Vacation and the bathroom renovation!

We returned from our vacation last week….AMAZING! One day of floating and fishing the Gunnison Gorge, one day of fishing the Colorado River and five days of beautiful Aspens in all their glory! Sadly, Brian nor I took our phones into the Gorge or I would have some breath taking pictures of some of the most beautiful landscapes this country has to offer. All I can tell you is to go see it yourself! It will not disappoint!

I knew I would have to hit the ground running when we came home. I have an apartment that needs tile repair, a cabinet rebuild and paint. And I found an amazing mid century dresser that has all the problems one might encounter with a dresser and I was excited to do a step-by-step tutorial on properly repairing busted drawers, fixing chipped veneers, stripping and painting.

But Monday the tile guys called and they are ready to start on my bathroom. Since I am too cheap to pay someone THOUSANDS to demo the old tile, I decided to tackle that chore myself with the help of my son, Matt.

And chore it was!!!! My plans to take out the wall tile in sections only worked about half the time…the other half we were beating out little chunks of tile and durrock. My plans to “pop up” the floor tiles went by the wayside when we discovered it came up in small slivers with a mere chisel and hammer.

One of the things I learned from my dad…build it to last a lifetime…and since I installed the tile 19 years ago, it was more than a booger to get up!

Thank goodness for tool rentals. This little “tile-buster-upper” thingy saved us about 2 days of work! Seriously, it was the best $60 I ever spend.

I still had to replace some insulation, add a few studs, do some floor scrapping by hand and I had to hire plumbers to move the drain and rebuild the shower valves. But all in all it is coming along nicely and HOPEFULLY it is ready for the tile guys.

As with all “best laid plans” there is one small snaffu in my plan. I had intended to do a shower niche on each side of the shower head…two shelves in each…like the one in my “inspiration picture.” Unfortunately the layout of the studs and plumbing messed up that whole plan….

…so now I can only put one on the right…que sera! Sometimes you just have to drop back and punt!

I can tile. Not a problem. Here I showed you the new backsplash I installed on the vanity! But I am glad I decided to pay someone else to tackle the bulk of this project. After two days of demo, I’m not sure I could lift a box of tile if I had to!

This is where I want to reiterate the importance of doing what YOU love! Not what is “in”, not what Pinterest says is all the rage, not even what your friends and family think you should do! I am all for “finding inspiration” for home decor and improvement projects, because let’s be honest, sometimes we just can’t find a vision for the changes we want to make. But doing what YOU love is important because otherwise you may find yourself hating an expensive change in the not so distant future!

I still love the wall tile and floor tile I picked out 19 years ago…but I know the day will come when stepping into a big ole’ whirlpool tub we NEVER use may be a major feat…a walk in shower will be, some day, a necessity!

So find your inspiration but do what you truly LOVE!

MAYBE next week I will have time to get started on that amazing dresser and I can share how easy it is to turn a trashed piece of furniture into something you will be thrilled to use in your own home!

Funky little chair makeover and a few upholstery tips....

Another auction buy that languished in the garage for months until I pulled it out and thought..."Hum, I kinda think that is cool!"

It may not LOOK cool, but it is a funky little chair...and I like "different." Not really my style (Hollywood Regency maybe?) but since my style is "eclectic," I can find a place for it! 

I'm not sure exactly what wood it is...my guess is walnut. But the finish was the typical dark stain with black flecks I see on a lot on furniture from the 70's...not really attractive...

 

After I stripped all the old fabric, I used my 1/2 and 1/2 mixture and stripping process to strip the old finish and stain...then I applied 4 coats of tung oil finish (no stain)! I like the warmth of natural wood.

As always, if one comes in, one must go out. So this little chair in my office was moved upstairs into the guest room until I have room in my space at 410 Vintage! I bought it 25 years ago at an estate auction and it was my first real reupholstery project.

Fabric is always a tough one for me...maybe because I know how hard it is to reupholster a piece and I don't want to do something I will tire of and have to redo. I found several fabrics I thought I might like, brought samples home and did what I always do...stare at it for a few days. In the end I went with this fun but somewhat conservative "geo" pattern...I like that it is relatively neutral and could be spiced up with a pillow or throw...

And spice it I did. When I was looking at fabrics I found an awesome pink velvet. I was briefly tempted to cover the chair in the fabric but I knew it would be a "fad color" I would later regret. But I couldn't stop obsessing over the pink so I decided to find a pink accent pillow.

