A dresser makeover and a few changes to an "heirloom"

As I mentioned here I am no longer doing the whole “resale/flea market” thing. I am still working on a few projects here and there because it is what I love to do!

This piece is one I bought eons ago and has sat in my garage waiting on inspiration and time.

I bought it and the matching chest of drawers at a barn auction. Yes, it had been sitting in a barn…yes, I could tell it had been infested with mice at one time. No, I was not expecting to find two mouse carcasses while cleaning it. GAG!!!!

The ONLY way I have found to rid old furniture of old furniture smells (mice, cigarettes, moth balls, etc) is to first scrub with ammonia and then vinegar (do not do them at the same time!). Sometimes I will spray the inside of the piece with diluted vinegar and just let it dry. If that doesn’t do it, then I suggest you prime and paint the inside of the drawers. Fortunately, the heavy duty cleaning on this piece worked and I did not have to paint the drawers!

The top and drawer fronts are cherry veneer. The veneer was in pretty good shape and really just needed to be stripped and oiled…I used THIS process to strip the old finish. Tried and true! I know I link to this tutorial a lot, but it works!

After stripping the veneers, I applied three coats of tung oil finish and chalk painted and distressed the cabinet!

The hardware was in pretty good condition…just icky. So I primed them with metal primer and painted them with flat black paint.

AGAIN, another example of how a very few dollars and some elbow grease can turn the ickiest piece into something pretty awesome!

While I had the “farmhouse white” chalk paint mixed up I decided to give some old frames a little makeover.

When I visited my uncle this summer he gave me two old framed portraits of my great-great grandmother and my great-great-great grandmother.

They do tend to be on the “goulish” side…but I NEVER turn down family heirlooms. When he offered me THIS china cabinet….

…I knew it wasn’t “my style” but as I said, heirlooms trump everything. So I made a few changes to make it a little more appealing…I removed the red paper on the back, added glass shelves and cabinet lighting. Then I filled it with the great’s and grand’s china…it is what it is…and heirloom piece filled with heirlooms.

I decided I might be able to make the portraits a little less “goulish” by painting the frames…they were just so “heavy and dark.”

I hung them in the GUEST ROOM….

Meh…not swooning over them but again, they are family heirlooms. (I think they need to be closer together!)

Info

6 Comments

Updating outdated furniture...another "before" and "after" makeover!

You have it or you have seen it being sold for next to nothing on Craigslist or Marketplace or at garage sales.

Dated furniture. Naturally we turn our noses up at it because, well, ick.

But often these old dated pieces are rock solid and truthfully, they can be updated with very little time, money and effort. You just have to be willing to see past the “ick” and roll up your sleeves.

The first thing I did to “update” this piece was remove the little scrolly doo-dads on the top drawer and round doo-dads in the corners.

Often these little “doo-dads” are affixed with a little bit of glue and tiny nails…just use a chisel or flat object to slip behind and pop off…super simple…then just fill the holes and sand smooth.

After that I removed all the hardware. I liked the little brass knocker looking pulls so I painted them (and the round knobs on the top drawer) with metal primer and Rust-Oleum’s Oil Rubbed Bronze spray paint. I replaced the bottom two drawer’s hardware with oil rubbed bronze cup pulls…

While the hardware “cured” I painted the piece with homemade chalk paint. Two coats. Homemade chalk paint is SUPER cheap and easy to whip up…5 tablespoons of Plaster of Paris mixed well with 3 tablespoons of water…then add 2 cups of latex paint. You can buy sample pots of paint so you can mix the chalk paint any color you want. Then I “distressed” a tad with 220 grit sandpaper, wiped it down with tack cloth and sealed it with a spray on polycrylic.

So what does it cost to update a piece like this?

Time wise? A day. Chalk paint dries super fast so you can usually apply two coats and distress in a matter of a few hours, then spray or brush on a sealer.

Cost?

Wood putty/filler. Maybe $3-4 but then you have a BUNCH for other projects.

Spray paint for hardware. 1 can of metal primer and 1 can of spray paint…less than $10…and again you will have a bunch leftover for other projects

Paint for the chest. Home made chalk paint is super cheap. A box of Plaster of Paris is about $5. A sample pot of latex paint is less than $4.

Clear coat: polycrylic or polyurethane or any spray on clear coat…less than $10.

