Lazy days....

This heat is brutal...I hate to gripe because my son reported it was 120 degrees in Phoenix a month ago and I usually we are in triple digits by now. But seriously, this heat and humidity is brutal.

Because of that I get a tad lazy.

First, I want to hibernate...seriously, go inside and not come out until October. Second, I tend to do stupid things....

Like take this little mahogany bookshelf in without doing anything to it....

Not horrible and I really thought just MAYBE someone else would take a risk on it. But it did have several issues.

First, the overall original finish...kind of cruddy!

Not horrible, but not great either.

The biggest issue was a "burn" on the veneer,. Seriously, how does this happen?

I have no idea!

I brought it home after it sat in my room at 410 Vintage for a month or so...evidently no one was willing to do their own DIY on it. So it was up to me to make it presentable...curses!

First, I had to repair the burned veneer (again, what the heck?) I used the same process I used on the old dresser and shared here.

I really wanted to save a little bit of the wood feature, so I used this process to strip and oil the top. Didn't take but a few minutes!

Plaster paint, distress and seal.

I want to admit one little glaring error in this little makeover. Mahogany has a tendency to "bleed" through any paint. The BEST thing to do when painting mahogany is to first seal it with a clear lacquer or primer, then apply your paint.

I, sadly, did not do this. And while my little "repair" job on the veneer is darn near perfect, the fact that the mahogany bled through makes this little oversight a little more glaring.

You can clearly see where the patch is and where the original finish bled through...I'm blaming this one on the heat too! I know better.

Oh well...guess I'll just drag it back in the house and give it ANOTHER little makeover...curses!

Info

2 Comments

The unwanted chair....

I run a shelter for unwanted furniture.... injured, abused and neglected. Before a neighbor hauls off a piece of furniture, they usually call me first to see if it is something I might want. Or they just drop it in my driveway...I have come home on more than one occasion to find an abandoned piece of furniture on my door step!

My next door neighbors brought me this busted chair a few months ago.

The chair my neighbor, Paula, brought me was a little on the "formal" side...needlepoint fabric, upholstery nail heads, intricate carvings...but it had a busted leg. . Fairly easy fix for me...a little glue and clamping!

The hardest part of redoing these chairs is removing the billions of tiny upholstery nails. I ordered those nifty staple and nail removal tools. Forget about it! In the end I used a flat head screw driver, a hammer and needle nose pliers.

After I removed all the nails, staples and upholstery, I chalk painted, distressed, and sealed the wood frame and then reupholstered it. These little chairs really don't take a lot of fabric so I decided to use some scraps I had on hand from another project!

The fabric may be a tad "casual" for such a regal chair, but personally I think it brings it down a notch...not so houtie-toutie!

Rather than use upholstery nails, I went with gimp trim...much simpler!

I've been pretty swamped the past few weeks. My oldest daughter graduated from college and my youngest daughter moved home for a few weeks until her condo is ready. In the meantime, we are building, stripping, upholstering and painting pieces for her new home.

One thing about little sis...she is learning that if you want something nice, sometimes you have to roll up your sleeves and do a little work. A lesson my dad taught me! Her first major project was this oak library table....now I think she has "the bug!"

So this past week Katie has been a busy little bee (funny since she actually raises bees!) She even attempted to make a dove tail coffee table...after all, she watched youtube videos and it didn't look too difficult. I tried to tell her those guys have been doing that kind of detailed work with VERY sharp tools their entire life. After she dang near sliced two of her fingers off with a chisel she decided to put that project on hold for a time. I ended up buying a beautiful MCM coffee table and she promptly went to work stripping the old yellow finish off! I am making her entertainment cabinet and we still have a few chairs to reupholstery!

Busy, wonderful time. I have several "resale" projects I need to be working on but I have learned that time with and for my kids is what is really important. I can't remember 1/2 of the stuff I have repurposed and sold over the years but I remember every skill my dad taught me.

There are things that will last a lifetime...and beyond.

Info

5 Comments

Serpentine dresser makeover...