Naturally, I couldn't find a pillow I like so I ended up buying a little bit of the pink velvet and made a little pillow. Instead of cording, I decided to go with tassels on the corners but couldn't find any I liked...so I made little "tufts" out of feather cording...just too stinking cute!

A simple but fun little detail that brings in the pink I was drooling over without the huge commitment of covering an entire chair in it! I would advise taking this approach on all "big ticket items." Couches, chairs, bedding...keep them neutral and add the "fad" details and colors with pillows, throws, curtains and rugs...accents that are relatively inexpensive to change out when the color falls out of favor in a few short years!

By the way, you may have noticed I changed the curtain...I went with white just to lighten the corner a bit!

I could never post a good tutorial on how to upholstery YOUR piece of furniture...there are so many great video tutorials online for just about any style of chair/couch/ottoman/etc and I strongly suggest you do a lot of research before you start your project. Find a tutorial that best suits YOUR needs.

I will share a few tips that will make your job a tad easier. It doesn't matter if you are recovering a chair or couch or ottoman...these rules apply!

First, learn to sew. Every DIYer should know how to use a sewing machine if for no other reason than to sew pillows or curtains or do basic upholstery or even hem a pair of pants. If you don't know how to sew a straight stitch, learn! I was fortunate that my mother made me take sewing lessons when I was young but I know a lot of local county extensions and hobby stores offer cheap (if not FREE) lessons! Take them...learn! And don't think you need an expensive sewing machine...I have a basic cheap machine that is at least 30 years old! 

Start simple. Before you tackle an heirloom wingback chair with expensive fabric, try something simple like this ottoman....

The drop cloth material I used was relatively inexpensive and super easy to sew. And I used a premade bias tape for the cording.

Take your time! I always think a project will take a lot less time than it actually does...so know that reupholstering anything isn't a "rainy day project!" Maybe a rainy WEEK...but deconstructing alone will take time and a lot of patience and you want to do it right!

Take LOTS of pictures while you deconstruct! Just snap random pictures as you strip the piece. If you are like me you THINK you will remember, but you won't...and you will find yourself sitting there wishing you knew how in the world it was originally put together. So take pictures!

It is always good to have a visual reference!

TRY to keep the pieces of the old upholstery intact so you can use them as a pattern for the new. If the old is really stinky and ewwwy, make a "pattern" with them out of butcher block paper or old newspaper. Make sure you label each pattern piece or old fabric so you know where it goes! And keep in mind that the fabric you remove has been trimmed...so add a few inches on each side of the piece...you can always trim after it is attached!

If you are going to strip and stain or paint, do it after you strip the old upholstery but before the new! 

Take time to make repairs! Make any repairs that need to be made BEFORE you start painting/stripping/staining and reupholstering! Do not spend the time and money reupholstering a chair if it wobbles or needs new strapping. If you don't know how to repair something property, Google it! Or email me! And remember, glue and clamps are your friend...not silicone, not sheetrock screws, not nails. Do it right or you are wasting your time!!!

Remove ALL the old upholstery nails and staples...all of them. And honestly, I have bought every tool on the market to make the job easier and I always revert back to a plain ole' flat screw driver, a hammer and a pair of good needle nose pliers!

Which reminds me...wear shoes! I don't care how careful you are, those nails and staples fly all over the place and you WILL find them with your bare feet!

Speaking of tools, I think I have tried every electric and manual stapler on the market. I have found that MOST will not set a staple flush or securely. So now I use a pneumatic stapler, similar to this one.  Best. Stapler. Ever!!!!  But word of warning...don't make a mistake and don't plan on recovering the piece any time soon because those staples aren't coming out!

Alway cover old batting with new. Even if the old batting seems to be in good condition, cover it with new batting. Always! If it has old horse hair stuffing replace it...if it has old "strapping," now is the time to replace it!!! On a few chairs, I have actually stripped everything down to the bare wooden bones and added new everything. Trust me, that is better than getting it all back together and discovering that the seat still sags or is lumpy and it smells!

Buy enough material! When you buy material make sure you account for any piping (welt cording) you might have to make. You can buy premade cording, but if you are going to make it out of the upholstery fabric it MUST be cut on the bias...in other words, diagonal across the fabric. To give you an example, on this little chair, I needed less than two yards for the seat and back, but I needed another yard just so I would have enough to make the welting. Again, google welt cording/piping and you will find great tutorials that will show you exactly how to make it. 

Make sure you have enough fabric to complete the project before you start. Lay ALL your "pattern pieces" out on the fabric and account for the welting before you start cutting. Nothing is worse than getting half way through the project only to discover you don't have enough fabric...and you bought the last bit of it! If all else fails you can always use two different fabrics on the project like I did on these little tuffets...but PLAN for it!

