Another new dining room table and the greatest Mother's Day gift....

ANOTHER dining room table…obviously I have a soft spot for chairs and tables. When I saw this pathetic trestle table at a barn auction a few weeks ago, I just knew she had some serious potential….

The top was in pieces and the finish was crud…but oh the potential. And it wasn’t until I got her home that I discovered her little hidden secret…

She has this super nifty fold out “leaf.”

Just too fricking cool!

In spite of the fact that I have been up to my earballs in work at the apartments, I couldn’t wait to start working on her. The first thing I did was strip all the old finish…HERE is the process I used. This is a tried and true process that makes quick work of a daunting task!

After all the old finish was stripped off I had to glue and clamp the table top back together….

I always make my repairs AFTER I strip but before paint or finish…and I always make sure I make all the necessary repairs. No sense in making it pretty if it is just going to fall apart…glue and clamps!!!

The top was solid (vs. veneers) so the pieces were a tad warped…no biggy…I clamped it as well as I could and then I sanded the joints smooth…starting with the finer grit (220) and working my way down to a rougher grit (150) and then back up to a finer grit, before applying a tung oil finish.

Tung oil finish is my “go to” finish for many reasons…it is super easy to apply, it is super durable and it is super easy to reapply when the finish gets scratched or begins to dull!

So, when all was said and done, this little table will now take her place in the dining room….at least for the time being….it is no secret I swap out tables on a regular bases….here are just a few I have featured over the years…

A Duncan Phyfe….I gave it a little makeover HERE before selling it….

An antique trestle I featured here

An oak farmhouse table featured here…..

The most recent…an antique draw leaf table…

All these tables have one thing in common…they are relatively “compact” but can be expanded to handle Thanksgiving dinner. Basically once a year I need a large table…and these all fit the bill.

The newest little trestle table is compact, expands, and beautiful!

So get ready for a few pictures…..

I just LOVE the new light fixture from Wayfair I featured here….

I love how it can easily be expanded. No more having to find a place to store leaves or hauling them out for one dinner…just slide open the top and fold out the insert…simple (especially after a little WD40)

One huge problem….I REALLY dislike the Duncan Phyfe chairs with it…they just don’t look right…and sadly I know exactly what chairs I want for it and I have had them and sold them a few times over. The good news is I will eventually find what I want….

Until then I bought this little piano bench at the same auction. Again, pretty cruddy…

…but I stripped and oiled the top, scrubbed up the brass feeties and painted the base with my new favorite blue…the same one I used on the buffet (here)

Meh….not really “swooning” over it, but it will serve the purpose for now…until I can find the chairs I want or another pathetic little table catches my eye. I wouldn’t take bets on which happens first!

THE GREATEST MOTHER’S DAY GIFT

This year I received the absolute best Mother’s Day gift!!! Another college graduate.

My youngest daughter, Katie, graduated from the University of Arkansas with a degree in Bio-Engineering.

She is beautiful, smart, and talented…and I could not be prouder.

She, as well as her brother Matt (Masters 2015), are fourth generation Arkansas graduates….my great grandmother graduated in 1920, my grandfather graduated in 1943, and I graduated in 1987.

Brian and I are now 5/5….five kids, five college graduates. And the fact that all five were here for Katie’s big day, which happen to be Mother’s Day weekend, made my day extra special!


Craftsman dresser....

I have said it before…”Imitation is the sincerest form of flattery.” Unfortunately, not every one likes to be “imitated”…or “copied.”

But I have to wonder…why do others post projects on blogs or Pinterest if not to give inspiration…inspire others to “imitate” their creativity.

I have NO problem with others “imitating” my creativity…imitate away! This entire blog is here to inspire you to make your home more beautiful. And if you are looking for inspiration for projects you intend to sell, help yourself….there are A LOT of people out there who couldn’t paint a piece of furniture or hammer a nail if their life depended on it. They need your abilities and creativity and if I can inspire you to create for others…yay me!

I try desperately to give credit where credit is due…if something “inspires” me I try to link back to the site. Unfortunately, I am the world’s worst at seeing something I like, “drag and dropping” the photo into my “inspiration folder” and not actually saving the link. I really do try to go back and find where the photo might be posted, but I can’t always find it! Same with recipes. I’ll see one I like, print it off and then I can’t find the original recipe.

