HAPPY BIRTHDAY KATIE!!!! Tales of a teenagers room...

First, I want to say happy birthday to my baby girl! Seventeen...wow! I can't believe you are 17!

In honor of her birthday, I am going to share her room. She is a teenager so it is rarely this organized and clean! But it is her creation and she loves her "stuff" and her space.

I featured the mural on Katie's wall here....and her "unstuffy" wing back chair here. Since we remodeled her room, she has added a lot of her own touches that make the space her own.

As with most teens, her room in a constant state of OH MY GOSH...CLEAN YOUR ROOM!!!! Dirty dishes, dirty clothes in the clean clothes basket (with the clean clothes still in it!), make-up and hair covering the floor and trim, dust bunnies EVERYWHERE! Just a mess.

She is a busy girl. She is an outstanding student (4.2 this last semester...she rocks), she works part-time and she was the lead in the spring musical. (Seriously, the girl has some crazy chops!)

So in spite of all my pleading, begging and bribing, her room stays in a constant state of "mess." Usually the result of just too much "stuff." So a few weeks ago, I decided to take action and tackle the mess.

Since it was in a half-way decent state, I decided it would be a good time to share pictures of ONE of the rooms upstairs!

I also came up with an idea that MIGHT give her incentive to get rid of "stuff." Keep in mind, kids lack the ability to organize and like most of us, they hang on to stuff that they really don't need or want any longer. It is important to "purge" on a regular basis!

I left this bag on her trunk. I told her I would pay her $20 for every large trash bag she fills with clothes, shoes, books....stuff! What many don't know is you can donate "stuff" to your local non-profit thrift store (Salvation Army, church organizations, etc) and get a receipt for a nice tax deduction. So $20 for a bag of things they no longer want or need benefits both you AND your teen...you get a nice little tax deduction and they get pocket change (or gas money!)

Younger kids can be enticed into "giving" their unwanted toys to kids who NEED them. Start them young!

I have learned that teenagers tend to be a bit more myopic and aren't as eager to clean out closets and drawers for the benefit of those in need...sad, but true! They want hard, cold cash!

So far I haven't seen the bag...we'll see. This is why I don't give parenting advise.

Info

Comment

Bedroom makeover...part 2? 3?

I don't know how many times I have griped about my master bedroom. So this past month I began chewing away at a few little things I dislike.

It is my favorite room in the house AND my least favorite. My favorite because it is an awesome room...big, bright, cozy. Least favorite because after 13 years, I STILL haven't decorated it the way I REALLY want it.

I blame it on the furniture.

Ornate, heavy, dark, veeeery traditional! I paid entirely too much for it, so I can't bring myself to get rid of it. One bad thing about furniture...no matter how much you paid for it, chances are you are only going to get pennies on the dollar.

There are a few pieces I would never get rid of...my dad's walnut chair and my grandparent's old trunk. The rest of it...honestly, if I had unlimited funds, it would all go.

But I don't...so it won't. The next best thing is to change it up a bit with a little bit of paint!

I featured the beside tables and the high boy here!

The next big project was the bed!

Honestly, this set would be perfect for a chalkpaint and distress treatment. I painted it with Kilz and sanded it and it was so cool looking. But alas, that is not my "thang" so I just went with my go-to Valspar Dune color.

I did finally paint the top of the Duncan Phyfe drum table...bye, bye beautiful mahogany!

I still need to do some kind of little vingette around this table...in time!

I'm not real thrilled with the bed. I had originally planned on painting all the raised part of the head board and just leaving the inset stained but Brian talked me into just painting the top scrolly part...which is really the part I disliked and it seems the paint just highlighted it. (See, I take his advise!) Oh well...it is different and that will do for now!

I also picked up this darling little antique fan at an auction. I'm not really into "froo-froo" stuff just sitting around and eventually it will probably go to one of my flea booths. But I like the color and retro style and it looks kinda cool on top of the highboy...for now! Until I have to dust it!

Now that all the furniture is painted, I REALLY want to install hand-scraped laminate flooring. And I really want to reupholstery the big chairs. Someday!

I found this AWESOME color chart on Pinterest....

