More painted furniture projects and how you can get perfect paint results!

I know I share a lot of painted furniture projects. There was a time when I was a "paint snob." If it is wood, no paint.

But I have learned in my resell business that paint is often the best way to "enhance" a piece and give it new life.

We all have "that piece." The one mom gave us or maybe we bought at a thrift store or garage sale because we needed a dresser or side table. A maple dresser from the 60s or one of those fake wood "cherry" tables from the 80s. We still need it for the storage or even to fill a space and buying new just isn't an option.

As I have said before, life is too short to live with ugly furniture and even the ugliest piece can benefit from a little "makeover"

Updating an old dresser or bedside table isn't difficult. Yes, Pinterest is filled with precious stenciled and glazed projects...and we all envy. But simple is easy and the impact can be huge. I have shared hundreds over the years and every week I complete at least 2-3 pieces that often do not get shared...either I forget to take pictures or they sell so fast I think "why bother."

So today, again, I'm going to share a few simple little projects and how to get the best results.

Mini makeovers that can make a huge impact in any room!

This campaign dresser had seen it's better days....

As you can see, it had been seriously abused. But even the ugliest piece has potential....

Not the best "after" picture, but I didn't think to take a picture before I took it into 410 Vintage so I snapped one with my phone...but you get the idea. (If you haven't been to 410, GO!)

It sold the day I took it in! These "upcycled" dressers are perfect for a bedroom or even a tv and storage cabinet in the living room.

You might have noticed one piece of the hardware was missing. I happened to have one of the pulls from this project so I used the same method to retrofit it. You don't have to do anything that complicated...most home improvement stores have tons of hardware options. All the hardware was solid brass so I cleaned it up with some Brasso, steel wool and elbow grease. The point...the hardware doesn't have to be all matchy-matchy.

This little bedside table had seen it's better days!

A simple little makeover...paint and new hardware....new life....

This is a typical hard rock maple dresser you can find for next to nothing at thrift stores and garage sales...

Usually sturdy as the day they were built, but seriously ugly and dated!

They obviously can benefit from a little love and attention...nothing fancy just a little paint and hardware update....

An inexpensive little "fake wood" side table......

And AGAIN...

I liked the brass hardware on this one so I just cleaned it up!

Sooooo...what do all these projects have in common.

KSTP...Kilz (or any good primer!), sand with 220 grit paper, wipe down with a tack cloth and paint.

The two dressers were painted with latex paint using a 4" foam roller and paint brush. I used spray paint on the two little side tables.

So, here are a few TIPS for getting the best results when painting furniture.

1) Always clean the piece of any dirt or debris. Just wipe it down with a damp cloth and make sure you get all the "ick" off! If the piece is super grungy, you might want to clean it with ammonia or wipe it down with mineral spirits! (If it has a lot of flaking paint, you can sand it down a bit or better yet, strip it using this process...just make sure the existing paint or finish is stable!)

2) Make repairs. DO NOT waste your time making it pretty if it needs repairs. And remember, glue and clamps are your friend!!!! If you don't know how to repair something, google it or email me. MOST furniture repairs aren't that difficult...but if you do it wrong (or not at all) you will be wasting your time making it pretty!

3) Primer....always a must if you are going to paint with spray paint or latex or oil paint. I swear by the oil-based Kilz. If you want your paint to stick and not chip or peel, prime. For smaller projects I use spray Kilz. For larger projects I roll on Kilz with a 4" foam roller. Even if your paint says "all in one paint and primer"...use primer.

4) Sand smooth after the primer has thoroughly dried. A 220 grit paper should do the trick...FEEL the surface...if you can feel it, the paint won't hide it.

5) Use tack cloth. Most tutorials will tell you to wipe the piece with a damp cloth. That won't cut it! Tack cloth will pick up the finest grains of dust and debris you can't see until you paint the piece! Use it!

6) If you are going to brush on latex or oil, use a quality brush AND TAKE CARE OF IT! I have brushes I have owned for years because I am religious about cleaning them thoroughly after use. And don't even think about using those cheap disposable brushes (chip brushes). They are great for many things, but not for getting a smooth paint finish on furniture!!!!

7) ALWAYS use an additive....Floetrol for latex, Penetrol for oil based paints.