Fortunately, this time I not only have a picture of the inspiration, I also have the link….HERE! (This dude has some mad woodworking skills and his dresser got some heavy duty reconstruction.)

The minute I saw this little dresser/changing table I knew I had to do one.

Fortunately I found a dresser that had perfect wood detailing on each drawer that allowed me to paint the “silver handles” rather than add new detailing. I also didn’t do any “reconstruction” on the piece other than adding bracing and wheels.

You can buy these wheels at Lowes…they just screw on!

Unfortunately, this is where I have to admit AGAIN what a bad blogger I am because I failed AGAIN to take a “before” picture. Suffice it to say, it was just a plain ole’ fake wood grain dresser…perfect for a little makeover!

Other than the wheels, the only other thing added was the “Craftsman” decal…believe it or not you can buy them on Ebay…HERE.

I found a red gloss spray paint that is a perfect match for the “Craftsman red”….the black on the drawer fronts is black lacquer…and of course the silver is just “stainless” paint. I primed the entire piece with primer, sanded well and wiped it down with tack cloth…then paint (KSTP).

Just too stinking cute!

Feel free to be “inspired” and copy away!

Drexel Accolade Makeover...

An entire year…A YEAR!!!! That is how long this Drexel buffet has sat in my dining room in it’s original state because I couldn’t pick a stinking paint color. I may be able to paint and refinish and upholstery…but picking a paint color or fabric is TORTURE!!!!

I LOVE the white lacquer finish on this little side table….

….and I love how the bright brass hardware just POPS on the white lacquer but I really wanted to do something different.

But I could NOT make up my mind. I did a lot of research and most of the painted Accolade pieces are white or black…and honestly I did not want to do black.

Hum….

I found a paint color I am madly in love with!!!! It is actually a Krylon “chalky paint” and I have used it on several pieces and I just LOVE the color…Krylon’s Anvil Gray. While it has “gray” in the name it really is a true deep, rich navy. And it sprays on beautifully!

There was one problem with this paint for this project…it is super flat…like most “chalk” paints. I desperately wanted a “high gloss” finish so I tested a few clear coats over the paint to see if I could find a good gloss. I tried a new product (at least to me), Krylon Triple-thick Crystal Clear Glaze. It SAYS it is a “glass-like coating” and “superior high-gloss finish” and it is as good as advertised.

The finish is super high gloss and exceptionally durable…I am VERY pleased.

So…

I changed up the art in the dining room over a year ago and I still love it. I still love the red fabric I used on the chairs. I love the draw leaf table. If you search “buffet” or “dining room table” on this site you will see few last long around here….but truthfully, I think I am finally loving the “look” of my dining room…so these pieces may actually make it a tad longer.

Again, no secret to cleaning brass….lots of brass cleaner, SOS pads, and elbow grease…but worth every bit of the work!

I have already stocked it with my holiday and seasonal dishes. Pretty with a purpose…my favorite. But as I said, buffets don’t last long around here so we’ll see how it fairs.

I think I have mentioned before that I DO NOT have a green thumb when it comes to indoor plants….so some of you may be shocked by the massive peace lily.

A little side story…we went to an auction…they were selling the plants (yes, they sell EVERYTHING!) Nobody would bid on this big ole’ monster so then they threw in a monster pothos plant…I’m talking HUGE!!!! My youngest daughter has been sprouting “cuttings” for her apartment so I knew she would love the pothos…so I ended up buying them both for ONE DOLLAR!!! No kidding….a dollar for two huge plants. She didn’t want the peace lily so I stuck it in my dining room and other than dump my leftover night time water in it every morning, I pretty much ignore it.

And you know what…it THRIVES. It is growing, it is healthy and it is constantly blooming. Go figure!

Now I want to share a little issue I am having with my beloved Kilz…I had this issue sometime back when I was using white lacquer…so honestly I attributed it to the paint since lacquer tends to be a “hot” finish.

But I had the same issue this time, and I was using plain ole’ spray paint.

I call it “alligatoring.”

