Dining room table makeover and my recent angst!!!!

Choosing fabric for a piece for "resale" is a tad easier for me than when I have to make a decision for my own home! It is still a struggle, but not nearly as difficult as choosing a fabric for myself.

Primarily because I know how much work goes into reupholstering a piece and I know if I go too "trendy" I will end up having to redo it in a few years. It is one reason I "stay safe" with bigger pieces like couches and chairs...then I use throw pillows, blankets and rugs to pull in the "in" colors. Those things are easy to change...and I don't cringe too much if I have to donate a $15 pillow vs. a $2000 couch!

Example...I bought this ugly table and chair set at an auction....

In this condition, not appealing in the LEAST and not fit for any space...very dark and dated! But this is the kind of thing I know I can work a little "DIY magic" and make it perfect for another lifetime of use!

Not that I don't struggle with deciding paint colors and fabric for these pieces...this one sat for a while. I knew I would have to paint the top...it is laminate so it couldn't be "refinished." The legs on the table and the chairs are solid wood and in halfway decent shape but the vinyl brown seats had seen better days....that had to go!

I chalkpainted and distressed the table legs, primed and painted the top a flat black and painted the chairs a "steel blue." I found an awesome black/grey tweed upholstery fabric for the seats.

I saw several tables on Pinterest with this upholstery nailhead detailing and knew immediately I wanted to do it when I found the perfect table...and this table is perfect!

That little detail really makes all the difference, was relatively inexpensive (about .50 each!) and was not difficult. I just measured and marked where I wanted each nailhead to go, drilled a tiny hole, then hammered them into place! Cute as a bug's ear!

Obviously someone else thought it was cute as a bug's ear...it sold the day after we took it to 410 Vintage.

Which brings me to my recent angst! Chairs for my own home!!!

When I remodel my den last year, I knew I wanted to add a teal club chair. I bought this little MCM style chair a year ago and it has sat in my den since, waiting on time and inspiration! It is the perfect size and style for this space, but of course the upholstery is all wrong!

I finally went to the fabric store last week and pulled a bunch of fabric samples that caught my eye. I THINK I have decided I like this teal tweed fabric. This fabric works well with the style of the chair and is pretty much the color I was leaning towards.

I found this chair just last week and I THINK I want to use it to replace my big fat leather chair in the living room!

It is a tad more "traditional" than what I really like but that is okay...again, that is the great thing about having a mosh-pot of styles...or "eclectic" as they say!

One of the reasons I want to replace this chair is because it has become "the dog's chair." In other words, Cleo has claimed it as her own. She sleeps in it, sits in it and jumps on it when anyone comes to visit her (and EVERYONE is coming to visit HER!) As a result, it is in pretty bad shape.

So naturally, she has to check out the new chair to make sure it is comfortable FOR HER!

Not nearly as roomy as the leather chair, but she looks pretty comfy!

Again, fabric samples and nail biting choices....

I kinda sorta like the idea of doing a "two fabric" design. The grey geo on the sides and back, and the black for the cushion. But then again, I worry about being "trendy" with something that is going to require a lot of time and work, so I am leaning towards the simple, one fabric choice in blue.

What to do, what to do. For now I am taking my own advise. Looking to Pinterest and Google search for "inspiration." Looking for chair upholstery I LOVE that will work with this style and in my space!

It is the ONLY way I know how to make a decision and know it will be one I will be happy with for many years.

Info

Comment

Mid century chest makeover....

On rare occasions I find a little treasure hidden among all the garbage my tenants leave when they move in the middle of the night! I found this little table years ago and it started my love affair with Lane Acclaim tables....

It did NOT look like this! I remember I picked up the nasty little thing and started to toss it in the back of my truck. But it was sturdy and I could see quality through all the "muck" so I brought it home. I googled the markings on the underside and found that it is a walnut and oak Lane Acclaim table manufactured in 1959. With a lot of elbow grease and a little tung oil, it is now one of my favorite little "treasures." Along with the others I have purchased and restored over the years. Still waiting on the desk and a round end table...but someday...

Now I look at furniture I find a little closer.