8) Use quality paint. Especially spray paint. I know it is cheaper at discount stores but pay the extra few dollars and buy a quality spray paint at your home improvement store. Cheaper will NOT be better if it doesn't hold up to wear and tear! I do 2-3 light coats (spray or brush) rather than trying to get solid coverage with one coat...trust me when I say, there is NO paint on earth that will get good coverage with just one coat!

9) Cure time is important. Seriously, I know they style their pieces on those HGTV shows within hours of painting a piece of furniture. Just don't! Just because the paint feels dry to the touch DOES NOT mean it has cured. Latex...a few days...oil...a week. Give your paint time to cure or it is going to peel or chip if you try to use it right away! Put the piece in place and chill!

10) Spray vs. Brush/roller. For me, it all depends. I have learned that large flat areas are tough to get an even coat of paint on with spray paint...and of course there is the expense factor for large pieces. A dresser can take 2-3 cans of spray paint. So it really depends of the piece. Sometimes I will spray the drawer fronts of a dresser and roll the top and sides.

11) Keep a little spare paint for chips and dings...if you use latex or oil, just put a few tablespoons in a little container and stick it in the back of the drawer...just in case! If you are using spray paint, keep a can with a little paint. Manufacturer's change paint colors and you might not be able to find that awesome color in the future. Keep spare paint in the house...not the garage or storage shed!

Regardless of whether you spray or roll/brush, you have to follow the first rules of KSTP....Kilz (primer), sand smooth, then tack....then paint!

If you follow these simple guidelines, you can update a dated piece with just a little time and effort.

Again, life is too short to live with ugly furniture...

Info

Comment

The hardware sets the tone...dresser makeovers!

We have been pretty busy this past month so I haven't been able to go to too many auctions. I was forced to scrounge around on Craigslist and online garage sale sites to find a few pieces to work on..

They did not disappoint!

As usual, I am drawn to the "nobody wants me because I am totally ugly" pieces of furniture.

I like different and unusual.

This chest and side table checked off all the boxes...kinda ugly and unusual.

The ugly part is pretty obvious but they do have nice "bones." Solid and sturdy!

The unusual part was the hardware. I love unusual hardware. Sometimes the hardware dictates what direction I go with a piece.

In this case the heavy black handles pushed me towards blue/gray. A friend asked me what paint color I used. Well, let's see...I had some blue, I threw in some black...too dark, so I added some white.

So I have no idea what color it is....blue/gray!

They had some detailing so I decided to do a chalk paint and distress treatment. I usually save that for pieces that have good detailing that will "pop" when I distress it.

Two coats of chalk paint, a little distressing and sealed with poly. The hardware just needed a little cleaning and it was good to go!!!

Hardware can be a booger when it is missing. I picked up a campaign dresser last week and the brass hardware was amazing. The only problem was it was missing one handle and they are next to impossible to replace.

I really wanted to stay "true" to the style of this dresser...a mid century campaign. But the old finish was pretty dark and dated. (did I take a before picture like a good blogger...um...no!)

Very similar to this little side table I recently refinished.

I decide to shine up the brass hardware and give the piece a sleek new look with gloss white paint.

The missing handle, however, posed a real challenge!

I knew I was going to have to scale back to one handle on each of the top drawers but I couldn't just patch little screw holes because the handles actually "inset" into the face of the drawer.

The thickness of the hardware was 1/4"...so I bought 1/4" pieces of craft board....

....cut out a hole big enough for the hardware to sit in and then attached the boards to the face of the drawers with wood glue to cover the existing cut outs!

KSTP (Kilz, sand, tack and paint!) treatment, reinstalled the spiffed up hardware and.....

Perfect! Obviously someone else thought it was perfect because it sold the day I took it in!

Until next week....

Info

Comment

Oak dresser makeover....

I shared here how I scored a new bed frame for my master bedroom!

I bought the entire set which included a chest of drawers and two nightstands. Since I am not into "matchy-matchy" and didn't need the chest and nightstands, I decided to do something to mask the "timeless" honey oak of the remaining pieces....

Notice the use of "quotes" on "timeless." I have lived long enough to know that NOTHING is timeless. Nothing. Not subway tile, trestle tables or hardwood floors.

Why? Because while they date back decades, there was a time when those now-popular must haves in the decor world were seriously out of favor. Had you bought a house with subway tile and hardwood floors in the 70s, you would have immediately replaced them with wall-to-wall carpet and olive green 4x4 tile.

