Pumpkin cutting board tutorial....

I still haven't ventured to the storage building to retrieve my fall decor. I'm just not ready to go all out on the fall decorating.

But as I mentioned here, it is never too early to start a few little "fall projects!"

Over the years, I have shared several little cutting board makeovers....here, here and here! I never use wood cutting boards for food prep, but I like the warmth and whimsey they add to the kitchen!

Super simple little makeovers for old boards that have seen their better days!

I've kept my eye out for one shaped like a pumpkin but so far no luck...so I decided to make one.

I wanted to make one with walnut or mahogany but I didn't have any scrap pieces big enough. I had an old pine fence picket floating around my garage...I thought I might make a little sign with it but I decided it would be perfect for this project.

The board would be replacing the pineapple shaped board for the season, so I measured that board to determine the size of the pumpkin.

I cut it into three pieces a smidge longer than the height of the finished pumpkin...around 12".

I glued the edges, clamped the three pieces together and let them dry overnight.

I made a paper template of the pumpkin and traced it onto the board....

I used my jig saw to cut out the shape. Unfortunately the glued edges didn't hold and I ended up having to reglue the edges and then glue and staple little "cleats" across the back!

Since I don't intend to use this as a REAL cutting board, no biggy!

After REassembling the boards, I sanded the top and edges with my little palm sander.

As I have shared before, I always use Watco butcher block oil on my cutting boards. Again, I don't intend to actually use this board, but if you do, this product is food safe! Truth is, I just like the way this oil brings out the color and grain of the wood!

And it did not disappoint! A nice little "surprise" was the "orangish" patina of the wood when I applied the oil...perfect for the season!

This would be a simple little project to do in any scale...maybe a larger wood pumpkin or even a scarecrow cutout for your porch.

Last year I used an old board to make this little welcome sign...

It's amazing the things you can do with old scrap wood!

NOW I'm kinda in the mood to start decorating for fall.

Info

Comment

Updating fall pumpkins!

It is no secret that fall is my absolute favorite time of the year! I love the Christmas season, but I adore fall and by the time I finish my fall decorating, it pretty much looks like fall puked in my house!

As I mentioned (here) several years ago, I have considered transitioning to the "farmhouse" style fall decor...whites, blues, grays....more of a neutral pallet. But I just can't seem to move away from the "traditional" colors of fall....reds, oranges, yellow.

After years of exposure, a few of my pumpkins have started to fade and look pretty tired and worn. These pumpkins sit on top of the bookcase in the front room window.

I know...this picture is crud! But the glare is brutal especially with my limited photography skills!

Pretty gnarly looking!

It is way too early to start decorating for fall but this year I decided to make a significant change to the front window decor.

The little scarecrows were sold in a garage sale last year. The pumpkins could probably be tossed, but I decided to give them a little facelift and start SLOWLY making a move to a neutral color pallet for the season. Okay, so I'm probably not going to give up on my reds and oranges but it won't hurt me to change a few vignettes.

This is a prime example of "oh, what the heck"....they were toast so what is the worst that can happen...I don't like them and I toss them anyway!

First, I had to make a trip to the storage building and dig out the box with these ratty little pumpkins.

They are not ceramic or wood like these...just cheap little foam pumpkins. (I use to store all my seasonal decor in the attic but last year we rented a storage building so we didn't have to kill ourselves climbing up and down the attic stairs.)

Next, paint colors. I decided to go with off-white, teal and grey.

I couldn't find a gray spray paint I liked so I bought one of the little sample pots of light gray.

I removed all the little stems and stuck them in the styrofoam.

Most of the stems had come loose and needed to be hot glued anyway, so no biggy to remove them. I painted them gray, then "dry brushed" some brown on them to give them a "stem look."

I split them up based on size and painted them the three different colors.

After paint, I decided they still needed a little "something." On the teal, I dry brushed the grey in the grooves of the pumpkin, on the grey I used white and on the off-white I used the brown. I just watered down the accent colors, lightly brushed it on, then randomly wiped it off with a damp cloth. The accent colors gave the pumpkins some depth and a more realistic look.

I used hot glue to reattach the little stems.

Cute as a bugs ear and they will be perfect for decorating the window this year. I may add some silk hydrangea blooms! I'll try to remember to share when I get them all staged and pretty!

Pinterest is chalked full of fall vignette inspiration so I have no doubt I will be able to pull together a cute vignette using these little guys!

Before you toss a ratty old decor piece think about giving it a simple little facelift.