In this case I added new hardware on the bottom two drawers…that added about $20 to the total cost…but the original hardware could have been painted as well.

A piece of sand paper and tack cloth…less than $5 if you don’t have it on hand.

So realistically WELL under $50 and a little time and effort.

Seriously…soooo simple!

I have said it before and will say it again…LIFE IS TOO SHORT TO LIVE WITH UGLY FURNITURE!!!!

You CAN do it!

Info

1 Comment

A simple "before" and "after"....

A simple and inexpensive makeover.

Before….

After….

A little homemade chalk paint….5 tablespoons of Plaster of Paris and 3 tablespoons of water, mixed well. Add 2 cups of latex paint. Two coats…a little distressing…sealed with polycrylic.

The hardware wasn’t anything special…I primed it with metal primer and hit it with some blue spray paint I had on hand…could have been black, teal, white…whatever…not sure I am loving the navy but it would be easy to change it!

Simple, inexpensive…but oh so much better!

Remember, LIFE IS TOO SHORT TO LIVE WITH UGLY FURNITURE!!! YOU CAN DO IT!

Info

Comment

Herringbone dresser top....

I would love to take credit for all my incredibly creative makeovers but truth is I get a lot of inspiration from a lot of sources…Pinterest, other DIY bloggers, and random website.

This time it was my son. He found a really awesome entry bench online and built one for himself!

I shared his entry makeover here.

His girlfriend loved it so much he made her a desk for Christmas!

So when this dresser top turned out super cruddy, I decided to put a herringbone top on it.

The top is a veneer and had some “bubbling.”

I was able to sand the “bubbles” so that the top was smooth, but when I sanded, it took the stain and finish off and the gel stain just wasn’t covering it.

I could have sanded the entire top and removed all the stain and finish…or I could have painted it…. but nah….I kinda wanted an excuse to do something “different.”

Matt was out of town and couldn’t help me so he sent me THIS link…AWESOME tutorial. These girls do a bang up job on the video tutorial…if you love the look, they tell you exactly how to do it!

The top of the dresser hung over the front quite a bit so I decided to use my Kreg rip cut guide to cut down the top a tad.

My daughter got it for me for Christmas and this is the first time I was able to use it…LOVE! I have always used my “yard stick” trick to make straight cuts with my skill saw…this was SOOOO much better!!!

Using the linked tutorial, I started laying out the top. I used white pine 1x4 for the top boards and 1x2 for the edge banding.

Now, this is where I had to deviate a tad from the tutorial. Because I was covering a dresser top and not making a new top that I could flip over to cut down, I had to cut the herringbone boards from the top. If I covered the entire top before the cut, I wasn’t going to be able to “see” the edges of the existing top to know where to make my cut. So I laid all but the corner boards, used my long metal guide to draw my cut marks on all four sides, and then cut those boards first. Then I nailed down the corner pieces, marked them, and cut them.

I used a palm sander to sand all the edges before applying the trim boards around all four sides.

I puttied the holes with wood filler, let that dry, then I sanded the top and sides smooth. Remember, stain will not adhere to glue, so you want to make sure you sand well and remove any glue residue!

After sanding I applied the stain…pine does not take penetrating stain well so I used General Finishes gel stain. There will be tiny gaps between the boards…to get the stain down in between those gaps, I used a small craft brush. I sprayed on a polycrylic finish to seal it!

I had kilzed and sanded the cabinet and the drawer fronts before working on the top. After the stain dried, I painted those a “steel blue.” (Again, don’t ask me the color…it is a mix of blues and black I had on hand!)

I wanted to use the existing hardware but I wasn’t digging the original finish. I primed them with metal primer and painted them flat black…soooo much better and far cheaper than replacing it with new.

Just another “ick” saved from a life of “yuck.”

Again, you don’t have to go all fancy…I could have easily painted the top…but the tutorial on “Shanty-2-Chic” is super easy to follow!

Info

5 Comments

MORE makeovers...

Surprisingly I have MORE makeovers to share. The weather has been fairly cold and dreary but we have had enough warm days here and there to get a little work done. I get kind of lazy during the winter months…when it is cold and dreary I like to curl up and read. When it is warmer, I NEED to be out working…either at the apartments or on projects.

This first dresser makeover is something you could pretty much do inside on a cold day.

The only thing I had to take it outside to do was distress and seal. But honestly you could do both inside.