Not saying you shouldn't decorate with the times, just don't expect it to be the "in thing" 15 years from now!

Anywho, back to the chest and side table make overs!

As always I have to have my "stain" fix. Occasionally I will paint an entire piece, but if there is some redeeming wood on a dresser or table, I want that mix of stain and paint. These piece are oak, but the color of the oak was the dated "honey oak." So I used gel stain on the tops and drawer fronts and painted the "cabinet."

Gel stain is super easy to use and allows you to change the color without having to strip the old finish.

I always stain before I paint. Primarily because after the stain and finish cures, you can tape it off to paint!

Again, no stripping or sanding. I have tried every gel stain on the market....General Finishes brand is the ONLY gel stain and finish I would recommend for this process. It comes in a variety of colors and sheens.

First, knock the sheen of the old finish off by lightly sanding with 220 grit paper...you don't need to get it ALL off...just a light sanding (WITH THE GRAIN!), then wipe it all down with a tack cloth. Wipe on the first coat of stain with an old athletic sock (I put on a disposable glove first)...let it dry for 24 hours, then wipe on the second coat with a fresh old sock...dry 24 hours...then wipe on the 3rd coat (again, fresh sock).

The first two coats will leave you in a panic...don't. I promise you will have the look you want after three coats.

Keep in mind, it is stain...NOT paint. So don't be heavy handed with it or try to get perfect coverage with the 1st and 2nd coats. Keep it thin and translucent. And ALWAYS wipe with the grain of the wood! After 3 coats of stain, I seal it with the General Finishes wipe-on poly!

If you goof, the stain will easily wipe off with mineral spirits BEFORE you seal it with the poly.

Let the poly cure well, at least 4-5 days before taping it off for paint.

This is what my "assembly line" process looks like when I prime several pieces....

I had four dressers that needed priming. This is also what I call taking a piece to "base neutral." Sometimes I have no idea what color I want to paint a piece until I can get the old crudy finish covered. I prime and sand and then wait for inspiration.

When it was all said and done, the oak dresser and side tables got plain ole' "off white." Classic.

And of course, new hardware.

Obviously I did something right...the chest of drawers sold immediately.

If you have a piece that has a "dated" finish, try using gel stain to update the stain color. Every decor needs the warmth of a wood finish...so don't be so quick to slather paint on every piece!

Until next week....

Info

16 Comments

Drexel Accolade Nightstand makeover....

I cringe when I even think about painting any MCM piece but occasionally I bite the bullet and paint. Painted this MCM dresser and chest and have never regretted it...yet.

These little Drexel Accolade campaign "nightstands" are described as "MCM" but my research shows they are from the 1980s...so at best they are "vintage." (I cringe even more describing anything from the 80s as "vintage" since I graduated from college in the 80s!)

These little tables vary in "value." Originally my intent was to sell both as-is. But one had some serious "splash marks" all over it and as much as I tried I could not get it off. My only option was to completely strip and refinish the piece...or paint.

Since I am AGAIN working on the final stages of my den makeover, I decided to paint the one with the serious flaws and use it as a side table. I started to strip and stain it, but I really need a painted piece rather than stained....just my preference. I believe it is important to have a balance of paint and natural wood in any decor and in this case the scales tipped toward paint.

(I will remind you to use extreme caution when painting "vintage" or "antique" pieces...do your research and know what you have FIRST! Make an informed decision before you refinish or paint...you don't want to find out later that you slathered paint on a 1796 colonial side table or spray painted a Hans Wegner chair...just watch "Antique Roadshow")

You can use ketchup or lemon based cleaners to clean brass. Just Google!

The brass hardware on these little tables needed some serious attention!

One interesting tidbit I ran across was how to determine if you have solid brass or brass plated...a magnet...magnets won't stick to solid brass...if it sticks, it is plated...interesting. Mine are solid so that determined how "aggressive" I could be cleaning them.

I'm not sure if a "clear coat" was sprayed on this hardware or age had taken a toll (maybe both), but even my 1/2 and 1/2 mixture didn't cut it. In the end I used a toothbrush, 0000 steal wool, a heavy duty brass cleaner and a ton of elbow grease.

Then I gave the entire piece a little KSTP treatment...Kilz, sand, tack cloth and then paint.