This dresser is one of my recent finds. A true mid century piece. Completely intact and sturdy as the day it was built. Unfortunately someone had done a REALLY bad job painting it!

I cleaned it, primed it with Kilz, sanded it and wiped it down with tack cloth....then I painted it with one of my favorite flat "charcoal" greys. The ole' KSTP treatment! The drawers were in mint condition and just needed a little cleaning!

Beautiful! Because of the style, I kept the finish simple. While I hesitate to paint MCM pieces, this is a prime example of "enhancing" a piece.

Now I am going to share a little DIY frustration because I know I make this stuff LOOK easy sometimes. I first painted this entire piece with several cans of Valspar flat spray paint. I like spray paint because I normally get a nice smooth finish. For some reason I kept getting that "stripped" look on the top and sides...the drawers looked fine. Not a problem I normally have with flat finishes when the temperature is decent. I ended up buying a quart of latex flat paint, mixed to match, (and added floetrol...a must!) and used a 4" sponge roller to get a uniform finish. Worth the extra effort!

I know I have said it a thousand times....don't overlook those "ratty old" pieces.....neglected or abused or poorly "restored." With a little bit of your time and attention, they can be beautifully restored and ready for another lifetime of use!

This week I will be sharing this project at...

...love their features and their site!

Info

1 Comment

Updating a little chandelier...

I am almost embarrassed to admit where I got this ugly little brass chandelier....

Out of the back of a strangers pick up truck at the dump. Seriously...I was paying out at the local dump and this guy drove up in a truck loaded with trash. Sitting on top was this light fixture. So I asked him if I could have it...and he said SURE!

Geez...I have become one of "those" people who dig through other people's trash! Crazy cat lady, annoying coupon lady...and now this...(shaking head in disgust)

Whatever...I wasn't sure what exactly I was going to do with it but I knew it could be "updated" if I could just find the right inspiration. I knew I was going to paint the dated brass, so I decided to start there until I could figure out exactly what I wanted to do with the fixture!

Originally I primed it with metal primer, then started painting it with plain ole' off white spray paint. (Remember, when you aren't sure what to do with something, take it to "base neutral.")

And that is when a little DIY project turned into a total disaster. Yes, it happens. Even to me. Even though I shook the spray paint can per the instructions, it still started spraying all "clumpy." I don't know how to describe it, but rather than a nice smooth finish, it was all grainy and rough....AAAAGGGGGHHHHH!

Made me so mad I tossed the fixture in the back of the garage and said "SCREW IT." (Yes, I curse at innate objects!) I knew I was going to have to completely sand it down and considering the "ornateness" of it, I knew it would be a royal pain. My "vision" was just a heap of "mess."

Then I saw this on Pinterest...

Andrea at "Personally Andrea" took a plain ole' chandelier and dolled it up a bit by using jute twine to wrap the ugly little plastic tubes.

Hum....just the "inspiration" I needed to dig the "ruined" chandelier out of the back of the garage and give it another shot!

I sanded down the "grainy" finish, reprimed where needed and then painted it in my current favorite teal spray paint! (This time I shook the crud out of the can AND test sprayed it!)

Covering the ugly plastic tubes is super easy. Andrea used tape, but I used hot glue. I ran a little line of hot glue along the tube as I wrapped it in the jute twine.

WORD OF WARNING!!! Hot glue is HOT...and the plastic sleeves are a tad flimsy so use the glue sparingly or you will actually melt the little tube which will make it impossible to slip back onto the light. (Lesson learned the hard way...fortunately Lowe's sells replacement socket covers for under $3 a pair!)

I think painting the fixture in black or oil-rubbed bronze would have made it a little more "formal." But I was going for "fun" and "hip" and a little more casual!

I liked the look so well I decided to do the same to my dining room fixture using the plastic covers I purchased at Lowes!

I found some glittery gold fabric/paper kinda looking stuff at the craft store that I am going to use to cover new socket covers for the Christmas holiday! I will share that later when I do my Christmas decorating!

Don't turn your nose up at the dated brass fixtures...as I have shared many times fixtures, lamps and fans are super simple to update with a little paint.