But again, it is still too early for fall! I usually decorate right before we make our annual trek to Colorado but this year we leave a little earlier so I may wait until we get home. Who know...the mood may strike the first time I pull on my Uggs!

But when the mood does strike, these little guys will be ready to go! It may be too early to decorate but it is never too early to start preparing!!!

Info

2 Comments

More painted furniture projects and how you can get perfect paint results!

I know I share a lot of painted furniture projects. There was a time when I was a "paint snob." If it is wood, no paint.

But I have learned in my resell business that paint is often the best way to "enhance" a piece and give it new life.

We all have "that piece." The one mom gave us or maybe we bought at a thrift store or garage sale because we needed a dresser or side table. A maple dresser from the 60s or one of those fake wood "cherry" tables from the 80s. We still need it for the storage or even to fill a space and buying new just isn't an option.

As I have said before, life is too short to live with ugly furniture and even the ugliest piece can benefit from a little "makeover"

Updating an old dresser or bedside table isn't difficult. Yes, Pinterest is filled with precious stenciled and glazed projects...and we all envy. But simple is easy and the impact can be huge. I have shared hundreds over the years and every week I complete at least 2-3 pieces that often do not get shared...either I forget to take pictures or they sell so fast I think "why bother."

So today, again, I'm going to share a few simple little projects and how to get the best results.

Mini makeovers that can make a huge impact in any room!

This campaign dresser had seen it's better days....

As you can see, it had been seriously abused. But even the ugliest piece has potential....

Not the best "after" picture, but I didn't think to take a picture before I took it into 410 Vintage so I snapped one with my phone...but you get the idea. (If you haven't been to 410, GO!)

It sold the day I took it in! These "upcycled" dressers are perfect for a bedroom or even a tv and storage cabinet in the living room.

You might have noticed one piece of the hardware was missing. I happened to have one of the pulls from this project so I used the same method to retrofit it. You don't have to do anything that complicated...most home improvement stores have tons of hardware options. All the hardware was solid brass so I cleaned it up with some Brasso, steel wool and elbow grease. The point...the hardware doesn't have to be all matchy-matchy.

This little bedside table had seen it's better days!

A simple little makeover...paint and new hardware....new life....

This is a typical hard rock maple dresser you can find for next to nothing at thrift stores and garage sales...

Usually sturdy as the day they were built, but seriously ugly and dated!

They obviously can benefit from a little love and attention...nothing fancy just a little paint and hardware update....

An inexpensive little "fake wood" side table......

And AGAIN...

I liked the brass hardware on this one so I just cleaned it up!

Sooooo...what do all these projects have in common.

KSTP...Kilz (or any good primer!), sand with 220 grit paper, wipe down with a tack cloth and paint.

The two dressers were painted with latex paint using a 4" foam roller and paint brush. I used spray paint on the two little side tables.

So, here are a few TIPS for getting the best results when painting furniture.

1) Always clean the piece of any dirt or debris. Just wipe it down with a damp cloth and make sure you get all the "ick" off! If the piece is super grungy, you might want to clean it with ammonia or wipe it down with mineral spirits! (If it has a lot of flaking paint, you can sand it down a bit or better yet, strip it using this process...just make sure the existing paint or finish is stable!)

2) Make repairs. DO NOT waste your time making it pretty if it needs repairs. And remember, glue and clamps are your friend!!!! If you don't know how to repair something, google it or email me. MOST furniture repairs aren't that difficult...but if you do it wrong (or not at all) you will be wasting your time making it pretty!

3) Primer....always a must if you are going to paint with spray paint or latex or oil paint. I swear by the oil-based Kilz. If you want your paint to stick and not chip or peel, prime. For smaller projects I use spray Kilz. For larger projects I roll on Kilz with a 4" foam roller. Even if your paint says "all in one paint and primer"...use primer.

4) Sand smooth after the primer has thoroughly dried. A 220 grit paper should do the trick...FEEL the surface...if you can feel it, the paint won't hide it.

5) Use tack cloth. Most tutorials will tell you to wipe the piece with a damp cloth. That won't cut it! Tack cloth will pick up the finest grains of dust and debris you can't see until you paint the piece! Use it!

6) If you are going to brush on latex or oil, use a quality brush AND TAKE CARE OF IT! I have brushes I have owned for years because I am religious about cleaning them thoroughly after use. And don't even think about using those cheap disposable brushes (chip brushes). They are great for many things, but not for getting a smooth paint finish on furniture!!!!