I really like the look of "high gloss" so I went with a high gloss lacquer white...I think the brass really pops against the gloss white and hopefully it will look good with whatever couch I finally set my sights on!

One word of warning I hope all will take seriously...give paint time to "cure." Nothing is more frustrating than spending time and effort making a piece pretty with paint, only to mess it up by putting doo-dads on it too soon! Cure time IS important!!!!

I cleaned up the other and it may be sold...I may hang onto it for the time being to see if I can use it in the den...but I am not really into "matchy-matchy" so I may not use it...who knows. And besides, that brass is a booger to shine up so I'm not really looking forward to doing that again any time soon!!!

You may notice I have a mix of MCM and "traditional" in my den...and that is honestly how I would describe "my style"....eclectic or maybe "transitional"...a little of this and a little of that. It allows me to add elements I love without having to worry too much about the actual "style" of each piece.

Until next week....

Info

7 Comments

MCM dresser makeover AGAIN!

I featured my personal dresser make over here!

I really love this dresser but as I mentioned in the original post, I have always regretted painting the drawer fronts. They have a little slant and as you can see in the linked post, they have a little "inlay" detail! Looking back, I wish I had stripped the drawer fronts, oiled them and just painted the cabinet and top....kind of like what I did with this dresser!

I guess I could have rolled up my sleeves and taken on the task of stripping the fronts...but honestly, you can't go back and easily undo what has been done...or can you?

If you find the exact same dresser, YES YOU CAN!!!

I happen to be driving down the street this past weekend and spotted a dresser and chest of drawers sitting out in a driveway. It just so happens they were the EXACT same style I have. I couldn't stop fast enough (annoying to the person behind me since I was hauling my 14' trailer) but was disappointed when told someone was coming to pick them up later that evening. I asked them to call me if they weren't picked up...that is when I found out they were GIVING them away...would I be willing to PAY for them? YOU BET YOUR BAZOOKA!!!! I couldn't get them in my truck fast enough. Do I feel a tad guilty that someone showed up later that evening to pick up their free furniture...only to find it gone...naaaaaa...okay just a tad.

So this is what the dresser looks like in it's original glory! A "Ward Furniture Manufacturing" dresser. It is identical to my blue one before I gave it a little makeover.

Hardly a scratch on it and the veneer was all intact and in good condition. I am always amazed when a 50 year old piece of furniture is in such amazing condition...I wish this 53 year old had faired as well!

I removed all the drawers and stripped the fronts using this process...never fails and a pretty quick process! Even though the finish was near perfect, old finishes "muddy" and "amber" over time and just removing the old finish really brings out the beauty of the piece!

TIP! When you remove drawers from a chest or dresser, make sure you label each drawer (I mark them on the underside with a pencil!)

The drawers may look identical, but truth is they may not fit properly in a different place...age and wear can make drawers "stick" if they aren't put back where they were originally!

I gave the cabinet a little KSTP treatment...Kilz, sand, tack and paint! I applied 4 coats of tung oil finish to the drawer fronts and legs...sanding (with 0000 steel wool) and tack between each coat.

I. LOVE. WALNUT. AND I. LOVE. MID CENTURY!

And now I. LOVE. THIS. DRESSER!

I didn't "dislike" the original dresser, but again, I did regret that I didn't restore the drawer fronts. Now...perfect!

As much as I would love to keep the matching chest, it will be sold. Can't keep every piece and since these aren't "valuable" MCM pieces, I don't feel too bad letting it go!

Painting dressers today so until next week....

Info

Comment

A new bed frame!

The last time I shared my master bedroom I had just finished the laminate flooring!

In this post I shared the "before and after" of my bedroom furniture.....

The bed was just so big and heavy and dark! Painting helped a bit, but it was still pretty big and "scrolly"...and I was just never really fond of it. For the record, I was madly in love with the entire set when I paid a fortune for it 16 years ago...but not so much these days.

It is no secret that in my OWN home, I have been slow to embrace the "country" style in large scale...mostly because I am afraid it will be a "passing fad." Not as bad as the chevron and burlap "fad" of 2014, but I worry enough about it that I am not going to start dragging my prized furniture to the garage and slathering it in chalk paint. (And for the record, it is another reason I am a HUGE advocate of sealing chalk paint with poly rather than wax...when the fad fades, you can easily repaint the pieces without having to strip the wax! And yes, you will have to strip the wax!)