And of course a little inspiration! Thanks Andrea!

Info

4 Comments

Sewing table....

I have shared this project before but with sewing and upholstery projects lined up on the dining room floor, it deserves another feature!

After a few weeks of working non-stop at the apartments, I finally have a little time to tackle the growing mountain of projects in my garage. Yesterday was spent prepping, priming and painting.

There has been a real "chance" of rain predicted for today all week and Mother Nature did not disappoint. Rain. Lots of it. So today, with the rain preventing me from getting out and finishing up those projects, I decided it was time to tackle one of my LEAST favorite aspect of DIY projecting!

Sewing...my nemesis! But it is an (evil) necessity if you are a DIYer! Just too many little projects require, at the very least, a straight stitch. The simplest upholstery projects, decorative pillows and curtains require the service of a sewing machine!

As I mentioned in this post, it is important that I have a way to store and use my little portable (and very old) sewing machine! Nothing fancy...pretty much does just the basics...straight stitch, zig-zag, button holes (which I NEVER use!)

This little portable table has been a life saver!

This was a little rusty typewriter table I bought at an auction...you can see how I dealt with the rust here and brought it back to life with a little TLC. I use to set my machine on my dining table, risking scratches and damage to the table and limiting where I could work on my sewing projects!

The portability of this table make it super easy to store it in the laundry room cubby!

As I have mentioned before, if you don't know how to sew, learn the basics! Take a class at your local hobby store or have a friend teach you! It isn't difficult and again, definitely necessary!

Info

1 Comment

Old shop cart transformation....

Sometimes you have to look really hard to see the treasure lurking beneath all the gunk and layers of paint.

This piece is a prime example....

I bought this old shop cart with metal castors at an auction several weeks ago. It was covered in decades of grease, grime and several layers of paint. My original plan was to clean it up and fix it up a bit to be used in a shop.

After a good scrubbing, I began stripping the top with my favorite finish stripper.... 1/2 acetone-1/2 lacquer thinner. My original intent was to completely strip the top and then apply a stain and poly.

After stripping off a majority of the top paint layers, I started sanding....and that is when I discovered that this table didn't want to be hidden away in an old shop...it wanted to be a beautiful butcher block island!

(I apologize for the pictures! I had fully intended to take it in the house and stage it all pretty...again, more doing, less froo-frooing! These were taken with my phone after I took it in to my booth!)

Even after stripping and sanding, the grain of the wood held onto an amazing "patina" that was so warm and beautiful I decided to leave it. I applied 3 coats of butcher block oil to hydrate and preserve the wood. No stain...this is just the natural color of the aged wood that was hiding under the layers of gunk and green paint!

I applied a chalk paint treatment on the base and distressed it a tad so the green "peaked" through a tiny bit. After painting and distressing, I sprayed it with poly. Again, poly tends to "yellow" a tad which gives the new paint an aged look, as well as seals! The inside of the drawer was pretty nasty, so I scrubbed it with ammonia and gave it a KSTP treatment!

This is not some fancy antique...just an old shop cart made out of pine. But it is absolutely beautiful and I think after years of being hidden away in a shop covered in gunk and grease, it deserved a little love! I honestly would have kept it if I had a place for it!

Again, don't turn your noise up on a piece that has years of neglect and abuse. Maybe, just maybe, there is a beautiful "soul" just waiting for you to reveal!

Info

4 Comments

Fun and quirky pumpkins and fall in the Ozarks!

The high Saturday was in the low 70s!!! Fall is in the air! But as always, the "early fall" was fleeting and this week we are back in the 80s. Cruuuuud!

I want desperately to break out all the fall decor but I will wait! I usually decorate right before we head out to Colorado...after a trip to the mountains and a week in the glorious Aspens, it will officially be fall in my mind...regardless of the temperatures!

I have been tweeking a few things in preparation for fall decorating. I picked up a few boxes of holiday knick-knacks at an auction a few weeks ago and found four really cute ceramic pumpkins and two wooden pumpkins.

As much as I love the fall colors, I decided I have WAAAAY too much orangey stuff so I decided to get a little creative with these.