7) ALWAYS use an additive....Floetrol for latex, Penetrol for oil based paints.

8) Use quality paint. Especially spray paint. I know it is cheaper at discount stores but pay the extra few dollars and buy a quality spray paint at your home improvement store. Cheaper will NOT be better if it doesn't hold up to wear and tear! I do 2-3 light coats (spray or brush) rather than trying to get solid coverage with one coat...trust me when I say, there is NO paint on earth that will get good coverage with just one coat!

9) Cure time is important. Seriously, I know they style their pieces on those HGTV shows within hours of painting a piece of furniture. Just don't! Just because the paint feels dry to the touch DOES NOT mean it has cured. Latex...a few days...oil...a week. Give your paint time to cure or it is going to peel or chip if you try to use it right away! Put the piece in place and chill!

10) Spray vs. Brush/roller. For me, it all depends. I have learned that large flat areas are tough to get an even coat of paint on with spray paint...and of course there is the expense factor for large pieces. A dresser can take 2-3 cans of spray paint. So it really depends of the piece. Sometimes I will spray the drawer fronts of a dresser and roll the top and sides.

11) Keep a little spare paint for chips and dings...if you use latex or oil, just put a few tablespoons in a little container and stick it in the back of the drawer...just in case! If you are using spray paint, keep a can with a little paint. Manufacturer's change paint colors and you might not be able to find that awesome color in the future. Keep spare paint in the house...not the garage or storage shed!

Regardless of whether you spray or roll/brush, you have to follow the first rules of KSTP....Kilz (primer), sand smooth, then tack....then paint!

If you follow these simple guidelines, you can update a dated piece with just a little time and effort.

Again, life is too short to live with ugly furniture...

Info

Comment

Change is a coming...again

As much as I like to think everything stays the same around here...things do change!

Change came when Brian and I combined households. One of the many additions when he took up residence was his very large and very brown leather couch....

I featured the club chair makeover **here**

BB (before Brian) I had a light and bright couch....this couch went to the den....

(My daughter now has this living room...the couch, the leather chair and the rug!)

...after I gave away the hulking "mustard" couch!

The simple yellow couch went to my daughter's so for now the big brown couch has moved to the den ....

...to make room for the NEW couch I ordered two months ago...

...and as you can see, it has still not arrived.

There was a time when I probably would have ordered off the floor because I was too impatient to wait. But wait I have...and waited and waited and waited. Fortunately, it is due to be delivered today.

The biggest problem I have right now is the "matchy matchy" of the big brown leather couch and big brown leather chair in the den...

....so the new couch may go to the den and the big brown leather couch may go back to the living room.

Who knows...all I know is I am grateful for furniture movers and Brian's strong back and endless patience!

One disadvantage (or advantage, depending on your perspective) to going to auctions and having a resell outlet is the never ending supply of relatively affordable furniture. This Duncan Phyfe table was a fixture in my dining room for 15 years....

Then I found this really nifty antique table and shared how I refinished it here....

Then I found a really nifty trestle table and shared it's little makeover here....

I held onto this table for a time only because I thought I might follow the "farmhouse fad" and try to infuse a little in my dining area. But truth is, it always seemed a tad big...and honestly, it just isn't "my style."

A few weeks ago I snagged this cute little antique draw leaf table at an auction....

Not sure I am in love with it, but it suits the need for a smaller table nested against the wall and it can be expanded once a year for Thanksgiving dinner.

So, change is coming...when the couch gets here. It has been over two months since I ordered it so I hope I still LOVE it when it is delivered. Couches are one of those things I really need to love...because they are big and they are expensive and for me they are the anchor for the room. Rugs, pillows, tables and wall decor can easily be changed out to completely change the feel of a room...couches, not so much!

Info

Comment

The hardware sets the tone...dresser makeovers!

We have been pretty busy this past month so I haven't been able to go to too many auctions. I was forced to scrounge around on Craigslist and online garage sale sites to find a few pieces to work on..

They did not disappoint!

As usual, I am drawn to the "nobody wants me because I am totally ugly" pieces of furniture.

I like different and unusual.

This chest and side table checked off all the boxes...kinda ugly and unusual.

The ugly part is pretty obvious but they do have nice "bones." Solid and sturdy!

The unusual part was the hardware. I love unusual hardware. Sometimes the hardware dictates what direction I go with a piece.