What I have done is be very selective about incorporating the style into my home decor with a few pieces that I won't be too torn up about when the "fad" fades and I have to restyle them or dispose of them.

To me, that is the secret to decorating. Incorporate the latest trends in less expensive ways...decorative pillows and curtains, wall decor, small furniture, wall paint.

It is one reason I have not jumped on the painted white cabinet train...it is a HUGE undertaking...both financially and physically, and when the trend fizzles in a few years, there are going to be a lot of people not so happy with a kitchen filled with expensive painted cabinets. (For the record, I am NOT opposed to painting some kitchen cabinets...just not mine...yet!)

"But white cabinets never go out of style" you say. Well I say you obviously don't remember "honey oak" or "cherry furniture." EVERYTHING goes out of style. So be selective and proceed with caution when shelling out big bucks and Herculian effort to follow the trends! Do what you love, but think very carefully before taking on a massive Pinterest project!

Sooooo...back to the big, heavy and still too "dark" bed frame.

Since I have not been "in love" with this piece of furniture for many years, and since I have made an effort to TRY to fall in love with it again, and failed, it is time to make a change.

And here is how I did it....

Now, before you think "OMG, she bought an expensive country style bed frame," let me tell you how I did a little horse trading to get this piece without breaking the bank.

First, I bought an entire bed room set at an auction. I didn't take pictures of the bed frame, but this is the matching dresser and nightstand...

Honey oak...EEEECKKK! My least favorite wood and color. And it is certainly "not my style." But stay with me!

So it came with a mattress and boxsprings...I didn't need them so the auctioneer resold those for me...deduction number one. Then I sold my old bed frame...deduction number two. At this point, I am at "break even." The dresser and bedside tables are getting a makeover and will be sold. The frame got a little makeover for my room.

This is how I justify incorporating the latest trend in my bedroom...it didn't cost me anything but a little time and paint.

Am I madly in love with it? Umm...not really but I like that I have incorporated the latest trend with little expense and effort.

I like that it is not as big and dark and hulking as my other bed frame...simpler, smaller, different.

I do LOVE the fact that when the "country faze" finally fizzles, I will not beat myself up for disposing of an expensive piece of "trendy" furniture!

Adding elements of the current "decor craze" doesn't always entail making a big financial commitment.

Case in point....

Info

2 Comments

"Repurposed" oak dresser....

So many little projects happening...a tv console, a thrift store wall clock, an old love seat, some Eastlake chairs.

But today I want to share another "Trash to Treasure." As I have mention, I often find discarded, abused pieces of furniture at the apartments. They either get left behind in a unit or thrown on the trailer I keep out back for bulk trash.

Someone had tossed this oak chest skeleton onto the trailer....

It wasn't in terrible shape but it was missing all the drawers. I hated to just toss it in the dumpster...I knew I could do something with it, just wasn't sure what. I brought it home and waited for inspiration to hit.

I did have to do a little bit of structural repair...nothing major...glue and clamps!

I decided to turn it into a little shelf....kitchen, bath, bedroom...wherever someone might need some extra storage for dishes, towels or even shirts...maybe add some cute baskets or boxes.

I cleaned it up, chalkpainted and distressed the "skeleton," added some stained plywood shelves, and....

I thought about painting the inside but decided to let it be what it is...and old oak dresser repurposed.

Sometimes less is more.

Info

2 Comments

Waterfall armoire makeover....

This week's project is a classic example of "OMG, can I really paint an antique!!!???"

This is a pretty little vintage waterfall armoire I picked up at an estate auction a few weeks ago. It wasn't in terrible shape, but it really didn't have a lot going for it aesthetically...kind of plan and boring!

It did have some really pretty bakelite hardware, which is classic on waterfall pieces. The problem was the condition of the hardware. One was completely missing the bakelite, and the other three were broken and chipped....pretty much unsalvagable!

The "design" on the top drawer was not a true inlay...and the general construction was pretty simplistic. I did a little research online to make sure it wasn't something of great value! Sometimes, when there are no makers marks, you just have to make a judgment call on the value as a "restored antique."

In the end, I decided to give the piece a little KTSP treatment and give it a new life. Hopefully it will make a perfect little dresser/storage cabinet for someone!