I cleaned the pieces, sprayed on the Kilz, sanded smooth, then wiped it down with tack cloth. When I sprayed on the paint, it “alligatored.” Curses!!!

I thought MAYBE the tack cloth left a weird residue, so I sanded the spots smooth after they dried well, reapplied Kilz, sanded and then just wiped it down well with a rag…another coat of paint…same problem, just in different areas. The entire piece alligatored randomly. WTF!!! Temperature…nope…humidity…maybe. But I had the same problem when I painted on a drier day. So who the heck knows. Like I said, I had this problem sometime back on another project.

The Kilz is what is actually crackling…not just the paint. I contacted Kilz and they swear they didn’t mess with the formula and were as stumped as I was.

My solution….well I had to sand the entire piece down, paying close attention to the areas that “alligatored.” After everything was smooth and clean again, I used Bullseye 1-2-3 Primer, let it dry well, sanded, and tacked. Sprayed on the paint and presto-bingo…perfect.

Kilz was kind enough to send me a replacement can of primer. Yippee…somehow I guess that is suppose to make up for two days of grief and cursing.

So now my “KSTP” process will become “BSTP” …eck…not really a good acronym…but I hesitate to use Kilz if it really is the only common denominator in this little disaster. Since no other factors seemed to affect the out come, I can only assume it is the culprit.

Who knows…but from now on I can’t say that Kilz is the be-all end-all of primers when painting furniture.

Sorry guys!

Swing pergola tutorial...

With spring just around the corner this is a great time to revisit one of my favorite tutorials. An AWESOME outdoor project that takes a bit of muscle but not a lot of brain power.

This swing pergola is a “MUST HAVE” in any yard…so break out a few basic tools and follow THIS tutorial so you can impress your friends and have a great place to nap in the warm summer days ahead!!!


Sparking "joy" and my thoughts on purging....

Marie Kondo,…founder of the KonMari method ….an “organizational guru” who is all the rage now thanks to her Netflix show.

Her book, “The Life Changing Magic of Tidying Up” is worth the read…if nothing else it may inspire you to get off your butt and get organized!

I follow her methods to some extent…but I kinda get hung up on the “verbage.”

Tidying up is what I do before I go to bed at night…pick this up, put that away, wipe the counter down, blow the cookie crumbs off the table. ( I shared here how I keep my house “clean” and I love this blog article on “tidy people.”)

What she refers to as “tidying up” is what I call an all out “purge assault.” It is when I empty out the entire drawer, closet or dresser and toss stuff i have to think about for more than 3 seconds…none of this “does it spark joy” thing. If I have to think about it’s usefulness or importance for more than 3 seconds it’s a goner!

Joy…I actually “googled” the definition of joy…

Dictionary result for joy

/joi/

noun

  1. 1.

    a feeling of great pleasure and happiness.

    "tears of joy"

    synonyms:delight, great pleasure, joyfulness, jubilation, triumph, exultation, rejoicing, happiness, gladness, glee, exhilaration, ebullience, exuberance, elation, euphoria, bliss, ecstasy, transports of delight, rapture, radiance;

I guess you could say there are some innate objects that can “spark joy.” But truth be told, I am going to save that “sparking joy” feeling, in the true sense of the word, for more important things…like important people in my life…because they are what bring me “great pleasure” and true happiness.

A casserole dish…not so much! I can honestly say there is not one word in the definition of joy that describes my feelings towards a casserole dish…or a highlighter pen…or even a comfy pair of shoes.

Do I NEED a casserole dish…yes…does it “spark joy” when I hold it? Probably not.

When I cleaned out my kitchen cabinets

…I found FIVE identical casserole dishes, two of which were missing lids…the question for me was not “do they spark joy” but rather WTFrick! Do I really NEED five identical casserole dishes, two of which don’t even have lids. If I have to think about that for more than 3 seconds, the answer is no…so then I start working my way down. Four? Three? Two…yes in less than 3 seconds, so three of them got tossed (tossed meaning donated in this case!)

If you think three seconds is too short of time to make such a profound decision, ask your husband if he loves you. What would your reaction be if he hesitated for three seconds?