In this case the heavy black handles pushed me towards blue/gray. A friend asked me what paint color I used. Well, let's see...I had some blue, I threw in some black...too dark, so I added some white.

So I have no idea what color it is....blue/gray!

They had some detailing so I decided to do a chalk paint and distress treatment. I usually save that for pieces that have good detailing that will "pop" when I distress it.

Two coats of chalk paint, a little distressing and sealed with poly. The hardware just needed a little cleaning and it was good to go!!!

Hardware can be a booger when it is missing. I picked up a campaign dresser last week and the brass hardware was amazing. The only problem was it was missing one handle and they are next to impossible to replace.

I really wanted to stay "true" to the style of this dresser...a mid century campaign. But the old finish was pretty dark and dated. (did I take a before picture like a good blogger...um...no!)

Very similar to this little side table I recently refinished.

I decide to shine up the brass hardware and give the piece a sleek new look with gloss white paint.

The missing handle, however, posed a real challenge!

I knew I was going to have to scale back to one handle on each of the top drawers but I couldn't just patch little screw holes because the handles actually "inset" into the face of the drawer.

The thickness of the hardware was 1/4"...so I bought 1/4" pieces of craft board....

....cut out a hole big enough for the hardware to sit in and then attached the boards to the face of the drawers with wood glue to cover the existing cut outs!

KSTP (Kilz, sand, tack and paint!) treatment, reinstalled the spiffed up hardware and.....

Perfect! Obviously someone else thought it was perfect because it sold the day I took it in!

Until next week....

Info

Comment

Oak dresser makeover....

I shared here how I scored a new bed frame for my master bedroom!

I bought the entire set which included a chest of drawers and two nightstands. Since I am not into "matchy-matchy" and didn't need the chest and nightstands, I decided to do something to mask the "timeless" honey oak of the remaining pieces....

Notice the use of "quotes" on "timeless." I have lived long enough to know that NOTHING is timeless. Nothing. Not subway tile, trestle tables or hardwood floors.

Why? Because while they date back decades, there was a time when those now-popular must haves in the decor world were seriously out of favor. Had you bought a house with subway tile and hardwood floors in the 70s, you would have immediately replaced them with wall-to-wall carpet and olive green 4x4 tile.

Not saying you shouldn't decorate with the times, just don't expect it to be the "in thing" 15 years from now!

Anywho, back to the chest and side table make overs!

As always I have to have my "stain" fix. Occasionally I will paint an entire piece, but if there is some redeeming wood on a dresser or table, I want that mix of stain and paint. These piece are oak, but the color of the oak was the dated "honey oak." So I used gel stain on the tops and drawer fronts and painted the "cabinet."

Gel stain is super easy to use and allows you to change the color without having to strip the old finish.

I always stain before I paint. Primarily because after the stain and finish cures, you can tape it off to paint!

Again, no stripping or sanding. I have tried every gel stain on the market....General Finishes brand is the ONLY gel stain and finish I would recommend for this process. It comes in a variety of colors and sheens.

First, knock the sheen of the old finish off by lightly sanding with 220 grit paper...you don't need to get it ALL off...just a light sanding (WITH THE GRAIN!), then wipe it all down with a tack cloth. Wipe on the first coat of stain with an old athletic sock (I put on a disposable glove first)...let it dry for 24 hours, then wipe on the second coat with a fresh old sock...dry 24 hours...then wipe on the 3rd coat (again, fresh sock).

The first two coats will leave you in a panic...don't. I promise you will have the look you want after three coats.

Keep in mind, it is stain...NOT paint. So don't be heavy handed with it or try to get perfect coverage with the 1st and 2nd coats. Keep it thin and translucent. And ALWAYS wipe with the grain of the wood! After 3 coats of stain, I seal it with the General Finishes wipe-on poly!

If you goof, the stain will easily wipe off with mineral spirits BEFORE you seal it with the poly.

Let the poly cure well, at least 4-5 days before taping it off for paint.

This is what my "assembly line" process looks like when I prime several pieces....

I had four dressers that needed priming. This is also what I call taking a piece to "base neutral." Sometimes I have no idea what color I want to paint a piece until I can get the old crudy finish covered. I prime and sand and then wait for inspiration.

When it was all said and done, the oak dresser and side tables got plain ole' "off white." Classic.

And of course, new hardware.

Obviously I did something right...the chest of drawers sold immediately.

If you have a piece that has a "dated" finish, try using gel stain to update the stain color. Every decor needs the warmth of a wood finish...so don't be so quick to slather paint on every piece!

