mostly so I can now openly display my cookbooks and a tiny bit of my china (I have 6 sets!) and also a few little decorative do-dads.

The old coffee grinder is one I have had in my booth for MONTHS...probably because it is missing a piece of the top...but it looks pretty neat on the shelf with the big gold B I picked up at the flea market, a fall berry wreath (I also have a boxwood, but the berry wreath is a new fall find this year) and an old chopping board I turned into a little "chalkboard."

This shelf had to be removable for one special reason! "Lord ?" He is stored away in the attic for the time being, but he has to have a special place when I decorate for Christmas and he would be too large for the space if the shelf could not be removed. So I painted the shelf bracing the same color as the wall and the shelf can easily be removed when it is time to display him!

As you can see, my kitchen is pretty "traditional." With furniture, I tend to lean more towards the clean lines of "modern/mid century" now but as with everything in my house, my kitchen is more of a mix of traditional, modern, and "farm house." Eclectic, to say the least. That seems to be the "style" I am most comfortable with...not too much of any one style, but a broad mix of everything!

A toss of this, a pinch of that, a smidge of whatever strikes my fancy!

One of the great things about being "eclectic" in your decorating style is you can pick up anything without worrying about whether it fits in with the "style" of the room. Whether it is modern, traditional, transitional or farm house...if I like it, I can usually make it work!

The biggest improvement for me is the addition of the open shelves and my ability to reorganize a few spaces to make the over-all kitchen a tad more functional and organized.

And that my friends should be the PRIMARY goal for any "makeover." Because let's be honest...if the piece or space isn't functional and organized, all the pretty it the world isn't going to cut it!

First and foremost, make your space or piece functional and organized. THEN make it pretty!

BTW, as much as I debated painting the fireplace wall when I remodeled my den I am SO glad I didn't...it is perfect for the holiday seasons...fall AND Christmas.... and I can't imagine it any other color!

Friday we head out for our annual train/zipline/fishing/Aspens adventure! I am soooo ready. Matt will be here holding down the fort and when I get home, fall will be in full swing...regardless of the temperatures!

Info

3 Comments

How to install a window in an interior door!

I told you...when I am trying to avoid ripping into a MAJOR project, I start little ones.

I haven't had a lot of time to "project" around the house. Between the apartments and the furniture makeovers for the flea market, I've been a bit swamped. But I keep walking into my kitchen with a tape measure and graph paper and that is dangerous!!!

So I decided to tackle a small project I have been mulling over for some time. I checked Pinterest and there weren't any tutorials for this project so I had to make it up as I went!

I wanted to add a window to my laundry door. It is a small room and while I am RARELY in there with the door shut, I thought it might open up this hallway a bit. And honestly, if I really like it, I may do all the doors. (I painted my interior doors black and shared that project here. It has been over two years and I STILL love them!)

As with many projects, I mull and plan and think and draw. I finally just took the door into the garage and cut a big ole' hole in it with my skill saw and jig saw. Solved the big problem...procrastination. Now I kinda had to do something with it...lol!

I did make one critical error on this project. I neglected to get an estimate for the reeded glass I had fallen in love with. When I did call (AFTER I cut the hole!) I found out the glass was going to cost me THREE TIMES more than I "guestimated." To the tune of $160. Lesson learned...before you fall in love with an "idea," FIRST make a plan and get estimates! I could have gone with a cheaper decorative glass, but I wanted THIS glass.

My interior doors are typical "builder grade" six-panel, hollow core doors. When you cut into them you will find they are exactly what they say they are...hollow. Truth is, the only real wood bracing is around the edges and where the hardware attaches.

So after cutting a big ole' hole in the door, I had to install wood bracing for my window frame.

The bracing needed to be 1 1/8" thick to fit between the "skins." If you are familiar with wood cuts, you know that is not a standard cut. I could have stopped in the local door shop and asked for some wood strips to use for bracing around the cutout but I decided to use some wood I had on hand and rip it down to the width I needed.

Therein lies one of the problems I have when DIYing. I don't own a table saw...and never will. My father (who grew up in construction!) had 3 brothers and a brother-in-law...and he was the only one of the 5 who managed to get through his life with all his fingers intact. And someone once told me that if the wood got bound up in the saw, it would kick back and hit you in the face. Now I have never been on the cover of People Magazine's "most beautiful woman" issue, but I kind of like my face. One time I stupidly tried to use a utility knife to cut through vinyl siding...the knife slipped and the blade whacked me square in the nose. At the time my daughter was in diapers so I drove to the ER with a diaper on my face and demanded to see a plastic surgeon. After inspection in the bathroom mirror, I determined that it was a fairly superficial cut (dang, noses can bleed a lot!) and quietly left the ER without ever seeing a doctor (I do still have a scar!)

So I won't use a table saw. When I build cabinets or shelving, I have the awesome guys at Lowe's cut my plywood. But I have found a way to cut fairly straight lines for most projects.