I truly believe if innate objects spark “joy”…if they give you feelings of “delight, great pleasure, joyfulness, jubilation, triumph, exultation, rejoicing, happiness, gladness, glee, exhilaration, ebullience, exuberance, elation, euphoria, bliss, ecstasy, transports of delight, rapture, radiance”… you may need to reevaluate what is important in your life.

People…your spouse, your children, your parents, you siblings, your dear friends…this is what should “spark joy.” And I kinda have to throw my pets in there too…as frustrating as they can be at times, they do bring me “joy".”

Yes, I believe our homes should spark feelings of happiness…peace…serenity…and even joy. But I BELIEVE it should be the “whole of the sum”…not individual little “things” that spark those feelings.

Look at (or even imagine) the perfect vignette in your home…maybe a reading nook…a perfect, comfy chair with a perfect little table decorated with beautiful little knick-knacks, perfect little throw and pillow, plush little rug, a reading lamp with the perfect bulb for reading…the walls around it are decorated with beautiful botanical prints…this space does indeed “spark joy.” But is it the WHOLE space…or is it each little individual element?

If my house was on fire, would I save members of my family and pets or my “stuff?”

So how do I stay organized?

I use the “pile method.” When I was a teenager my mom went in my room and emptied EVERYTHING into a big pile in the middle of the floor…then told me I wasn’t doing anything until the pile was sorted. Ugh!!!

But you know what, I find the “pile method” works wonders…I empty the entire master closet (or kitchen drawer or makeup drawer or dresser) into a huge pile in the middle of the floor…EVERYTHING!!

First, I use this opportunity to really deep clean the empty space.

Then I start working my way through the pile.

And remember, if I have to think about something for more than 3 seconds, it gets tossed!

Trash…sometimes the “stuff” is just plain ole’ trash. I watch those “Hoarder” shows and my first thought is IT’S JUST TRASH. Now, if you have some weird attachment to what is obviously “trash” I am going to strongly suggest you get some professional help.

How do I define “trash?” Anything a NORMAL person would not want. I have a lot of paint clothes….when it is time to get rid of it, I ask myself “Would a normal person want a landscape company t-shirt covered in paint?”

Trash.

When I am purging, I always keep a “hesitation bag.” You know, that stuff you just aren’t sure you want to get rid of…the jeans you hope to someday wear again, the sweatshirt your son brought you from his vacation 5 years ago, those dishes your mom gave you for Christmas that have a fancy gold rim so you can’t put them in the microwave or the dishwasher.

Dang…do I REALLY want to get rid of those things? So I put them in my hesitation bag/box and set it in the garage. In about 2-3 weeks, I pick it up, put it in the car and drop it off at the donation center….every time! (Don’t forget to get a receipt!)

And you know what…not one time have I regretted it.

There are also those items that really don’t need to be in the space you THINK they should occupy. I have small kitchen appliances I rarely use…like the three pot slow cooker I use Thanksgiving and Christmas, the blender I use 2-3 times a year to make salsa, the large coffee pot I use 1-2 times a year when I have company. Those are all stored in the hall closet. I have a large pantry in my master closet where I store my office supplies as well as my personal care stockpile…shampoo, conditioner, deodorant, lotion, soap, etc. Things you rarely use do not have to be stored in spaces that may be needed for daily use items, even though that is where you think it is SUPPOSE to go. Don’t be afraid to think outside the box when you are tight on storage space!

My goal is to “purge” at least 1/2 of what is in the pile…whether it be trash, store elsewhere, donate or hesitation. I don’t always hit that goal, but I can usually make a pretty big dent. Everything put back into the space is folded neatly and clean…if I don’t want to clean it or fold it, I probably don’t care too much for it anyway…so it gets donated or trashed!

Also, I am not big on cute baskets, boxes and bins. As I have mentioned before, I like to see what I have…

(Again, you can see here how I “thought outside the box” and moved my pots and pans into the pantry.)

If things are in a box or basket, I probably don’t know what I have. If I have things that need to be organized in a box or bin (like ribbon or cords) I put them in clear storage tubs so I can see what is in there!