Metallic gold? Hum...interesting.

Maybe white pumpkins?

Candy corn pumpkins? Kinda like these little jars I made a few years ago...super simple and a quick, quirky update to otherwise boring pumpkins!

Dunno...I have a few hundred pumpkins stored in the attic so I will see how these mesh when I finally drag it all down and start setting it up! The great thing about hitting the clearance sales after the season (besides the great savings) is all the wonderful surprises I find the next year!

A few years ago I shared a tutorial for making fall floral urns! Now is the time to get busy and make a few of these! This is the perfect way to use old pumpkins and garland you have grown tired of and no longer want to decorate with!

For me, decorating for fall is a two day process....seriously, I have THAT much! Insane!

Fall in the Arkansas Ozarks can be amazing! One of the greatest traditions in our area is the Fall Craft Fairs, anchored by the War Eagle Mill Craft fair! This year the fair will be October 15-18.

My advise for attending this event....go early to avoid traffic...wear comfortable walking shoes...come hungry (OMGosh the food is amazing!)...and make sure you clean out your trunk!

Not sure if you can even book a hotel in this area at this late date, but even if you hve to stay 1-2 hours away, it would be worth it.

War Eagle is not the only craft fair in the area...Northwest Arkansas will be covered with craft venues and the local papers will print maps of all the places where you can literally get lost ALL day just browsing and buying and filling your head with all kinds of inspiration for the holidays and home decorating.

Since I DIY almost everything, I rarely come home with a lot of "stuff" but I do come home with a head full of inspiration!

If you don't have anything planned for that week and want to take a little road trip with your girlfriends or family, I can promise you will have an amazing time! And maybe the trees will cooperate and you can see the glory of fall in the Ozarks!

Info

Comment

A marvelous mid century lamp!

Week three of waiting on the trim for the kitchen. Now I think I may just wait until I get the new doors with glass inserts installed before I do a full reveal...at the rate I am going with the trim, the doors will be here about the same time! Curses...

SOOOOO, in the meantime, I want to share a darling little lamp I picked up at an auction for next to nothing. I probably would have paid a little more for it since I knew the minute I saw it, I wanted it.

Why you ask? Let's be honest, it wasn't much to behold in it's "before" state. But what 50-60 year old piece ever really is! That is the great thing about learning to DIY anything...you can always take a $1 find and give it a good little makeover.

What drew me to this piece originally was the style. TOTALLY different than anything I had ever seen and definitely leaning towards the "mid century" style. My true love. I tried to find one similar...I Googled "mid century wood brass lamp"...."walnut brass lamp"..."atomic lamp." I found a few "similar" but nothing close enough to consider a hit.

Less the dreaded "oops," this little lamp didn't take a lot of work. I stripped the wood with the 1/2 acetone-1/2 lacquer thinner...that took all of about 5 minutes! I taped off the wood, cord and the sockets, gave the old copper base, finial and sockets a coat of metal primer, light sanding with steel wool, tack cloth, and a couple of coats of gold metallic spray paint! (The "oops" was my impatience which resulted in the need to completely strip the base and reprime and paint the entire thing!)

Did you know you can easily paint brass...yep...just prime it with metal primer and then paint it any color you want. Have an old brass lamp your mom gave you or you picked up at the thrift store. PAINT IT!!!!

I am slowly coming to terms with gold metallic accents and honestly, I'm kind of digging it! I even painted some ceramic pumpkins with gold metallic for my fall decor!

After the paint dried I applied a couple of coats of tung oil finish to the wood. New lamp shade from Hobby Lobby (40% off...yeah!!!!) and it is ready for another lifetime of use!!!

What is that blue "dish" you asked? I found it in one of the cabinets when I was purging my kitchen...a true gem! (My son would have been 12 when he made this!)

As I mentioned here, I think it is important to decorate with things you love and with things your children have created!

Fortunately, the wiring and sockets were in great shape, but seriously no biggy if an old lamp needs a little rewiring. Here I created a new light fixture out of industrial-type fans, but the general steps for rewiring a lamp would pretty much be the same!