I removed all the hardware, taped and papered the drawers and insides and sprayed it down with Kilz. Since one of the pulls was toast, I puttied the holes so I could add a single pull. After sanding it smooth and wiping it down with tack cloth, it was time to paint.

Unfortunately, it is that time of the year when temperatures don't always cooperate. So I had to haul everything into my dining room and use a brush and roller instead of spray paint.

No biggy IF you do it properly...make sure you use a quality brush, a 4" foam roller and add Floetrol to your latex paint! (Penetrol for oil based) The additive will give your paint a longer dry time and more time to "level," eliminating brush and roller marks.

I found a pretty blue and tried it on the drawers..ummmm...no. Too babyish. So I mixed a little black in some green and came up with a greyish-green I kind of liked.

I removed the broken bakelite from the pulls and sprayed them with metal primer then sprayed them with gold paint. Kind of pretty!

All in all, it turned out kind of cute. While it was a nice "vintage" piece, I think the paint and new hardware gave it a nice little "update" and a chance at a new and useful life....

If you are certain a piece is not a valuable antique, don't be afraid to give it a little face lift!

As I mentioned last week, I have been working on reupholstering the club chair and ottoman in the living room. Unfortunately I had to order a little more fabric so HOPEFULLY I can finish it up this week and share next week!

Until then....

Info

Comment

Armoir makeover....

Occasionally I find a piece I really love. This armoire is one of those pieces.

I obviously don't have room for it in my home, but it is a very unique piece that could serve a number of purposes in a home...dresser, kitchen pantry, tv cabinet or even bathroom storage!

In it's original condition it wouldn't have been difficult to over-look. But this is one of those times one has to look beyond the years of neglect and abuse and know that it can be made beautiful and useful again!

Again, I have to have my "wood fix" so I decided to strip and refinish the top. I stripped it using this process and then topped it with tung oil finish. I love how removing all the old "muddy" finish revealed a very unique and beautiful walnut veneer! Seriously, this took minutes...don't miss out on uncovering a piece of "art" just because you think this will be a difficult task and do not use the wrong process (like sanding!)

I had originally planned to paint the inside, but after stripping the drawers I decided the mahogany was just too beautiful to slather in paint so I decided to strip and oil it as well.

The veneer doors and sides weren't anything to write home about. A little "chalk paint and distress" treatment brightened the piece and gave it a much needed "update." This "farmhouse" look isn't exactly my style but it really brought this cabinet into the 21st century!

In the end, a simple makeover made all the difference!

This week has been "project" week for me. Usually I take inventory of what needs to be done and then make a plan for how and when....again, I use an "assembly line" process when I have a lot to work on! Tuesday was sand, repair, build and prime day. Can't paint when saw dust is flying all over the place. Today I will sand the primed pieces and chalk paint a few. I like to let the chalkpaint cure a few days before I sand...I have found that the paint "distresses" rather than peels when it has cured well!

Off to work I go!!!!

Info

Comment

Lazy days....

This heat is brutal...I hate to gripe because my son reported it was 120 degrees in Phoenix a month ago and I usually we are in triple digits by now. But seriously, this heat and humidity is brutal.

Because of that I get a tad lazy.

First, I want to hibernate...seriously, go inside and not come out until October. Second, I tend to do stupid things....

Like take this little mahogany bookshelf in without doing anything to it....

Not horrible and I really thought just MAYBE someone else would take a risk on it. But it did have several issues.

First, the overall original finish...kind of cruddy!

Not horrible, but not great either.

The biggest issue was a "burn" on the veneer,. Seriously, how does this happen?

I have no idea!

I brought it home after it sat in my room at 410 Vintage for a month or so...evidently no one was willing to do their own DIY on it. So it was up to me to make it presentable...curses!

First, I had to repair the burned veneer (again, what the heck?) I used the same process I used on the old dresser and shared here.

I really wanted to save a little bit of the wood feature, so I used this process to strip and oil the top. Didn't take but a few minutes!

Plaster paint, distress and seal.

I want to admit one little glaring error in this little makeover. Mahogany has a tendency to "bleed" through any paint. The BEST thing to do when painting mahogany is to first seal it with a clear lacquer or primer, then apply your paint.

I, sadly, did not do this. And while my little "repair" job on the veneer is darn near perfect, the fact that the mahogany bled through makes this little oversight a little more glaring.