I have some white and tan in the throw pillows and bedding but the majority of my white is a little more "off-white" and my walls are more of a "cream" than a tan. I can live without the grey...I like black better. But the blue is the color of my fireplace wall and I am itching to throw the cranberry color in there somewhere. Maybe in the upholstery on the chairs or a large rug on my new floors!

The paddle fans? Hum...might have to do a little a little paddle fan treatment!

So much I WANT to do.

That is one thing one has to understand about home decor. Unless you have A LOT of money and can afford to have a professional designer come in and do it top to bottom (my choice would be Candice Olson!) the best approach is a little bit at a time.

Don't be afraid to buy used and do a little work to make it your own. As much as I disliked this furniture when it was all stained and matchy-matchy, I'm kind of digging it now! Still want something different, but I like it a lot more now than I did two weeks ago! The floors will come in time and I know someday a piece of upholstery fabric for the chairs will "speak to me" ...someday.

I always tell my kids...it's a good thing we don't have a lot of money...think of all the great things we would never have learned to do had we had the money to pay someone else to do it!

Seriously how much personal satisfaction could one get from having a bazillion dollars and being able to design, built and decorate your "dream" house without concern for costs?

See what paint fumes do to you....

Info

15 Comments

Precious little metal "ice cream" chairs before and after!

I bought these pathetic little chairs at an auction last fall....

...neglected for who-knows how many years in an old outbuilding. Rusted, rotten...so sad.

Then they were neglected for months in my garage because of the "rust issue" I just had no desire to tackle. But I did...and truthfully, it is not that big of a deal (check out how to deal with rust here)....

Then they sat in my garage for ANOTHER month.

They are so darling and I knew I wanted to do something bright and fun with them...I just didn't know what. I get serious mental blocks on upholstery projects!

(I can always tell how long a "project" has been around just by the grass...in the "before" pictures my bermuda is dormant...now it is lush and green and needs to be mowed twice a week!)

So I went to the fabric store and found the brightest and most colorful fabric I could find!

Red for the frame...red is cheerful and fun and since the fabric had every color imaginable, it was perfect!

After dealing with the rust and giving them a good dose of primer (and of course the primer had to cure for a month while I mulled over colors), I sprayed the frames with red spray paint. I cut new seats and backs out of 3/8" plywood and covered them with new batting and the bright fabric .

Here is a little hint...if the "frame" where the back goes is 11", do not cut a new board 11", cover it with new fabric and batting, and expect it to fit. It won't.

The big button (almost) dead center in the flower was a fluke! The original back had a big button and I knew I wanted a button.

So this gives me the perfect opportunity to share how to make buttons for any project...chairs, pillows, headboards! Anything that has or needs a button...you can MAKE one out of any fabric!

Just buy a button kit...they have them at the fabric stores and most hobby stores. There is a template on the back for the fabric cutout and they come in all different sizes....

They are super easy to make! Just follow the directions on the back of the package!

TIP...put a dab of hot glue on the back of the front of the button before you hammer the back on and then put a dab of hot glue on the little U hook on the back of the button. A few times the back has separated from the front or the little U hook has come off the back...the glue just reinforces them a bit!

To attach the button, I measured and located the center of the board, drilled two small holes, threaded wax covered string on a large upholstery needle from back to front, through the front padding and fabric, slipped the button on the string, then threaded it back through and tied it off. Then I put a little dab of hot glue on the knot. Super simple!

I padded the back with a little batting and covered it with red fabric!

I love these little chairs...if I had somewhere to put them, I would keep them! Darling!

When I step outside my comfort zone and go with bright and colorful, I am never disappointed...maybe I should take that into consideration next time I makeover something I intend to keep!

And here is a little "upcycle" hint. I had an old outdoor chair cushion that was thrown in a pile of things I picked up at an auction. The fabric was crud but the batting inside was good. I took the fabric off and used the batting that was inside for this chair and saved the rest for future projects. Free padding!

Info

10 Comments

Nasty little chair makeover...PART I!

My INTENT was to get this chair done this week so I could feature it. The weather and a bum back kind of slowed me down. But I got it done...but I am still going to break this up into a "Two Part Series" because the work that had to be done was pretty extensive. If you just want to see the before and after, check out Part II and scroll to the bottom!

This gives me a great opportunity to stress the importance of TAKING YOUR TIME and DOING IT RIGHT!