The older I get the less tolerant I am of “stuff.” I see all those cute organizational tools like baskets, bins and boxes and I think, “do you REALLY need all that “stuff?” How many serving spoons do you REALLY need, how many coffee cups do you REALLY need, how many RCA cables do you REALLY need!

I just don’t think “stuff” should “spark joy” in the real sense of the word.

Like everything else, I say DO WHAT WORKS FOR YOU! Read the book and try this method of “tidying up.” It is a simple little read and like me, you may find motivation to “tidy up.” If the process works for you, GREAT!

If this methods gets your life and home in order, I am all for it. Because in the end, a home that is your haven, the place that brings you peace and serenity, THAT is something that sparks joy!

Another MCM dresser makeover!

This is not a dresser…this is a chest of drawers. I think there is often confusion, and I am the world’s worst at referring to a chest of drawers as a dresser.

There is a difference!

But seriously who cares…lol!

Regardless of what you call it, it was A MESS! But oh the potential.

My very first love…MCM pieces. It would take a month of Sundays to link to all the MCM pieces I have refinished…just search MCM or mid century on this site. Truth be told I would have kept every one of them if I didn’t have a fear of being featured on Hoarders. So I find pieces I love, give them a good little makeover and am sincerely happy when someone else gives them a good home.

In spite of all it’s flaws, I loved this piece. It had the normal wear and tear, a seriously cruddy finish, a chipped wood handle (aren’t those wood handles AMAZING!!!!) and what I THOUGHT was some stains around the hardware on the top drawer…turns out it is a beautiful wood inlay. But you couldn’t really tell because the finish was so icky. (The missing knob was in the drawer…yipeee!)

Let’s be honest, we will all have a pretty worn finish after 60 years on this earth!

My first thought was to paint the wood handles an accent color so I could repair the chip. My daughter suggested I just strip them first. So glad I listened to her. I used this process to strip the drawer fronts, handles and legs…the old stain came off the wood handles and revealed a beautiful white wood (oak, teak? Couldn’t tell)….LOVE!!! I sanded the chip down…and you know what, I can live with it….it is obvious it isn’t the way it is suppose to be but HEY…this is a vintage piece and vintage pieces are going to have a few boo-boos!

The drawer fronts and base were stripped and oiled, the cabinet was given a KSTP treatment (Kilz, sand, tack and painted with white high gloss enamel)

(After I took the pictures, I saw the VERY fine over spray on the top drawer…curses…a little mineral spirits cleaned it right off!)

Personally, I love the high contrast of the wood handles and walnut veneer. The Lane Acclaim tables I collect have the same stark contrasting wood detailing when I refinish them…LOVE!

Often vintage pieces would have been stained and finished so all the differing woods and the entire piece had a “uniform” look and the grain detail was toned down a bit. I say LET IT SHINE BABY!!! If you are a “purist” and want vintage pieces to reflect their original state, you probably don’t want to use the processes I use to refinish pieces!

I am all for exposing the grain and the natural color of the wood.

And I am all for bringing the old pieces back to life!

MORE makeovers...

Surprisingly I have MORE makeovers to share. The weather has been fairly cold and dreary but we have had enough warm days here and there to get a little work done. I get kind of lazy during the winter months…when it is cold and dreary I like to curl up and read. When it is warmer, I NEED to be out working…either at the apartments or on projects.

This first dresser makeover is something you could pretty much do inside on a cold day.

The only thing I had to take it outside to do was distress and seal. But honestly you could do both inside.

I use latex paint for my chalk paint recipe (5 tbs. of Plaster of Paris, 3 tbs. of water, mixed well, then add 2 cups of flat latex paint) and that can used inside.

To do a “wet sand” you would use a sponge with a scrubby on one side…something like this…

After the second coat of chalk paint, before it has thoroughly dried, you would take your sponge, wet it (DAMP NOT DRIPPING!) and start “scrubbing” the areas you want to distress…kind of like dry sand distressing. Keep a bucket of water on hand to rinse the sponge periodically. Doing it like that cuts down on the “dust” created when you dry sand, so you can do it inside.

Then I just seal the entire piece by brushing on a polycrylic (or wax if that is your preference.)