If you are tired of your old boring lamp, paddle fan, or light fixture, check out these posts for just about any lighting project. Fairly simple projects that help you update ANY fixture or "lighten" a room without breaking the bank...because let's be honest...brand new lamps, light fixtures and paddle fans can be expensive.

Installing a new light fixture

New outdoor lighting

Painting designs on light or lamp shades

Painting light fixtures and paddle fans

Adding under counter lighting to the kitchen

Painting a brass lamp

Rewiring a fan or appliance

There are so many ways to change and update lighting! And super simple! Give it a shot...again, what's the worst that can happen. You still hate it and you still won't get more than a couple of bucks at a garage sale for it!

Also...a quick reminder! I have mentioned before that if you aren't sure what to do with something, take it down to "base neutral." In my case I have a garage full of projects I haven't decided what to do with yet. But I know one thing for certain...it all has to be repaired, primed and sanded. So yesterday, that is exactly what I did with a wood stool, 2 chests, 1 dresser, a ratan shelf, a few frame shelves and a set of ratan chairs. THIS is "base nuetral".....

Now that it is all prepped and ready for a new look, I am ready whenever the "creative bug" hits!!! If a piece of furniture has got a bad case of the "uglies" and you just don't know what to do with it, just remove the hardware, prime it, sand it, and eventually inspiration will come!

Info

2 Comments

Rewiring an old fan and my home's 15 seconds of fame....

The trim pieces for the kitchen still have not come in so as much as I would love the share my kitchen "reset" I am going to hold off until it is ALL done. I did share the construction and addition of the floating shelves last week, and you can check that out here.

This week I want to share an easy little project that I incorporated into my kitchen.

I have always wanted a fan in my kitchen...especially now that I am at the age when sudden bursts of "heat" wash over me (some call them hot flashes...but those are for old women!) A paddle fan isn't really a good idea in the kitchen, especially if you have a gas range like I do.

Over the years I have bought several "vintage" and "antique" fans at auctions. My favorite was a teal fan I had in my room for months...but as with a lot of things, it eventually went to the flea market and was sold...darn it! NOW I have the perfect place for it!

A month or so ago I picked up two antique fans at an auction...one a Westinghouse and the other an Emerson. I did a little research and found that both were from the 1930s. One had a decent, intact cord on it so I tested it and it worked beautifully after it was cleaned up and oiled. The other had a pretty ratty cord and there was NO WAY I was plugging that sucker in!

I took the working fan to my booth and kept the one that had the ratty cord. Since it had the "least value" and was a tad smaller and lighter, I decided to keep it and replace the cord!

The first thing I had to do was give it a good scrubbing. Most of the fans I have bought have been pretty nasty. Straight ammonia and steel wool! Not fun but necessary. Then I spritz all the insides with WD40.

Replacing the cord on any appliance, especially these old fans, is not difficult. If you can open it up and find the electrical connections, its pretty simple. These old fans have a few screws holding the baseplate onto the base of the fan...just remove the screws and remove the base plate.

Make sure you note where the old connections are....you want to make sure you hook up the new wiring properly. Occasionally, I will use painter's tape to actually "label" the posts or wiring so I don't forget...or better yet take a picture of it.

(Disclaimer...I actually used an old extension cord I had stripped to make sure the fan actually worked before I invested in a new cord! No sense in replacing the cord, only to discover that the fan motor wasn't working!)

Once I opened it up and got a look at the connections (and cleaned it up a bit...ewww), I purchased a new cord and electrical connectors at Lowe's.

The replacement cords have two bare wires on one end and a plug on the other. Just "crimp" the connectors on each wire and then attach the new wiring to the fan (or appliance) like the original wiring was connected. In my case, one wire went on one bolt and the other wire went on another bolt...then just tightened with a nut and washer...simple simon!

Then reassemble the fan. On this fan, it was just a matter of putting the base back on!

This fan is a little "vintagey" for my decor tastes, but I like that it adds just a touch of "eclectic" to this space. And as with everything, it will serve a great purpose when those heat waves hit!

COMMERCIAL SHOOT!