The simplest little makeover takes time. You can't rush the process. Strip it properly, sand it properly, prime it properly, paint it properly! Otherwise you are wasting your time and money!

My newest project is very similar to a chair I did for Sis....it was one of my first "features" here. (I wish I had taken better pictures to show all the detail!) The paint part was a tad easier because it didn't have to be stripped first. But it was one of my first upholstery jobs, and the more experience you get, the easier it is. Okay, it doesn't get easier...you just know it is going to be a challenge.

One thing I have learned about upholstery...no two pieces are the same and ALL have their challenges. You learn to be creative, take your time, and use the proper tools...more on that when we get into the actual upholstery process!

I spied this pathetic little chair sitting outside an apartment...obviously it was being neglected and unloved! And then it was abandoned! So I tossed it in the back of my truck and brought it home. As with most projects, it sat and waited for inspiration (and time).

I know many tout the virtues of chalk and plaster paint. No sanding, no prep, no prime. But 1) I am old school and 2) the paint on this chair was literally crumbling off and I could scrape the white paint off with my fingernail!

I wasn't going to risk painting this chair only to have the old paint flake off! Besides, I have to have a nice smooth "template." So my best bet was to strip, sand, prime and paint.

First I had to remove the old upholstery. I'm not sure what is worse...a seriously botched attempt to "cover" the old upholstery or doing so and leaving the old upholstery intact. Which means I had to remove the 8,324 staples someone used to haphazardly attach the disgusting green fabric and the 6,352 upholstery nails (these are just estimates) used on the original disgusting fabric.

Regardless of what you are removing...good or bad...I always suggest taking TONS of pictures while you deconstruct. You THINK you will remember how something was constructed, but you may not. It is always good to have pictures to refer back to! When I took my first shot at reupholstering a chair I took hundreds of pictures as I deconstructed it...boy was I glad later when I got stuck on something and wasn't sure what to do! I just referred back to the picture of the original and I knew exactly what I needed to do!

After hours of pulling, prying and cursing, I was down to bare bones (both the chair and my hands!)

Once I got all the old upholstery off, I addressed the little "wobbles." This chair was in pretty good shape structurally but it is important to make sure all the joints are secure and tight. Glue and clamps! Don't move forward on a project like this until you make sure everything is in tip-top shape. You don't want to be glueing and clamping after you have a shiny new finish on!

Now it was time for a little strip job.

I used Citristrip jel to remove the multiple layers of paint! It actually took 2 applications. An old toothbrush on all the nocks and crannies. I used a mineral spirit wash to remove all the "goo." Then I let it all dry thoroughly.

I know stripping old finish and paint is a tedious, nasty, back-breaking process...and I have no doubt it is the reason someone came up with the idea of mixing plaster and paint. But again, my "old-school" mentality just won't let me move forward without properly stripping all the old paint off.

I don't paint over wallpaper, I don't tile over vinyl, I don't upholster over old upholstery. I just don't. Call me crazy.

Then I sanded....and sanded....and sanded! Getting all the old paint out of the grooves in the legs was not an easy task...but absolutely essential! This is exactly why I always keep old toothbrushes with my shop tools!

After sanding, I primed it with Kilz. I like Kilz for several reasons. For me, it is my personal preference after years of experience. Others swear by Zinsser. This is just one of those things you need to experiment with and do what works best for you! Regardless, I will ALWAYS recommend an oil-based primer!

Nine times out of ten I am going to prime a piece before I paint it. I am not willing to take the risk of "bleed through", I want a smooth finish and I want my paint to stick! On rare occasions I will not apply a primer if I am going to use chalk/plaster paint and plan to distress the piece. But even then I prime areas I suspect might bleed through or cause problems.

Anywho, after I got MOST of the old paint off and sprayed on the primer, I let it dry thoroughly. Then I sanded, and sanded, and sanded...again. I started with a 80-120 grit, and finished with a 220.

I like to sand. Or rather I like how the piece feels and looks after it has been primed and sanded. And in my opinion, "feeling" is the key!

Funny story...years ago I was feeling quite smug about the fact that I had not gotten all those nasty little wrinkles all my friends had around their eyes and mouths and on their neck. Until I put my readers on one day to pluck my eyebrows...and there they were.

