Another MCM dresser makeover!

This is not a dresser…this is a chest of drawers. I think there is often confusion, and I am the world’s worst at referring to a chest of drawers as a dresser.

There is a difference!

But seriously who cares…lol!

Regardless of what you call it, it was A MESS! But oh the potential.

My very first love…MCM pieces. It would take a month of Sundays to link to all the MCM pieces I have refinished…just search MCM or mid century on this site. Truth be told I would have kept every one of them if I didn’t have a fear of being featured on Hoarders. So I find pieces I love, give them a good little makeover and am sincerely happy when someone else gives them a good home.

In spite of all it’s flaws, I loved this piece. It had the normal wear and tear, a seriously cruddy finish, a chipped wood handle (aren’t those wood handles AMAZING!!!!) and what I THOUGHT was some stains around the hardware on the top drawer…turns out it is a beautiful wood inlay. But you couldn’t really tell because the finish was so icky. (The missing knob was in the drawer…yipeee!)

Let’s be honest, we will all have a pretty worn finish after 60 years on this earth!

My first thought was to paint the wood handles an accent color so I could repair the chip. My daughter suggested I just strip them first. So glad I listened to her. I used this process to strip the drawer fronts, handles and legs…the old stain came off the wood handles and revealed a beautiful white wood (oak, teak? Couldn’t tell)….LOVE!!! I sanded the chip down…and you know what, I can live with it….it is obvious it isn’t the way it is suppose to be but HEY…this is a vintage piece and vintage pieces are going to have a few boo-boos!

The drawer fronts and base were stripped and oiled, the cabinet was given a KSTP treatment (Kilz, sand, tack and painted with white high gloss enamel)

(After I took the pictures, I saw the VERY fine over spray on the top drawer…curses…a little mineral spirits cleaned it right off!)

Personally, I love the high contrast of the wood handles and walnut veneer. The Lane Acclaim tables I collect have the same stark contrasting wood detailing when I refinish them…LOVE!

Often vintage pieces would have been stained and finished so all the differing woods and the entire piece had a “uniform” look and the grain detail was toned down a bit. I say LET IT SHINE BABY!!! If you are a “purist” and want vintage pieces to reflect their original state, you probably don’t want to use the processes I use to refinish pieces!

I am all for exposing the grain and the natural color of the wood.

And I am all for bringing the old pieces back to life!

Info

Comment

Another antique chest makeover...

I promised last week to share all the dresser and chest of drawer makeovers I have been working on. This time of the year it is tough to get a lot of work done over several days because of the temperatures…fortunately this dresser was one I could work on inside.

Takes a little “strategizing” to figure out what I need to do outside on warm days and what can be done inside on cold days.

I knew I was going to paint the cabinet so I managed to get it (and a few others) Kilzed on a warm day. I try to avoid using Kilz inside because it is SUPER stinky…and I like to use the spray kilz on smaller pieces and that can’t be done inside. Sanding and wiping with tack cloth can be done when it is a tad colder so no biggy. I had to strip the drawers and top outside, but that can be done in the cold as well. I was able to bring everything inside to oil the drawers and top and paint the cabinet!

Again, this one didn’t need any major repairs…the only real boo-boo was one missing handle. This hardware was one of the most unique I had ever seen….not only the style but the fact that it was installed “vertically” vs. “horizontally.” Different…I like…so I was determined to use as much of the original hardware as I could.

I removed all the hardware. First I primed them with “metal primer” then I sprayed them with black lacquer.

Since one of the handles was missing and I knew there was NO way I was going to find a replacement, I decided to remove the handles on the top two drawers and replace them with knobs.

That meant the holes in the top drawers had to be puttied…and there is no good way to “disguise” putty holes without painting…but the wood on these drawer fronts was so pretty I really didn’t want to paint them!

The drawer on the right has been stripped…the drawer on the left has not. I just love how “clear and clean” the wood looks after removing the old finish (I used THIS process! Super easy!)

I decided the best way to disguise the puttied holes was to paint a stripe down the drawer fronts. I did this BEFORE applying the tung oil finish.

The stripe needed to be pristine…absolutely NO bleed through…and we all know how tough that is! I read a few tutorials on preventing that…some suggested using modge-podge…one suggested using caulk. I went with the caulk suggestion and it worked like a charm.

I used blue painter’s tape to tape off my stripes, then I ran clear LATEX (NOT silicone) caulk along the edges of the tape….

Then I used my finger to “mash” the caulk along the edge of the tape and wipe off any excess. WORKED LIKE A CHARM! Zero bleed through! I used clear caulk so any caulk that bleed through didn’t show!

I painted the stripes and cabinet. I used a grey latex I had on hand. I added Floetrol…ALWAYS add a paint additive…Penetrol for oil based paints, Floetrol for latex. I use a 4”foam roller and a high quality brush to minimize brush strokes and roller marks. And again, always apply 2-3 LIGHT coats to avoid drips and runs. I oiled the drawer fronts and top with 3 coats of tung oil finish (sand and tack between coats), drilled new holes for the knobs and reattached all the hardware and PRESTO!

Cute as a bug’s ear and super simple!

I just love bringing these pieces back to life!!!!

Info

Comment

Armoir makeover....

Occasionally I find a piece I really love. This armoire is one of those pieces.

I obviously don't have room for it in my home, but it is a very unique piece that could serve a number of purposes in a home...dresser, kitchen pantry, tv cabinet or even bathroom storage!