I want desperately to share my entry makeover, only because I want desperately for it to be done. Week 5 and I am STILL waiting on materials...specifically ONE stair tread that somehow did not get ordered properly. I have one, I have all the risers, I have a new newel post, and the tile was delivered over two weeks ago. But like so many of my home DIY projects, there is one little element that isn't here and I desperately need to finish. Pooh!

So today I will share one of the pieces I told you about a month ago!!! I picked up several wash stands and dressers at an auction and all were in desperate need of a little "DIY magic!"

First, and most important, always make sure whatever you are getting ready to spend your time and money on is in good repair. This little serpentine dresser needed some glueing and clamping before I could get down to the business of making it pretty!

It wasn't in horrible structural condition...just needed a little glue and clamping in the back and a few of the drawers.

I used this process to strip the top...again, I have to have my "wood fix." These tops are super easy to strip and if the color isn't just right you can always apply a coat of stain....I added a coat of walnut stain to this one! Then just oil or poly, depending on your preference. I prefer tung oil finish but for resale I often use poly since most people know how to care for poly finishes!

I didn't fill the gaps or sand out the "imperfections" ...I wanted it to look like what it is...a solid old oak top!

The drawers and cabinet could have been stripped and refinished as well, but for resale I kind of have to "go with the flow." Paint is the "thing" right now so I gave it a few coats of plaster paint, distressed and then sealed with poly. Again, I never wax a piece and poly has just enough "yellow" to give the paint an "aged" look!

Simple new hardware, and it is good to go for another lifetime of use!

Pretty!

This is a busy and exciting week around our house! My youngest daughter finishes up her first year of college and will be moving home until her condo is ready next month. My oldest daughter...wife, mom, part-time paralegal...will be graduating (WITH HONORS!) with her associates degree on Saturday. So proud of both my precious girls!

The last time my oldest son was home, we managed to get a picture of all five!

Yes, they are as amazing and awesome as they look! I know this past weekend was Mother's Day, but these kids make me feel loved and special EVERY day!!!

Info

5 Comments

Drop door cabinet makeover....

Enough about my entry makeover FOR NOW! I'll get there eventually but I'm at the "wait" and "hum" stage...waiting on tile and stair treads and not quite sure what I want to do about trim and lighting...hum....

So in the meantime I thought I would share one of the wash stands I rehabbed. I went to an awesome auction several weeks ago and brought home 5 potentially beautiful dressers and wash stands. One just needed to be cleaned and oiled but the others needed some serious work.

On these older pieces I just can't bring myself to slather them entirely in paint. I always have to restore a little bit of the original wood. I know in today's world of home decor, paint is all the rage, but I need a good balance of paint and the "warmth" of wood. So no matter the condition of the top, if it is solid wood, I am going to strip it and refinish it.

This little cabinet was originally a "wash stand." It wan't in terrible shape but it had seen better days!

It had a little mirror on the back, which when removed left a "gap" along the back edge.

If I was going to paint the top, I could have filled it in with a strip of poplar and been done with it. But I knew I wanted to refinish the top so I added a piece of oak...

...just routed the edge, then attached it with glue and trim nails. I stripped the top with this process, applied a little walnut stain and sealed with poly!

I chalk painted and distressed the base and sealed with poly. The little drop front REALLY distressed, but sometimes I just let furniture do what it wants to do! A little update on the hardware and it is good to go!

The drawers on most antique pieces have some issues....remember GLUE AND CLAMP when repairing drawers! Not nails and screws! And since the drawers were pretty ratty and stained, I gave them a little KSTP treatment! (sorry, no pictures!) They look and smell much better if you will take the time to paint the inside of the drawers of these older pieces!

I think this would make an awesome bedside table or entry piece! Or even a tv cabinet!

I tried to "stage" this little piece with some of my auction finds....

....an old cheese box, some awesome scales and a wood duck decoy. But again, I am not the best photographer and I am definitely more about doing and less "froo-frooing."

I have several dressers and another wash stand to share, so stay tuned!

Info

2 Comments

It is time to scale down!!!!

I have made some hard decisions regarding the direction of my "rehab for resale" projecting. For years I have tackled anything and everything...large buffets and china hutches and major upholstery projects Pieces like this that I didn't even take decent pictures of and share!

I made little chalkboards out of the doors!!!

These pieces are big and bulky and take a lot of time and muscle.