Even though I finally broke down and got prescription glasses, I still don't trust my eyes to see all the imperfections...but I do trust my hands. As I sand, I "feel." If you can feel it, it will show through a coat of paint!!! Sanding transforms the piece and if done properly, it can mean the difference between having a piece that is beautiful and professional or one that looks like an inexperienced DIYer threw it together!

After priming and sanding, I used my compressor to blow the dust off and then tack cloth to get rid of all the little smidges of dust and debris! I know I harp on using tack cloth...I can not stress how important this step is!

My original plan was to paint the chair a "blush/salmon/coral" color and then upholstery it in black damask. I saw a chair almost identical to this one in those colors SOMEWHERE...and then I couldn't. What I could find was a lot of teal and damask...and since this is a piece that will be sold, I decided I had to go with what is obviously "in." A "pink" chair can be risky! Pretty, but risky!

So teal it is....

The trick to spray painting anything (besides the prep work) is to do 3-4 VERY light coats...let it dry for 30-45 minutes between coats. If you get a drip or run (which you shouldn't if you do LIGHT coats) let it dry OVER NIGHT and then carefully and lightly sand it with a VERY fine grit sand paper! Tack and then lightly spray it again.

After the paint dries I gave it a good coat of clear poly finish. Probably overkill considering the Valspar spray paint I use SAYS it is an "all in one." Again, I'm old school. You clear coat everything.

The key now is to WAIT. Wait and let the paint dry and cure for a few days. Upholstery can put a lot of wear and tear on a piece so you want the paint to be cured before you begin working on the upholstery.

And as you can see, this piece has some serious reconstruction to do before I can ever begin to put the fabric on! I'll make sure I take good pictures and share step-by-step instructions on how to reconstruct and reupholster this chair!

IF YOU WANT IT DONE RIGHT....TAKE YOUR TIME!

Stay tuned! Part II is on its way!

Info

Comment

Nasty little chair makeover...before and after....PART II

(If you just want to see the "Before and After" just scroll to the bottom!)

Okay, so the frame is stripped, primed and painted....(see part 1 of this makeover here)

Now comes the fun part! Finishing it up with the fabric!

Before we start reupholstering, this chair had to have a little "reconstruction."

This chair had a "spring seat." Some will have wood seats. Those are a little easier, even if you have to cut a new piece of plywood. But this one had springs and the twine holding them upright and in position had busted. And one of the nails holding the brace had popped out. So I had to reattach the brace and then restring the springs. Not a biggy, but something you definitely want to get right or the seat will be all wonky.

I used plain ole' twine to restring the springs and I removed the old nails and put in screws. Just personal preference and besides, if the string broke at any time, it would be a lot easier to remove the screws and start over than pry out nails.

If your chair has springs and they are in bad shape or you just don't want to mess with them, they are easy to remove. You can measure and cut a piece of plywood to put down in the base of the chair. Then screw the plywood on the frame of the chair and proceed with new foam and batting.

After fixing the springs, I covered them with a scrap fabric I have in my stockpile (I buy sturdy fabric at garage sales just for this purpose) and stapled it to the top of the seat frame. You can also use muslin or burlap. This fabric holds the springs in place and provides a base for the foam. Again, this is not something you would mess with if you have or add a wood seat base.

Next, you want to measure and cut your new foam. I used 2" foam.

TIP: A few years ago I read a little tip about using an electric bread knife to cut foam. I happened to stumble across one for $1 at a garage sale. For years I have used a utility knife and scissors to cut my foam. Man oh man....I can not tell you how easy it is to cut foam with a bread knife...it is like cutting butter and your cut is as straight as a factory cut....total awesomeness! Why I didn't try this sooner is beyond me...typical "old school" stubborness. Live and learn!

After I cut the foam for the seat, I covered the foam with the scrap fabric and stapled it to the frame as well. Again, just to hold the foam in place and give it a smooth structure.

TIP: Many people try to reupholster using a manual or electric stapler. Forget it. I don't care how hard you try, a plain staple gun (manual OR electric) is NOT going to work. Old wood is just too hard for the staples to set well and you will spend half your time hammering the staples in...provided your hand doesn't fall off first. I STRONGLY recommend getting a small compressor and pneumatic staple gun. You won't regret it! It is one of items I highly recommend in my "Every Woman's Tool Box." Perfect for this kind of project!