 

Google, google, google. I learned a lot at the elbow of my dad but today we have the world at our finger tips and you can find a good tutorial for just about any project...even upholstering furniture! I always advise watching as many tutorials as you can find and use the one that makes the most sense to you and your project! Watching DIY tutorials is also a great way to decide if you even want to tackle the project...advisable before you buy a wingback chair at a garage sale for $20 with the intent of "learning to upholstery!" 

Until next week when I hope to share Matt's entry makeover...

 

 

 

Organizing one tiny step at a time!

This time of the year the blogs are filled with organizing tips. They are all great but man, can they be overwhelming! 

They feed into our desire to get our lives and homes in order. So I thought I would share a few TINY things I have done in each room of the house that have, in one way or another, made my life a tad simpler. Nothing major or earth shattering...just little things you can do that don't require a pickup load of storage boxes or a week of total madness in your quest to "get it right."

So I walked around my house with my camera and asked myself...what in THIS room makes my life a little easier.

First...my bedroom. Getting my bedroom the way I love it was a looooong process that I revealed here. But there is one tiny element that makes my life a little simpler....

This tiny little change to the outlet next to my bed was super simple to install (here I share how to install one!) and has made my bedtime ritual so much easier. I can still have my clock and lamp plugged in while charging my phone and Ipad.....zero hassle! 

My office...I have a ton of organizing tips for home office spaces, but my absolute favorite is simple...binders!

These are just a few I keep at my finger tips...on a shelf in my closet I also have binders for home and car insurance documents, tax returns, legal papers, etc. Since I have a business, all my receipts and invoices get tossed in a paper box each month and at the end of the year stored in the attic...just in case the IRS comes knocking! Super simple "filing" system! But the documents I need on a regular basis are kept in binders at my finger tips!

The toilet paper holder. Okay, this may seem silly but if you have ever had a puppy, kitten or toddler, you know the struggle....the daily ritual of cleaning up the toilet paper that has been "unrolled!" I discovered this little trick with my last kitten...

Install an "open ended" toilet paper holder vertically rather than horizontally. Not only does it take away the entertainment value of "unrolling" the paper it makes it super simple to replace the roll!

See, I told you these were simple little changes...

On to the laundry room. I have said time and again, I like pretty but it has to have function. One of my favorite little things to collect are the old Lane cedar boxes. Some believe they are old "sample" boxes used by Lane salesmen for their cedar chest line. Not so! They were actually little cedar boxes Lane gave away to girls when they graduated from high school to entice them to buy a large Lane cedar chest. I find them all the time at auctions and in flea markets. A quick strip with my acetone/lacquer thinner mixture and a few coats of tung oil and they are as good as new...and super pretty!

I use one to hold dryer sheets in my laundry room and I also have one on my dresser for reading glasses and such and one in my den to hold the remotes. Pretty with a purpose!

Which brings me to my kitchen. So many neat little ways I have made this space much more functional and organized, but I chose to share one of my few loves that really serve little purpose...my cutting boards....

Here and here I share how super simple it is to revive old cutting boards! Except for the one I use as a recipe holder, they really serve no purpose because I don't use wood cutting boards. But I love the warmth and whimsy they add to kitchen!

In the den a few more of my favorites "with a purpose!" When I started seeing all the "old work benches" being repurposed in the blogosphere I remembered I had my dad's old tool bench stuck back in a storage shed. I pulled it out and gave it a little makeover! It is one of the few "primitive" pieces I feature in my home. Because it was actually built and used by my dad, I LOVE it!!!

It is relatively small and doesn't take up a lot of space and serves as a perfect little side table next to the lounge chair in the den! 

Coffins...again, morbid sounding, I know. But they aren't REALLY coffins, that is just what they are called! I have several and I use them for storing fire wood, photo albums and books!

Another super simple "makeover" project that yields "pretty with a purpose!"

I did manage one major "purge" this year...partially out of necessity. When I redid my entry this year I created a dust bowl that forced me to remove a 30 year collection of hardback books for cleaning and I decided it was time to finally let go! Over 150 books found a new home and my bookcases finally found room to breath! 

I kept the collections of two of my favorite authors but the rest were boxed up and given to a friend.

Truthfully, I haven't missed them and now I think twice before spending money on another hardback. I still read, I just don't "buy to have"...I buy paperbacks I can leave for others or I download them on my Kindle. 

I will say that getting rid of clutter, a real heart wrenching purge and declutter, is ESSENTIAL to making your house a home. Maybe one or all of these tips will make that process a little easier!