In it's original condition it wouldn't have been difficult to over-look. But this is one of those times one has to look beyond the years of neglect and abuse and know that it can be made beautiful and useful again!

Again, I have to have my "wood fix" so I decided to strip and refinish the top. I stripped it using this process and then topped it with tung oil finish. I love how removing all the old "muddy" finish revealed a very unique and beautiful walnut veneer! Seriously, this took minutes...don't miss out on uncovering a piece of "art" just because you think this will be a difficult task and do not use the wrong process (like sanding!)

I had originally planned to paint the inside, but after stripping the drawers I decided the mahogany was just too beautiful to slather in paint so I decided to strip and oil it as well.

The veneer doors and sides weren't anything to write home about. A little "chalk paint and distress" treatment brightened the piece and gave it a much needed "update." This "farmhouse" look isn't exactly my style but it really brought this cabinet into the 21st century!

In the end, a simple makeover made all the difference!

This week has been "project" week for me. Usually I take inventory of what needs to be done and then make a plan for how and when....again, I use an "assembly line" process when I have a lot to work on! Tuesday was sand, repair, build and prime day. Can't paint when saw dust is flying all over the place. Today I will sand the primed pieces and chalk paint a few. I like to let the chalkpaint cure a few days before I sand...I have found that the paint "distresses" rather than peels when it has cured well!

Off to work I go!!!!

Info

Comment

Bedside table makeover....

I spent several days this week projecting on a few pieces I picked up at auctions, as well as a little project here at the house.

I can't wait to share the home project...but I will have to. Even veteran DIYers flub every blue moon! In this case, I neglected to get a quote and delivery time frame on a "simple" piece of glass. Let's just say one should not fall in love with something if they have no idea how much it REALLY cost. I should know better...but by the time I called and got an estimate, it was too late. The vision was set and the damage was done!

I will have to wait until next week to share this AWESOME project....and in the meantime I will have to live with a big hole in my utility room door...stay tuned! (no it is not a doggy door!)

So this week I will share one of the little projects I managed to get done. I usually wait until I have 3-4 pieces to work on before I drag out the stripper and paint! Normally it is easier but it is just soooo hot! Working all day in the garage can really be draining!

Last week I bought these two little bedside tables at an auction.

Dark, dated and the drawers were a little wonky. But overall they were in pretty sound shape.

The drawers were an easy fix...the metal glides were a tad bent so I took a pair of pliers and straightened them out...perfect.

Usually I paint the tops of these pieces, but this time I decided to try stripping them...what harm could be done? Sure enough, the old poly finish just melted off (using this process!) leaving a beautiful wood veneer top perfect for a little walnut stain and tung oil finish.

I painted the existing brass hardware with a gold metallic paint. I gave the drawers a little KSTP treatment with a pretty "teal" spray paint, chalk painted the cabinets and distressed them a bit before sealing with a spray poly.

Cute as a bug's ear!!!!

These little tables fit perfectly in my commitment to stay "small." They still take a little time and energy, but they are MUCH easier to move around than the bigger pieces!

And this is just ANOTHER example of how you can take a dark, dated, wonky piece of furniture and give it new life!!!

Info

2 Comments

It is time to scale down!!!!

I have made some hard decisions regarding the direction of my "rehab for resale" projecting. For years I have tackled anything and everything...large buffets and china hutches and major upholstery projects Pieces like this that I didn't even take decent pictures of and share!

I made little chalkboards out of the doors!!!

These pieces are big and bulky and take a lot of time and muscle.

Upholstery pieces (like this precious barrel chair) take a lot of time and material. On major upholstery projects, I barely get my money back on the materials, let alone my time. (If the cost of having something reupholstered knocks your breath out, try it sometime!)

And while I love doing what I do, I can't keep GIVING things away when I have so much time and money invested! (Ask my neighbors...if they say they love something, I usually give it to them!)

So...the big decision. From now on I am only going to do "smaller" pieces...little tables, wooden chairs, a few stools here and there...maybe a few dressers and such. And of course my first love, mid century pieces...big or small!

This table was a tad bigger....my neighbor bought it at a garage sale and wanted to know if I wanted to tackle it!

I love the old mahogany furniture and I love pieces that allow me to preserve some of the natural wood and still update with a little paint.

I removed the sides of the top that fold down and filled the screw holes with toothpicks and wood glue so the screws would reset tight. I STRONGLY suggest you do this EVERY time you remove old screws (it is also a great tip if you have a door hinge screw that is loose or stripped!) Takes very little time and will save you a thousand frustrations!

I stripped the top with 1/2 acetone and 1/2 lacquer thinner (see a full tutorial here!) and then applied 3 coats of tung oil finish. No stain...that is mahogany it all it's naked glory! Just breath-taking!!!

I cleaned the base with ammonia and water and then mixed up a batch of "plaster paint" with a "sample" paint from my den makeover. A little distressing and then sealed with spray poly.

This table is perfect for a small space but can easily be expanded if you need a bigger table!

Again, not really "my style" but the color is all the rage right now....evident by the fact that it didn't last a week. And while it was a "hot mess" when I got it, I loved bringing it back to life. It was a very enjoyable piece to work on!

And THAT is why I do what I do. "Finding the treasures" lurking under years of neglect and abuse.

It really is what I love to do! So I will continue to do what I love to do but I am going to FORCE myself to stick with the smaller pieces that allow me to enjoy my work without breaking my back!

We'll see how long this lasts!!!

Since I have posted a recipe in a while, I thought I would share a new roast recipe that is. to. die. for! Check it out here!