The back of this chair is rather simple, but it needed new webbing and support. You can buy burlap upholstery strapping specifically for this type of project, but since I had some scraps of burlap on hand, I made some straps...I just folded it, ironed it and then stapled it place. Just make sure it is taunt. Then I covered the entire back with the scrap fabric to give it a little more support....

Then I covered the back of the chair and the seat and frame of the chair with quilt batting. I use plain ole' quilt batting you can buy at the hobby or fabric store. Just staple the batting to the underside of the frame.

I picked up several rolls of batting after Christmas for 90% off...80 cents each! It doesn't have the "loft" of quilt batting but it works great on places where you want more structure than loft, like on the back of this chair.

Now comes the fun part...actually covering the chair!

Before I began applying the fabric, I made sure I had the piping I wanted to use ready to go. I provided a little tutorial on how to make piping here but you may be able to find a better tutorial online. Use the one that you understand! I HIGHLY recommend using prepackaged bias tape rather than trying to make it out of the fabric you are using. Mainly because you have to cut your strips of fabric "on the bias" which means at a 45 degree angle across the width of the fabric...that takes a lot of work and a lot of fabric. Bias tape comes in a ton of colors! In this case I am using black pipping with a black and beige damask...nice contrast and super easy to make. You can also buy premade piping or trim, but honestly it is a tad expensive.

Speaking of fabric. You don't have to use upholstery fabric but you want to make sure you use a very sturdy fabric. In order for an upholstery job to look "professional" you will be stretching it very tight and stapling it and if you use a light-weight fabric it can easily tear. The least expensive is duck fabric...you can find it at Hobby Lobby or most fabric stores. It is the lightest weight fabric I would use. I have also used drop cloth fabric and it works pretty well!

I usually start with the back of my chair...only because in my opinion it is the hardest and I want to get the most frustrating part over first. Just my preference!

There are a few areas that are a little tricky. One is the arms...here is a little "picture tutorial" on how I deal with this....

To cover the "gap" created by cutting around the arms, I inserted a little "filler" piece. I just folded down and iron the side adjacent to the arm, put a little fabric glue on the back, and stuck it on the chair and stapled. Then I wrapped the front fabric around the sides and stapled it to the back.

I wrapped a double welt trim with fabric glue on the back around the arm and over the fabric where I cut it...and then stapled it to the back to secure it. Here is a great tutorial on how to make this welting. You will notice that the tutorial shows how to make it out of the upholstery fabric. Again, I recommend plain ole' bias tape! If you can sew a straight stitch, you can make this. If you can't, you can purchase it at the fabric or craft store! You won't need a lot for this type of project.

This may seem like a tricky thing to do....patience. Take your time and THINK. And if you stripped the original upholstery and took lots of pictures (like I told you to!) you will have a great reference on how it was originally constructed. It really isn't as hard as it seems! The most important tip I can give at this point (other than be patient and work slowly) is make sure you keep your fabric pulled tight before you staple!

Cover the front first and staple it to the back of the chair. After you have covered the front of the chair, you can add your piping by stapling it to the back of the chair, circling the entire edge.

You may have noticed that this chair has a really pretty curve. There is NO substitution for PLY GRIP. In order to upholster a chair, you have to have it. And you don't need a lot....just enough to go along the top of the chair because it is the only place you will use it. I can tell you craft stores do not carry ply grip. When I reupholstered my wing back I stopped in an upholstery shop and bought about 5-6' for around $1 a foot. When I decided to get serious and do a few more projects I ordered a large roll online from DIY Upholstery Supply. I got 100 feet for $14.00, plus shipping. This site is a great resource for all things upholstery!

In this picture you can see how I stapled the trim around the edge. Then I stapled a little batting at the edge of the trim. Then I applied the ply grip.

This stuff "bites" so be careful. It comes with little holes in it so that you can use upholstery nails, but I just use my pneumatic stapler and staple it on, making sure that the edge of the ply grip is pushed tight against the piping. You only apply it along the top of the chair and about 1-2" down the side. It is very flexible and very easily follows the "lines" of the chair...whether it is curved or straight!

I attached the back fabric along the BOTTOM first. I used upholstery cardboard tack strip to get a nice crisp line. Then I stretched the fabric to the top and shoved it into the ply grip with a putty knife. Start in the middle and work you way to the edges...keep the fabric pulled tight as you work it into the ply grip.