Rather than spend the money on all new hardware, I painted the existing hardware. I use a spray primer and spray paint so that needs to be done outside…but truthfully, you could live with the existing hardware until warmer weather…or just replace it.

But all in all, you COULD do this entire project inside…and it is well worth the time when you consider how much better it looks!

This next piece pretty much had to be done outside on warmer days…I wanted a high gloss lacquer finish on the cabinet and that entails spraying. And I wanted to strip the old finish on the drawer fronts and that definitely has to be done outside.!

I removed and labeled each drawer…that is a MUST because the drawers need to go back into their original position…just mark the underside with a pencil.

I removed the old finish on the drawer fronts using THIS process! I know I refer back to this tutorial a lot, but it is the BEST way to remove old finish or paint…it works and on projects like this, it probably only took me about 30 minutes to remove the old finish on these drawer fronts. Once the old finish was removed, I applied three coats of tung oil finish, rubbing with 0000 steel wool and tack cloth between each coat.

I sprayed the “cabinet” with Kilz, sanded and wiped with tack cloth, and then sprayed 3 LIGHT coats of white lacquer (KTSP).

As you can see from the “before” picture, it did not have legs…but it would have originally and there was even places on the underside to screw in the legs. I ordered new legs HERE and stained them to match the oiled drawer fronts.

Each is completely different and each required a different technique…but both were relatively simple and make a huge impact.

AGAIN, I am sharing how easy it is to do this because AGAIN…

LIFE IS TOO SHORT TO LIVE WITH UGLY FURNITURE!



Just ANOTHER makeover!!!

A few weeks ago I promised to share some of these makeovers….

I shared the details of this one….

here….

It sold in a couple of days!

This chest was a mess…

It is solid wood and pretty sturdy. A few of the drawer tracks needed some minor repairs but all in all it was a decent piece…just super ick.

Again, I have to have my “wood fix.” Since the drawer fronts were solid wood, I decided to use gel stain on them.

First I removed all the old hardware and gave the entire piece a good cleaning with a mild detergent.

There is no need to remove the old finish when using gel stain…maybe a light sanding to remove any boogers and dull the shine on the existing finish.

I ONLY use General Finishes brand gel stain. I applied three LIGHT coats with an athletic sock over a rubber glove, allowing each coat to dry overnight. The first coat will look like crud, the second will look a tad better, the third coat looks awesome. I sprayed on polycrylic to seal them. General Finishes has a wipe-on poly and it is pretty awesome…but I had polycrylic on hand so that is what I used.

I sprayed the “cabinet” with Kilz, sand, tack and latex paint (KSTP). I ALWAYS use an additive with paints I am going to roll and brush…Flotroel for latex.

New hardware…and PRESTO….

Another piece saved from the clutches of ugly and dated!
I share these makeovers to remind you….IT’S NOT HARD to take dated, ugly furniture and turn it into something you will be proud to have in your home.

Life is too short to live with ugly furniture!

Another antique chest makeover...

I promised last week to share all the dresser and chest of drawer makeovers I have been working on. This time of the year it is tough to get a lot of work done over several days because of the temperatures…fortunately this dresser was one I could work on inside.

Takes a little “strategizing” to figure out what I need to do outside on warm days and what can be done inside on cold days.

I knew I was going to paint the cabinet so I managed to get it (and a few others) Kilzed on a warm day. I try to avoid using Kilz inside because it is SUPER stinky…and I like to use the spray kilz on smaller pieces and that can’t be done inside. Sanding and wiping with tack cloth can be done when it is a tad colder so no biggy. I had to strip the drawers and top outside, but that can be done in the cold as well. I was able to bring everything inside to oil the drawers and top and paint the cabinet!

Again, this one didn’t need any major repairs…the only real boo-boo was one missing handle. This hardware was one of the most unique I had ever seen….not only the style but the fact that it was installed “vertically” vs. “horizontally.” Different…I like…so I was determined to use as much of the original hardware as I could.

I removed all the hardware. First I primed them with “metal primer” then I sprayed them with black lacquer.

Since one of the handles was missing and I knew there was NO way I was going to find a replacement, I decided to remove the handles on the top two drawers and replace them with knobs.