Until next week....

Info

16 Comments

Your yard may need a new "rug!"

As I mention here (when I ranted about my neighbor's trees!) my yard is an extension of my home.

I obsess when it is time to replace a rug or flooring...I cruise the internet, pin every room that catches my eye on Pinterest, and spend months bringing home hardwood and tile samples! (Stay tuned for the drama of the new couch selection!)

But what about our yards...does your yard need "new flooring?" Mine sure as heck did!

It's not like I have ignored it....I have resodded this area at least 5 times in the last 17 years...most recently just last year. But it never thrived because I kept putting down the wrong sod...Bermuda and Zoysia...both of which need sun and this area of my yard did not get enough.

I resisted putting down the sod I KNEW I needed...Fescue. Silly reason actually. Most of my yard gets tons of sun and the Bermuda has thrived. Bermuda goes dormant in the winter and turns brown. Fescue does not...it pretty much stays green year round. The thought of having two different types of grass was more than my OCD could tolerate.

The fact is, after years of failure, there really was no other option...dirt or grass. No brainer really, but the grass I WANTED to grown wasn't going to survive the shade! Want in one hand, poo in the other.

Fescue it is...and it made a HUGE difference.

Just showing off some of my pretty potted plants!

The MAJOR upside to sod is instant gratification. A day of hard labor and you have a beautiful yard that will not wash away!

Sod vs. seed. In my opinion, the difference financially is really minimal longterm. Yes, the upfront cost of sod may seem substantial. I probably spent $600 on 4 1/2 pallets of sod and some top soil.

You have to top seed with straw. You will have to hope and pray you don't get a heavy rain that will wash away the seed (we have had more than a few of those in the last month!)...and of course there are always the birds who find it very tasty! Yes, you have to water sod, but you will water much more to establish seed and even then you might have a tough time nurturing it through the hot dry months of the summer! Seeding in the spring just does not give new grass time to get a good root system before the heat of summer!

In my opinion, sod is the only way to go if you have the ability to put it down yourself...and trust me, it takes very little "skill!" Just a strong back and clothes you don't mind getting dirty (REAL dirty!)

By the end of a back breaking day I had a beautiful new "rug" for my yard...and hopefully THIS time it will survive!

Info

Comment

Drexel Accolade Nightstand makeover....

I cringe when I even think about painting any MCM piece but occasionally I bite the bullet and paint. Painted this MCM dresser and chest and have never regretted it...yet.

These little Drexel Accolade campaign "nightstands" are described as "MCM" but my research shows they are from the 1980s...so at best they are "vintage." (I cringe even more describing anything from the 80s as "vintage" since I graduated from college in the 80s!)

These little tables vary in "value." Originally my intent was to sell both as-is. But one had some serious "splash marks" all over it and as much as I tried I could not get it off. My only option was to completely strip and refinish the piece...or paint.

Since I am AGAIN working on the final stages of my den makeover, I decided to paint the one with the serious flaws and use it as a side table. I started to strip and stain it, but I really need a painted piece rather than stained....just my preference. I believe it is important to have a balance of paint and natural wood in any decor and in this case the scales tipped toward paint.

(I will remind you to use extreme caution when painting "vintage" or "antique" pieces...do your research and know what you have FIRST! Make an informed decision before you refinish or paint...you don't want to find out later that you slathered paint on a 1796 colonial side table or spray painted a Hans Wegner chair...just watch "Antique Roadshow")

You can use ketchup or lemon based cleaners to clean brass. Just Google!

The brass hardware on these little tables needed some serious attention!

One interesting tidbit I ran across was how to determine if you have solid brass or brass plated...a magnet...magnets won't stick to solid brass...if it sticks, it is plated...interesting. Mine are solid so that determined how "aggressive" I could be cleaning them.

I'm not sure if a "clear coat" was sprayed on this hardware or age had taken a toll (maybe both), but even my 1/2 and 1/2 mixture didn't cut it. In the end I used a toothbrush, 0000 steal wool, a heavy duty brass cleaner and a ton of elbow grease.

Then I gave the entire piece a little KSTP treatment...Kilz, sand, tack cloth and then paint.

I really like the look of "high gloss" so I went with a high gloss lacquer white...I think the brass really pops against the gloss white and hopefully it will look good with whatever couch I finally set my sights on!

One word of warning I hope all will take seriously...give paint time to "cure." Nothing is more frustrating than spending time and effort making a piece pretty with paint, only to mess it up by putting doo-dads on it too soon! Cure time IS important!!!!