After you have the fabric pushed down into the ply grip, make sure there is no fabric ABOVE the depth of the grip...if there is, just trim it off. Then take a hammer or rubber mallet and tap the ply grip shut. I would STRONGLY suggest putting a piece of scrap fabric between the hammer and the chair as you tap it shut.

As I mentioned earlier, lighter weight fabrics can pose a few problems when used as upholstery. Duck cloth does fairly well with the stress of the tugging and pulling and stapling...but occasionally even it might have a little "tear." I had this happen on the edge of this chair back. A tiny bit of the ply poked through. The only thing I could do (besides start over and that wasn't happening) was dab it with a little upholstery glue to keep it from tearing any more...and then I used a black sharpie to "hide" the little problem. (Again, I AM NOT A PROFESSIONAL!)

Before using ply grip, I strongly recommend spending a little time online googling as many tutorials as you can on how to apply it. You may be totally confused by my instructions...but completely understand another! It really isn't that difficult and seriously makes a huge difference!

"Professional upholsters" use metal tacking strip to fold over the outside edges on the back...not me. I just fold them over and use fabric glue. Probably not the smartest thing to do, but for me it is the easiest...and it holds!

After the top is done, I tackle the seat. In my opinion it is a tad easier. Just lay the fabric on the seat and make sure you have enough all the way around to staple it to the underside of the seat frame. You will have to cut slits on the corners to work around frame, but again, patience...take your time. And keep your fabric pulled tight before you staple. When working with a seat, whether it is a project like this or a simple dining room seat, it is always best to attach your fabric on all four sides FIRST...just put 2-3 staples in the middle of each side, and then start working your way towards the legs.

Also...PAY ATTENTION TO THE DIRECTION OF YOUR FABRIC!! Make sure it is all running in the right direction. I used this damask on another project and discovered that I had applied it "upside down" on the seat. And one time I worked real hard to get a peacock smack dab in the middle of the seat of a chair...only to discover that it was upside down. Frustrating. So check and double check before you start pounding in the staples!

After my seat was completely covered, I edged the entire thing with trim...then I added a simple black fabric to the underside to hide all the innards. I use a cardboard edging on the front of the chair just to get a nice crisp line and then folded the fabric and stapled on the sides and back.

Remember what we started with way back when....

And this is what we have today! Amazing....

Before and After....

This truly is a "trash to treasure!" Now you know why I wanted to rescue the poor little thing!

Info

4 Comments

Updated "antique" school desk and school chair...

Several months ago I went to an auction at a pretty nasty place. Most of the pieces I brought home had to be scrubbed with ammonia.

I bought a little school chair and an old school desk. Did I bother to take a picture before I started working on them? Um, no!!! You would think after all these months I would learn. But often times I bring stuff home, store it and then the first time the temperature spikes above 60, I start tearing into it! And this time of the year, those days are rare!

I did find a picture of the little chair...but the desk was used to prop up the large wood windows I bought so it didn't get in the family photo!!!

So again, it is time to close your eyes and "imagine." For anyone over the age of 40, it's not going to be hard. More than likely, it was the kind of desk you had during your elementary years. Beige formica top, grey metal base and an open shelf for a little plastic pencil box and books.

After both got a good scrubbing, I used "automotive primer" on all the metal. Kilz works well too, but I usually use "automotive" primer on metal. I find it just "bonds" better. I didn't prime the plastic on the seat or the top of the desk.

For the desk top, I used chalkboard paint. Then I sprayed the base with an awesome "teal" color.

For the chair I used a red "plastic" spray paint on the seat. You can buy it at Lowe's and it is specifically formulated for painting plastic. I think any spray paint would probably work but since I needed to buy paint for this project, I went with a paint specifically for plastic. I sprayed the legs with a bright white.

Cute! Perfect for a child's room!

Both of these will be in my booth! (The desk sold in ONE day!) Sometimes I wish I still had young kids so I could do cute little projects like this specific to their decor!

Then I remember that when I had young kids I didn't have time for cute little projects like this!

Info

1 Comment

Not your plain ole' high chair!!!

This is one of my favorite projects for so many reason.

First, I love doing "kid's" stuff...chairs, desks, dressers...anything kids would love!