I use latex paint for my chalk paint recipe (5 tbs. of Plaster of Paris, 3 tbs. of water, mixed well, then add 2 cups of flat latex paint) and that can used inside.

To do a “wet sand” you would use a sponge with a scrubby on one side…something like this…

After the second coat of chalk paint, before it has thoroughly dried, you would take your sponge, wet it (DAMP NOT DRIPPING!) and start “scrubbing” the areas you want to distress…kind of like dry sand distressing. Keep a bucket of water on hand to rinse the sponge periodically. Doing it like that cuts down on the “dust” created when you dry sand, so you can do it inside.

Then I just seal the entire piece by brushing on a polycrylic (or wax if that is your preference.)

Rather than spend the money on all new hardware, I painted the existing hardware. I use a spray primer and spray paint so that needs to be done outside…but truthfully, you could live with the existing hardware until warmer weather…or just replace it.

But all in all, you COULD do this entire project inside…and it is well worth the time when you consider how much better it looks!

This next piece pretty much had to be done outside on warmer days…I wanted a high gloss lacquer finish on the cabinet and that entails spraying. And I wanted to strip the old finish on the drawer fronts and that definitely has to be done outside.!

I removed and labeled each drawer…that is a MUST because the drawers need to go back into their original position…just mark the underside with a pencil.

I removed the old finish on the drawer fronts using THIS process! I know I refer back to this tutorial a lot, but it is the BEST way to remove old finish or paint…it works and on projects like this, it probably only took me about 30 minutes to remove the old finish on these drawer fronts. Once the old finish was removed, I applied three coats of tung oil finish, rubbing with 0000 steel wool and tack cloth between each coat.

I sprayed the “cabinet” with Kilz, sanded and wiped with tack cloth, and then sprayed 3 LIGHT coats of white lacquer (KTSP).

As you can see from the “before” picture, it did not have legs…but it would have originally and there was even places on the underside to screw in the legs. I ordered new legs HERE and stained them to match the oiled drawer fronts.

Each is completely different and each required a different technique…but both were relatively simple and make a huge impact.

AGAIN, I am sharing how easy it is to do this because AGAIN…

LIFE IS TOO SHORT TO LIVE WITH UGLY FURNITURE!

Info

Comment

Waterfall armoire makeover....

This week's project is a classic example of "OMG, can I really paint an antique!!!???"

This is a pretty little vintage waterfall armoire I picked up at an estate auction a few weeks ago. It wasn't in terrible shape, but it really didn't have a lot going for it aesthetically...kind of plan and boring!

It did have some really pretty bakelite hardware, which is classic on waterfall pieces. The problem was the condition of the hardware. One was completely missing the bakelite, and the other three were broken and chipped....pretty much unsalvagable!

The "design" on the top drawer was not a true inlay...and the general construction was pretty simplistic. I did a little research online to make sure it wasn't something of great value! Sometimes, when there are no makers marks, you just have to make a judgment call on the value as a "restored antique."

In the end, I decided to give the piece a little KTSP treatment and give it a new life. Hopefully it will make a perfect little dresser/storage cabinet for someone!

I removed all the hardware, taped and papered the drawers and insides and sprayed it down with Kilz. Since one of the pulls was toast, I puttied the holes so I could add a single pull. After sanding it smooth and wiping it down with tack cloth, it was time to paint.

Unfortunately, it is that time of the year when temperatures don't always cooperate. So I had to haul everything into my dining room and use a brush and roller instead of spray paint.

No biggy IF you do it properly...make sure you use a quality brush, a 4" foam roller and add Floetrol to your latex paint! (Penetrol for oil based) The additive will give your paint a longer dry time and more time to "level," eliminating brush and roller marks.

I found a pretty blue and tried it on the drawers..ummmm...no. Too babyish. So I mixed a little black in some green and came up with a greyish-green I kind of liked.

I removed the broken bakelite from the pulls and sprayed them with metal primer then sprayed them with gold paint. Kind of pretty!

All in all, it turned out kind of cute. While it was a nice "vintage" piece, I think the paint and new hardware gave it a nice little "update" and a chance at a new and useful life....

If you are certain a piece is not a valuable antique, don't be afraid to give it a little face lift!

As I mentioned last week, I have been working on reupholstering the club chair and ottoman in the living room. Unfortunately I had to order a little more fabric so HOPEFULLY I can finish it up this week and share next week!

Until then....