Rewiring an old fan and my home's 15 seconds of fame....

The trim pieces for the kitchen still have not come in so as much as I would love the share my kitchen "reset" I am going to hold off until it is ALL done. I did share the construction and addition of the floating shelves last week, and you can check that out here.

This week I want to share an easy little project that I incorporated into my kitchen.

I have always wanted a fan in my kitchen...especially now that I am at the age when sudden bursts of "heat" wash over me (some call them hot flashes...but those are for old women!) A paddle fan isn't really a good idea in the kitchen, especially if you have a gas range like I do.

Over the years I have bought several "vintage" and "antique" fans at auctions. My favorite was a teal fan I had in my room for months...but as with a lot of things, it eventually went to the flea market and was sold...darn it! NOW I have the perfect place for it! 

A month or so ago I picked up two antique fans at an auction...one a Westinghouse and the other an Emerson. I did a little research and found that both were from the 1930s. One had a decent, intact cord on it so I tested it and it worked beautifully after it was cleaned up and oiled. The other had a pretty ratty cord and there was NO WAY I was plugging that sucker in!

I took the working fan to my booth and kept the one that had the ratty cord. Since it had the "least value" and was a tad smaller and lighter, I decided to keep it and replace the cord!

The first thing I had to do was give it a good scrubbing. Most of the fans I have bought have been pretty nasty. Straight ammonia and steel wool! Not fun but necessary. Then I spritz all the insides with WD40.

Replacing the cord on any appliance, especially these old fans, is not difficult. If you can open it up and find the electrical connections, its pretty simple. These old fans have a few screws holding the baseplate onto the base of the fan...just remove the screws and remove the base plate.

Make sure you note where the old connections are....you want to make sure you hook up the new wiring properly. Occasionally, I will use painter's tape to actually "label" the posts or wiring so I don't forget...or better yet take a picture of it. 

(Disclaimer...I actually used an old extension cord I had stripped to make sure the fan actually worked before I invested in a new cord! No sense in replacing the cord, only to discover that the fan motor wasn't working!) 

Once I opened it up and got a look at the connections (and cleaned it up a bit...ewww), I purchased a new cord and electrical connectors at Lowe's. 

The replacement cords have two bare wires on one end and a plug on the other. Just "crimp" the connectors on each wire and then attach the new wiring to the fan (or appliance) like the original wiring was connected. In my case, one wire went on one bolt and the other wire went on another bolt...then just tightened with a nut and washer...simple simon! 

Then reassemble the fan. On this fan, it was just a matter of putting the base back on!

This fan is a little "vintagey" for my decor tastes, but I like that it adds just a touch of "eclectic" to this space. And as with everything, it will serve a great purpose when those heat waves hit!

COMMERCIAL SHOOT!

A few weeks ago, an old classmate of my son posted on Facebook that a producer he works for needed a fireplace to use in a photo shoot. Hey, I have TWO fireplaces...sweet!

I thought "photo shoot" meant they wanted to come take a few pictures. Um, no. Verge Videos is currently shooting a commercial for Dayspring Greeting Cards in my den. And since it is a Christmas commercial, we had to haul a bunch of Christmas decorations down out of the attic to "stage" the shots!

I know several bloggers who have had to decorate their house for Christmas in JUNE for magazine shoots! Pish-posh...not happening...and now it is! 

Truth is, it is fun to watch all the work (and mess) that goes into making a simple little commercial! Lighting, props, hair and makeup...the whole shabang! Super cool process! 

I have no idea if this is a local or national commercial. Doesn't matter...my house is officially a "pro" and will get it's 15 seconds of fame. 

 

PINK TOOLS!!!!! Yippeeee.....

When I went to Lowes Sunday, Austin the Tool Guy showed me their knew PINK tools and storage boxes!  ​

I was soooo excited...just in time for Mother's Day!  The tool bags are stocked with basic tools and come in both lavender AND pink!  ​

The pink storage box is perfect for everything....screws and nails, sewing notions, craft supplies!  Anything and everything!  It would be perfect for a young lady headed off to college...stocked with anything you can think of a young woman might need living in tight quarters in a dorm room!​

They also have a little pink screw driver and a pink bit set! ​ Not quite powerful enough to do the jobs I do, but perfect for little DIY projects around the house!

These are all perfect and affordable Mother's Day gifts for any mom wanting their OWN tools!!!​  And while you are at Lowes, run through the garden center and pick her up a pretty hanging basket...

DON'T FORGET MOTHER'S DAY!!!!