Second, it was free. Well, the CHAIR was free...the materials and time were a little excessive! But I love the way it turned out so it was worth it! Truthfully, if I paid myself by the hour on the items I repurpose/reupholster/refinish and then sell, I would make about $1.32 an hour...not sure I would even clear that on this chair!

This was another "abandoned" piece I found at my apartments.

And it was N.A.S.T.Y!

Every square inch was covered in nasty gunk!!! But other than the tear in the seat (Duck tape? Seriously?) it was structurally sound. And super neat.... the top of the chair lifts off the base...and the base can be flipped over and used as a desk with a dry-erase top...nifty little thing.

Since the tray was missing and it probably is no longer considered "high chair safe" I decided to spruce it up and make it into a little child's booster chair! Definitely not something you would want to put your toddler in and leave unattended, but sturdy enough for a young child!

First I removed the seat and back and the old tray brackets.

Then I had to clean it! I put it in the tub and saturated it with straight ammonia....

The nastiness just melted off. I can not tell you how disgustingly filthy this thing was and I am sick that someone would put their child in it...just gross.

After scrubbing it with ammonia and steal wool, I let it dry thoroughly and then gave it the ole' KSTP treatment...Kilz, sand, tack cloth and paint.

I decided to spice the frame up a bit with bright red paint. I used a black and white damask with red piping on the cushions. The seat was pretty thin so I added a little foam padding before recovering it.

I painted the dry erase board on the base with chalkboard paint! I'm kind of addicted to that stuff!

Just darling. I just love anything that is "unique."

And while it really isn't safe to use as a high chair, it would make a perfect "kitchen helper."

Info

1 Comment

FINALLY, a chair before and after!!!

I say FINALLY because as I have mentioned I have "upholstery block." I can pick paint, I can pick stain...but I have the toughest time picking out upholstery. Which is becoming a real problem because I have all these chairs in my garage that need upholstery work!

Anywho, I finally picked an upholstery for these little mid century style slipper chairs....

I was a little hesitant to go with something so "funky." But fact is, I don't think these chairs have a tremendous "value" so it was a perfect opportunity to do something fun with a style I love! When I found a "'50's Paris" themed fabric at Hobby Lobby, I decided to go for it. Who wouldn't love the Eifel Tower, 50's fashion and PINK???!!!

The legs were oak...sturdy but not my favorite, so I didn't have a problem painting them....a little primer and black satin spray paint. I added a little batting but otherwise they were in pretty good shape! And really comfy! The chair didn't originally have any piping, but I added a little black around the base of the seat.

I found a black and white diamond pattern fabric I am going to make little pillows out of of...eventually. I stuck my houndstooth pillow on there just to see how it would look...not so great, but I think the diamond pattern will look awesome!

Personally, I think they are pretty cute...we'll see if they sell...

Info

2 Comments

Sit and stay awhile....

I have a thing about chairs and sitting areas...even outdoors. In my yard I have two swing pergolas, two large chairs on the patio, a table and chairs and a wicker settee on the deck, a chair on the little deck outside my bedroom door, and chairs stacked and ready for company.

Funny thing is, I am constantly buzzing around doing something so I rarely just "sit" for long. And it's not like we entertain a lot....

Last month I scored 3 old metal lawn chairs at an auction...I love those things. I have one I bought at a flea market a few years ago and have always wanted a few more. Two of the three are in pretty good shape...minimal rust and still sturdy. One has some "issues" with rust so I didn't do anything with it. And naturally I didn't take "before" pictures of all of them, but this is a picture of the one that I didn't redo....

Even in good condition, these old metal chairs can be a booger to refinish properly. Usually they have been painted a time or two, so you have to sand them pretty aggressively to get rid of all the layers...and drips! They also have rust and that has to be delt with or it will destroy the chair.

I used my little mouse sander with a 40 grit paper, then hand sanded it with a 120 to strip as much old paint and rust as I could.

After sanding and wiping them down with tack cloth, I primed them with automotive primer. I figure if it is good enough for a metal car, it will be great for metal chairs. It is also specifically formulated to stop rust! May be overkill, but might as well use the best! You can buy cans of metal and automobile primer in the spray paint sections at Lowes.