Upholstery pieces (like this precious barrel chair) take a lot of time and material. On major upholstery projects, I barely get my money back on the materials, let alone my time. (If the cost of having something reupholstered knocks your breath out, try it sometime!)

And while I love doing what I do, I can't keep GIVING things away when I have so much time and money invested! (Ask my neighbors...if they say they love something, I usually give it to them!)

So...the big decision. From now on I am only going to do "smaller" pieces...little tables, wooden chairs, a few stools here and there...maybe a few dressers and such. And of course my first love, mid century pieces...big or small!

This table was a tad bigger....my neighbor bought it at a garage sale and wanted to know if I wanted to tackle it!

I love the old mahogany furniture and I love pieces that allow me to preserve some of the natural wood and still update with a little paint.

I removed the sides of the top that fold down and filled the screw holes with toothpicks and wood glue so the screws would reset tight. I STRONGLY suggest you do this EVERY time you remove old screws (it is also a great tip if you have a door hinge screw that is loose or stripped!) Takes very little time and will save you a thousand frustrations!

I stripped the top with 1/2 acetone and 1/2 lacquer thinner (see a full tutorial here!) and then applied 3 coats of tung oil finish. No stain...that is mahogany it all it's naked glory! Just breath-taking!!!

I cleaned the base with ammonia and water and then mixed up a batch of "plaster paint" with a "sample" paint from my den makeover. A little distressing and then sealed with spray poly.

This table is perfect for a small space but can easily be expanded if you need a bigger table!

Again, not really "my style" but the color is all the rage right now....evident by the fact that it didn't last a week. And while it was a "hot mess" when I got it, I loved bringing it back to life. It was a very enjoyable piece to work on!

And THAT is why I do what I do. "Finding the treasures" lurking under years of neglect and abuse.

It really is what I love to do! So I will continue to do what I love to do but I am going to FORCE myself to stick with the smaller pieces that allow me to enjoy my work without breaking my back!

We'll see how long this lasts!!!

Since I have posted a recipe in a while, I thought I would share a new roast recipe that is. to. die. for! Check it out here!

Info

8 Comments

Antique china hutch before and after....

I have had this china hutch in my booth at Midtown for several months.

Sadly, I probably paid WAY to much for it...first auction of the season and everything was going for WAY more than what they normally do. I bought it because I think it is beautiful, but truth be told, it really isn't the "style" people look for these days, as is.

I have debated for some time whether I should bring it home and paint it. I just wasn't sure that would be the answer.

Just this weekend I decided to go ahead and bite the bullet but I was still uncertain. Until I saw this....

Marian at MissMustardSeed featured this beautiful piece she painted. You can see the "before and after" on her site!

Sometimes when we see what others do, it is all we need to find our own inspiration and relieve any fears we might have of doing what needs to be done to enhance a piece!

I love the grey against the mahogany, but right now everyone around here seems drawn to the "whites" so that is what I went with!

I used my favorite off-white, Swiss Coffee, for the "plaster paint." I did not sand or prime before painting it with the plaster paint...no need unless the piece you are working on is really rough! I distressed it just a bit (220 grit sand paper) to bring out the detailing and sprayed the exterior with poly to seal it!

I had originally planned to leave the inside stained...but it still seemed a bit dark so I removed the shelves and painted the inside a soft "teal." I taped and papered off the exterior and primed the interior with Kilz, sanded, tacked and then applied two coats of spray paint! I left the shelving the original stain finish.

I absolutely adore the original hardware so I left it!

One thing Marian does is beautifully style her pieces for photos. I rarely have the energy (or back!) to haul a piece inside and "pretty it up" before I take pictures. As I have said before I am more about the process than the pretty. HOPEFULLY someone else can envision the piece in their home and can find their own inspiration for staging it! Someday I may have the energy and space to make a pretty "backdrop" in my shop (okay, so it is really my garage!) Until then, the best you are going to get is a halfway decent "before and after" shot and maybe a little bit of instruction.

The two top shelves are a little "bowed." They are thin enough that I think I can lay them out with some weights on them to flatten them!

The debate raging right now is whether to reinstall the door (I did not paint it!) or leave it open.

Hum....