A few weeks ago, an old classmate of my son posted on Facebook that a producer he works for needed a fireplace to use in a photo shoot. Hey, I have TWO fireplaces...sweet!

I thought "photo shoot" meant they wanted to come take a few pictures. Um, no. Verge Videos is currently shooting a commercial for Dayspring Greeting Cards in my den. And since it is a Christmas commercial, we had to haul a bunch of Christmas decorations down out of the attic to "stage" the shots!

I know several bloggers who have had to decorate their house for Christmas in JUNE for magazine shoots! Pish-posh...not happening...and now it is!

Truth is, it is fun to watch all the work (and mess) that goes into making a simple little commercial! Lighting, props, hair and makeup...the whole shabang! Super cool process!

I have no idea if this is a local or national commercial. Doesn't matter...my house is officially a "pro" and will get it's 15 seconds of fame.

Info

5 Comments

THREE different Floating shelf tutorials...

I am going to wait to do a full reveal on my kitchen "reset." I call it a "reset" because I didn't paint the exterior of the cabinets or get new flooring or counters...just moved cabinets around, removed a few doors, painted the inside of a few cabinets, added some under-counter lighting and added shelving. So while it is a major change, and looks and functions MUCH better, it isn't a full-blown makeover.

Today I am going to share a tutorial on floating shelves. Actually THREE different tutorials!

The first thing I had to do was figure out which cabinets I wanted to "pop up" and where I wanted open shelving. That was what all the planning and measuring and drawing has been all about for the last few months. After I decided on the "configuration" of the cabinetry, I moved the cabinets that needed to be moved (see a tutorial on doing that here) and decided what "stuff" I wanted on each shelf...that is an important part of the plan because you don't want to plan on storing a 10" tall Anchor Hocking jar on a shelf that, in the end, only has 9" clearance!

The problem with adding floating shelves to any room is the need to plan for the weight of the items it will hold and whether or not there are studs to anchor the support.

In my kitchen, I had four areas I wanted to add floating shelves. I didn't want brackets, so the "support" for each shelf was a huge issue. In the end, I had to construct and anchor three different types of shelving to give me the clean look of floating shelves!

The first area was the hardest only because it was the longest span and will hold all my dishes. When I weighed my dishes they came to SIXTY FOUR POUNDS!!!! Just for plates, bowls and salad plates....that didn't account for cups, glasses or condiment bowls! Course then it dawned on me that I really didn't NEED to display ALL my dishes so I pulled out 8 place settings and stored the rest above the pantry! Not a great place to store something you use every day, but perfect for things you only need a few times a year! I actually have MORE of these dishes in my hall pantry...they are Pier One Bianca ironstone and they don't make it any more...so I stock up every time I find them on Ebay or Etsy!

The two shelves were still going to hold a lot of weight and I knew I needed something sturdier than a pre-build floating shelf you buy at Lowe's.

The wiring is from my under counter lighting that was attached to the cabinet! Notice the black piece of electrical tape on the switch so someone didn't accidentally flip that switch!!

I found a tutorial online for floating shelves using metal brackets attached to the studs by cutting out the sheetrock. God help me, I did not save the link! Since I knew what I needed to do, I didn't need to refer back to the tutorial! Hopefully my tutorial will give you the information you need!

My plan was to attach L brackets directly to the studs and then conceal them with sheetrock and the construction of the shelf!

The first thing I did was locate the two studs with a stud-finder. I marked the location, used my L brackets to "trace" out the area I needed to cut out and then cut out the sheetrock.

You can use a Dremel with a cutting blade but I didn't want to blow dust all over the place. I just cut it out with a utility knife and chisel.

After cutting out the opening, I set the L brackets directly on the studs, made sure it was level between the brackets by laying a 24" level across the two, predrilled the holes for the screws and then attached them to the studs using heavy duty wood screws...3/8" bolts will work as well!!!

You may notice that the brackets are set 1/4" above the top of the tile...that is because the underside of the shelf will be 1/4" plywood and I want to be able to slip it on top of the tile. Someday I MIGHT change my backsplash and I want to be able to remove the tile without messing with the shelving!