That meant the holes in the top drawers had to be puttied…and there is no good way to “disguise” putty holes without painting…but the wood on these drawer fronts was so pretty I really didn’t want to paint them!

The drawer on the right has been stripped…the drawer on the left has not. I just love how “clear and clean” the wood looks after removing the old finish (I used THIS process! Super easy!)

I decided the best way to disguise the puttied holes was to paint a stripe down the drawer fronts. I did this BEFORE applying the tung oil finish.

The stripe needed to be pristine…absolutely NO bleed through…and we all know how tough that is! I read a few tutorials on preventing that…some suggested using modge-podge…one suggested using caulk. I went with the caulk suggestion and it worked like a charm.

I used blue painter’s tape to tape off my stripes, then I ran clear LATEX (NOT silicone) caulk along the edges of the tape….

Then I used my finger to “mash” the caulk along the edge of the tape and wipe off any excess. WORKED LIKE A CHARM! Zero bleed through! I used clear caulk so any caulk that bleed through didn’t show!

I painted the stripes and cabinet. I used a grey latex I had on hand. I added Floetrol…ALWAYS add a paint additive…Penetrol for oil based paints, Floetrol for latex. I use a 4”foam roller and a high quality brush to minimize brush strokes and roller marks. And again, always apply 2-3 LIGHT coats to avoid drips and runs. I oiled the drawer fronts and top with 3 coats of tung oil finish (sand and tack between coats), drilled new holes for the knobs and reattached all the hardware and PRESTO!

Cute as a bug’s ear and super simple!

I just love bringing these pieces back to life!!!!

Antique dresser makeover....

It’s no secret that this antique dresser is really not “my style.” But I knew it could be beautiful with just a little work…

Okay, so it needed A LOT of work!

One of the first things I do when I buy an old piece like this is really examine it and figure out what, if anything, needs repairs and what is “salvageable.”

It would have been super easy to just slather the whole thing in paint, but I love the combination of paint and wood tones…and if I can salvage any of the wood by refinishing rather painting, I’m going to.

The drawers were in excellent condition…they were intact and they did not “stick.” The only real issue was the missing veneer on the front of the cabinet….a little wood filler and sanding fixed it right up.

The top was in relatively good condition…it did have a few “blemishes.” I have “fixed” blemishes using oxalic acid and it works wonders on solid wood surfaces. But this top is a wood veneer and I haven’t had as much luck on veneers…so I just “embraced” the blemishes and let it be what it is…an old piece with a history.

The drawer fronts were in mint condition…just super yucky. The top and drawer fronts were easily stripped using the 1/2 acetone and 1/2 lacquer thinner mixture. I scrubbed them with #2 steel wool and the mixture, wiping with old rags from time to time. After all the old finish was removed, I “washed” them with mineral spirits and applied three coats of tung oil finish, rubbing with 0000 steel wool and tack cloth between each coat. No stain, just a clear finish!

Rather than refinish the “cabinet” I chalk painted it with homemade chalk paint. My recipe for chalk paint is 5 tablespoons of Plaster of Paris and 3 tablespoons of water, mixed well. Then I add 2 cups of flat paint. I painted two coats and distressed, then sealed it with polyurethane. Again, I do not wax over chalk paint…I just don’t think it is a durable finish.

I was SUPER pumped that ALL the original hardware was there…even the top drawer knobs. They had been replaced but the original knobs were in the drawers…major score! They are just so unique and authentic!

Often the stain is mixed into whatever finish is applied. They did this to make the piece look “uniform.” When you strip the original finish, there is a good chance you are going to strip the original stain color…you WILL see the wood grain and there is a good chance the “color” of the piece will be different. For example, the drawer fronts on this piece were a different tone than the top when all the old finish was stripped away…personally I LOVE this look! But if you want that “uniform” look you need to be prepared to stain the piece…and since different woods stain differently, I would suggest using a gel stain application…that is the only way to ensure a “uniform” look. Or in this case, you could paint the top and only leave the drawers original. To each his own!

This is just one of many I shared on Instagram…and there are even more that aren’t pictured here. Over the next few weeks I will share how each dresser’s makeover!

Each one required a different process to bring it back to life!

Stay tuned!