After priming, I hit them again with 220 grit paper and tack cloth. Then I painted the arms and legs with a Rust-oleum satin white and the seats with a really pretty Valspar "peacock blue" color.

I really debated what color to paint the chairs. I love the different greens but my entire yard is green and I try to infuse as many annuals as possible to get color...so I knew I wanted "color."

I like the Peacock Blue. It's pretty....

And while I am showing off my yard, here is a before and after of the area I resodded AGAIN this year. The first two times I put down bermuda but it just didn't do well....too much shade!

It is a little difficult to tell from this photo (my stinking photography skills!) but this area is pretty much dirt with a few blades of grass here and there...and that is after I put down bermuda sod last spring! The rest of the yard is thick, lush grass! (Thanks to weed control and fertilizer by Fairways and lots of water)

So this year I decided to try something different. Zoysia sod. It is SUPPOSE to do better in partial shade areas. I have fescue in an area of my yard that doesn't get a lot of sun and I don't like it because it doesn't go dormant like bermuda...so I have this big green patch in my yard all winter. Zoysia is suppose to go dormant. It can't be any worse than it was. I've decided if this doesn't work I am going to paint the dirt green!

So for now, I have nice grass in our sitting area...and it is a perfect back drop for my pretty new peacock chairs!

This is Molly, my old kitty. She turned 16 this week too! She loves all the "lounging" areas in the yard and loves being outside...as long as it is above 75 degrees!

Someday I will post pictures of all my animals...I think I have already posted one of Simon, but I also have Ms. Kitty (she is a rather cranky, unfriendly calico) and Finley (he is my autistic kitty...another long haired Siamese mix) And then there is Ginger, my old black lab.

Info

Comment

Primitive mahogany chair....

I am always finding nasty old furniture dumped around my trailer and dumpster at the apartments. But when I spied this little beauty sitting by the dumpster I knew it was something special...even in the deplorable state she was in!

When I found her, she was bleached grey/white and was pretty rickety. But I could tell from the construction it was a solid wood primitive chair and from some of the red "bleeding" on the underside, I suspected it was mahogany.

I brought her home and the first thing I tried to do was glue the loose joints. Problem was the wood was sooooo thirsty, it literally sucked the moisture out of the glue, so the glue wouldn't hold!

I knew I was going to have to "moisturize" the chair before I could get the joints to hold.

So I stripped off what little was left of the old upholstery and began sanding her down. As I sanded, the color in the wood really began to shine through!

I called a friend of mine, Caleb, who is kind of a "wood guru." He told me to try Danish Oil on her.

Man, oh, man.

Absolutely breathtakingly beautiful.

No stain in this picture....just oil!

The wood was so thirsty it took an entire can of Danish Oil...maybe 4-5 coats! But the natural color of the wood was amazing!

This is where I need to remind you that I think one of the most beautiful things on earth is wood....I just love the color and the texture and the grain. And the smell!

And it is one reason I have such a difficult time painting over wood....because once you do that you potentially hide something beautiful! Even some finishes can mask the texture of a wood grain...and I hate that!

So I am very careful when deciding what the best treatment is for any piece of wood furniture. Sometimes paint really is your best option. But not always...even if it is all the "rage."

I am sure there are a lot of people who, if they would have even given this chair a second look, would have immediately slapped a coat of paint on her. Because let's be honest, she was pretty nasty to begin with.

But the natural beauty of this chair was there...just waiting for someone to care enough to bring it out!

This is where I really wish I was a better photographer! I am just not doing this chair justice with the pictures!

After oiling and glueing, I set out to find the "right" upholstery. Again, this is a tough process when you are talking about an old chair. I wanted to do something that might resemble what might have been on it originally, but since I have NO idea what time period this chair was, I knew I couldn't even begin to guess. And my research online turned up nothing. I suspect this chair was hand made by someone loooong ago!

The upholstery I settled on is actually an old linen blanket I found at a garage sale. I loved the neutral color and simple texture. Again, I could have painted the piece and upholstered it in a bright, funky fabric....but she is a simple old chair and this is just one of those times I thought the piece needed "simple."

She now sits proudly in my flea market booth....waiting on someone to fall in love with her like I did! But it will take a very special person who will recognize her for what she is.

A VERY special chair steeped in a history we will never know, but will cherish and honor just the same.

Info

Comment