After the brackets were attached, I used sheetrock mud to fill in the holes...right over the bracket attached to the studs. You could "patch" the area like I showed you here, or you can just fill them with mud. As the mud dries, it will crack, and you may have to sand and refill it 2-3 times...no biggy....I had a lot of stuff going on over several days so I wasn't in a hurry!

After the mud dried, I sanded it well, sprayed it with texture (again, this tutorial shows you how to do that) and then painted it (AGAIN, this is where having leftover touchup paint is SO important...unless you are repainting the entire wall!)

Here is the downside to doing tutorials...I don't always take the pictures I should take! Sooooooo......try to follow me here. The shelf was pretty much constructed the same way the shelves adjacent to the refrigerator were...so you can see pictures of the construction later in this post!

I cut, primed, sanded and put one coat of paint on all the shelving components before I put them together...that way, once it was all constructed all I had to do was caulk, putty the holes and give it one final coat of paint! (I used oil based paint on the shelves...maybe overkill but I know it will hold up!)

I used 3/8" plywood for the top of the shelf...I cut it (and the 1/4" ply for the underside) the size I wanted the shelf, LESS the 1/2" for the strips of wood used to face the front and both sides (Example, if you want your shelf to be 8" deep and 30" wide, you would cut your plywood 7 1/2" x 29"). I glued and nailed 1/2" plywood strips to the underside of the 3/8" top to create a "channel" for the electrical cord for the under counter lighting and for the bracket. I laid the 3/8" plywood across the two brackets and attached the top to the L bracket with #10-3/8" screws and then glued and nailed 1/4" plywood to the underside. So all in all, the thickness of each shelf was 1 1/8" thick (3/8" top + 1/2" inside strips + 1/4" underside = 1 1/8" thick.)

I wanted to reinstall my under counter lighting to the bottom shelf so I measured for it's placement and drilled holes for the electrical wiring in the underside (1/4" plywood) of the bottom shelf and ran the wiring between the "channels" and through the holes before I attached the bottom to the top of the shelf. KNOW WHERE YOUR ELECTRICAL WIRING IS so you don't put a nail through it when you are nailing the underside to the top!

I capped the edges off with 1/2" boards...1/2 x 2" (actually 1/2" x 1 1/2") for the top shelf with no light and 1/2 x 3" (actually 1/2" x 2 1/2") for the bottom shelf so the light fixture would not show when it was installed. Caulked, puttied and gave them one final coat of paint!

A huge advantage to constructing your own support or frame is you can make the shelves any depth you want...I actually made the bottom shelf a little deeper than the top shelf.

The spice corner was a tad easier. Since the items on those shelves were pretty light weight I used premade floating shelves. The only adjustment was the width of the shelves. The smallest premade floating shelf I could find was 18" but my space was only 15". The upside is the metal bracket the shelf slips on to was only 15" wide, so I was able to cut the actual shelf down...1 1/2" off each side, and still use the metal bracket! I painted those to match the dish shelf and installed them per the directions. (Yes, you can easily paint pre-made floating shelves...you aren't limited to white or black!)

The two 15" shelves on either side of the refrigerator were another "challenge" and constructed completely different because one side had NO studs in the 15" span and the other side only had ONE stud. Curses.

Not a biggy. Sometimes you just have to get creative!!!

I built a "skeleton" for each shelf using 1x2 material (actually 3/4" x 1 1/2") I didn't want to make the skeleton too terribly heavy but since only one side of each shelf could be attached to the adjacent cabinet, I decided to beef up the "free floating" side with a 2x2" (actually 1 1/2" x 1 1/2") I used oak on the side that attaches to the wall since it is a "harder" wood! The rest is poplar since it is a little bit lighter! Make sure when you "design" your skeleton that you account for the 1/2" "facing" that will go on the front and sides. For example, my space was 15" wide x 14" deep...since I was "facing" the shelves with 1/2" material on the front and one side, I made my skeleton 14 1/2" x 13 1/2". Sometimes it helps to actually draw it out with the measurements!

I glued each joint, tacked them with a trim nailer and then counter sunk screws...just to make it all nice and sturdy!