I cleaned up the other and it may be sold...I may hang onto it for the time being to see if I can use it in the den...but I am not really into "matchy-matchy" so I may not use it...who knows. And besides, that brass is a booger to shine up so I'm not really looking forward to doing that again any time soon!!!

You may notice I have a mix of MCM and "traditional" in my den...and that is honestly how I would describe "my style"....eclectic or maybe "transitional"...a little of this and a little of that. It allows me to add elements I love without having to worry too much about the actual "style" of each piece.

Until next week....

Info

7 Comments

Bee Box Shelf....

Sometimes things get "stored" in my garage and I spend a few years kicking them around.

My daughter started raising bees several years ago. She would occasionally bring home old "bee boxes" to paint.

One has been hanging out in my garage for...oh, I would say at LEAST two years. Waiting to be painted. Never happened.

In my quest to "organize" my mess of a garage I decided to purge a few things...but it is always hard for me to toss anything wood. One of my few "hoarding" tendencies.

An old bee box...scrap pieces of bead board from another project...old dresser drawer pieces...hum....what to do, what to do!?

Yep...a "bee box" shelf.

I used one side of an antique dresser drawer as the shelf and the scrap bead board for the back. A little glue...a few nails. I sanded the box and the shelf to clean them up a bit. (I could actually smell the honey!)After sanding and assembling I sprayed the entire piece with a clear coat just to seal the "chippy" paint.

Easy, peasy.

Not my style so of course it will be sold, but just a quick reminder that you can turn any old "scraps" into something pretty and functional with just a little imagination...this didn't take too much time or any expensive tools...just a saw to cut the shelf, a hammer and a little sand paper.

Next week I'll share the project that produced all the scrap bead board...another "repurposing" project!

Until then....

Info

Comment

MCM dresser makeover AGAIN!

I featured my personal dresser make over here!

I really love this dresser but as I mentioned in the original post, I have always regretted painting the drawer fronts. They have a little slant and as you can see in the linked post, they have a little "inlay" detail! Looking back, I wish I had stripped the drawer fronts, oiled them and just painted the cabinet and top....kind of like what I did with this dresser!

I guess I could have rolled up my sleeves and taken on the task of stripping the fronts...but honestly, you can't go back and easily undo what has been done...or can you?

If you find the exact same dresser, YES YOU CAN!!!

I happen to be driving down the street this past weekend and spotted a dresser and chest of drawers sitting out in a driveway. It just so happens they were the EXACT same style I have. I couldn't stop fast enough (annoying to the person behind me since I was hauling my 14' trailer) but was disappointed when told someone was coming to pick them up later that evening. I asked them to call me if they weren't picked up...that is when I found out they were GIVING them away...would I be willing to PAY for them? YOU BET YOUR BAZOOKA!!!! I couldn't get them in my truck fast enough. Do I feel a tad guilty that someone showed up later that evening to pick up their free furniture...only to find it gone...naaaaaa...okay just a tad.

So this is what the dresser looks like in it's original glory! A "Ward Furniture Manufacturing" dresser. It is identical to my blue one before I gave it a little makeover.

Hardly a scratch on it and the veneer was all intact and in good condition. I am always amazed when a 50 year old piece of furniture is in such amazing condition...I wish this 53 year old had faired as well!

I removed all the drawers and stripped the fronts using this process...never fails and a pretty quick process! Even though the finish was near perfect, old finishes "muddy" and "amber" over time and just removing the old finish really brings out the beauty of the piece!

TIP! When you remove drawers from a chest or dresser, make sure you label each drawer (I mark them on the underside with a pencil!)

The drawers may look identical, but truth is they may not fit properly in a different place...age and wear can make drawers "stick" if they aren't put back where they were originally!

I gave the cabinet a little KSTP treatment...Kilz, sand, tack and paint! I applied 4 coats of tung oil finish to the drawer fronts and legs...sanding (with 0000 steel wool) and tack between each coat.

I. LOVE. WALNUT. AND I. LOVE. MID CENTURY!

And now I. LOVE. THIS. DRESSER!

I didn't "dislike" the original dresser, but again, I did regret that I didn't restore the drawer fronts. Now...perfect!

As much as I would love to keep the matching chest, it will be sold. Can't keep every piece and since these aren't "valuable" MCM pieces, I don't feel too bad letting it go!

Painting dressers today so until next week....