I drilled little holes in a large metal yard stick. I measure for my cut and mark the line on the board, then I secure the yard stick with screws 1 1/2" from the cut line...this basically creates a "guide" to run my skill saw along and allows me to cut a straight line.

Problem solved! Now if I could just figure out a way to get a flat tire changed since my father is no longer around and my favorite tire shop closed. Thank God I haven't had a flat in 20 years! Cuz I don't do that either!

Anywho, after cutting 1 1/8" bracing strips, I cut four pieces the length I needed for the four sides of the opening. I applied wood glue and slipped the strips between the door "skins." A little trick...set a screw on each end of the board before putting it in the door...that way if it slips to far into the door, you can use the screws to make adjustments. Then just back the screw out when you have finished clamping.

I measured from the inside edge of my strips to the outside edge of the door...all the way around....and adjusted the bracing strip so that I had the same distance from edge to edge. My cutout was NOT the exact distance from the edges, but the strips need to be since I would be attaching my "frame" to it. I also measured the opening to make sure it was the same width and height all the way around.

After making adjustments to each strip and making sure each was in the proper position, I clamped them and let the glue dry.

No need for nails...wood glue will do the trick if you let it dry well!

After the glue dried, it was time to add the "inside" framing. Fortunately the width of the strip and the skins combined was 1 1/2". That worked out perfectly for 1/4" x 2 (really 1 1/2") craft board (available at Lowe's) as my frame!

I measured and cut them with my chop saw. I pre-primed my trim pieces with Kilz and sanded and then I installed them with glue and trim nails.

Yes, I noticed the bottom frame piece was a tad off...my bad. I ended up "lifting" it, removing the nails and repositioning it so it was flush with the side piece!!! One of the many stupid frustrations of DIYing...the dreaded "oops."

I wanted a very simple and small trim since the real focal point of the entire project is the window! I thought I could use the 1/4" x 2 craft boards but they only came in 3' lengths and the height of the window was over 36". I ended up buying what is called "door stop" material....the piece of trim on the inside jamb of a door that actually stops the door. It is 1 1/2" wide and 1/4" thick and it comes with or without a decorative profile on one edge. I ended buying the one with a little decorative edge, just for a tiny bit of detailing! I trimmed both sides of the opening. (Forgot to take a picture after the trim was placed, but you can see it in the next picture! I secured it with glue and trim nails).

I found a teeny tiny little decorative trim to use as a "frame" for the window. It's really tiny...1/4 wide. Since my frame is 1 1/2 wide, I marked the center (3/4") and then 1/8" on each side since glass inserts are usually 3/8 to 1/4" thick.

I cut and CAREFULLY glued and tacked the tiny trim on one line.

I went ahead and caulked everything, puttied the holes, gave it a light sanding and painted it all. I did this so I would only have to tape off and paint one side of the window trim after I got the window set in place! (Mistake alert! I didn't prepaint the backside of the tiny trim I put on last...so you can see the white primer through the window now that it is installed! Paint the backside of your trim before you put it on!)

(Then I had to wait a week because I didn't think about the fact that they might just have to order the glass...which took "3-5 business days." Then I had to wait ANOTHER "3-5 business days" because they ordered the glass wrong...delays are inevitable!)

After the paint dried (and the glass FINALLY came in!) I applied a SMALL bead of silicone caulk all the way around the inside of the tiny trim and set the window in place. The silicone is important because it holds the glass in place and creates a "soft bed" for the glass so it won't rattle around in the frame. Then I glued and tacked the tiny trim on the other side of the window. (Do this VERY carefully...if you hit the glass with a nail it WILL shatter!)

TA DA!!!! I absolutely LOVE it. The glass (reeded glass...google it!) is absolutely perfect. But it was NOT cheap.

This is "rain" glass and it is about 1/3 the cost....

...a very pretty glass and a much cheaper option. But it wasn't the look I fell in love with so I paid the price for the glass I wanted. However, the odds of me doing the other doors is slim!

If you are installing glass in a door, I would strongly recommend getting a piece that is "tempered." It is about 4x stronger than "plain" glass and if shattered, it breaks into a bunch of tiny, relatively harmless pieces vs. the super sharp shards of regular glass!

Tempered glass really isn't that much more expensive...especially when you consider the safety factor!

Also, the glass will be much heavier than the "hollow" door...so this is the time to replace the short hinge screws with longer screws that actually go into the framing of the door. You can buy longer hinge screws, but I just used black sheetrock screws. I will probably change them out next time I make a run to Lowe's. This is important because the weight can cause the door to "drag" or stick on the knob side. For that matter, if you have a door that drags or sticks, try replacing a few of the short hinge screws with longer ones! This door was sticking even before the new glass and using the longer screws worked like a charm! (In the picture above you can actually see where the black paint rubbed off on the door jamb!)

There you have it. A tutorial for dressing up an otherwise boring interior door! There are so many other things you could do with this same process...maybe a chalkboard insert or fabric or even a MUCH less expensive glass!

You are only limited by your imagination!