If you don't have a special "counter sink" screw bit, you can always cheat like I do...first, predrill the hole using a small bit (1/16th ish bit!)...

...then use a bit that is a tad larger than your screw head and drill on top of the small bit hole, maybe 1/8" deep...then just put your screw in!

It is important to predrill holes because the wood WILL split if you do not!

After constructing the "skeleton" for the shelf, I placed it on the wall, leveled it, then predrilled 4 holes through the skeleton into the sheetrock.

Notice I tacked a piece of 1/4" plywood to the bottom of the skeleton so I could maintain enough space to slip the 1/4" plywood underside on after the skeleton and top were installed!

After pre-drilling the holes through the skeleton and into the wall, I removed the shelf and inserted "self-screwing" sheetrock anchors into the wall... the package says they hold 80 pounds each...I'm hoping four will do the job since there is no stud in this area!!!

I used the screws that came with the self-drilling drywall anchors to secure the skeleton to the wall. I added washers on the left shelf since it didn't have a stud in the wall to attach to.... just for good measure!

Litty inspected my work every step of the way!!!!

The right side had one stud to anchor to, so I used two self-drilling drywall anchors (no washers this time) and two sheetrock screws into the stud. For good measure I used my nail gun to nail from the inside of the skeleton into the adjoining cabinet (making sure it was level from back to front!)...again, probably overkill!

After the skeletons for the shelves were securely anchored, I used 1/2" plywood for the top and 1/4" for the underside. Glue and a few trim nails. The thickness of the shelf is 1/2" top + 1 1/2" skeleton + 1/4" underside = 2 1/4"... so I used 1/2" x 3" boards (again, actually 2 1/2") for the front and sides (all pre-primed and 1 coat of paint). Caulk, putty, paint!

Three different construction methods...this is one of those times when one shoe WILL NOT fit all and you really have to get creative!

This may all seem like a daunting task...and I may make it seem easy. But even for me, it is not. You really have to think, and draw, and measure and plan. And be willing to throw your hands up and start over when something doesn't work the way you thought it would! THAT is what DIY is all about.

You may have noticed that since I popped up the cabinets, you can actually see the underside now...that will not do! And that is one of the pieces of "trim" I am waiting on to finish things up...1/8" maple ply that will cover the underside of the cabinets. I had David at Sherwin Williams do a stain match and he did an AWESOME job...so as soon as the trim and skins come in and I get them stained and installed, I will do a full reveal!

In the end...I have exactly what I want...open shelving in my kitchen and when I reveal the entire kitchen you will see how this all ties together. At least for now you know that you are not limited to the measly little 10 pound limit of a pre-built floating shelf! You CAN build a floating shelf that will hold more weight, anywhere you want!

Info

4 Comments

"Blah" to "BAM" cheap furniture makeovers...YOU CAN DO IT!!!

This past week I have been working on my kitchen (I told you the "small" projects wouldn't squash the urge!) I still have a few little trim details to hunt down and then I will try to do a feature next week. I had to construct three different types of open shelving and I rewired an 80 year old Westinghouse fan...AND IT WORKS!!! I'll share all that as well!

This week I want to share a few little projects that YOU can do! Do you have a piece of furniture (or two or ten) that is just "blah?" A cheap little shelving unit you picked up at the big box store and put together with the little allen wrench that came with the screws. Maybe a few ancient bedside tables you inherited from your mom. A particle board table that has seen it's better days.

I know I have harped on this before, but seriously it bares repeating! If you are just starting out, are on a tight budget, feel the need to keep furniture given to you by family, or just want to change things up a bit, you NEED to be able to do simple makeovers!

Before you toss a piece of furniture to the curb, think about "updating" it a tad. Even the cheapest, most basic piece can be saved with just a tiny bit of time and effort! As I have said time and again, the worst that can happen is you still hate it and it still only brings $1 at your next garage sale.

I find pieces like this all the time at my apartments. I drag them home, clean them up with ammonia (stinky but gets the old gunk off!) and then give them a little facelift!

This was one haul out of one unit....

The little bedside tables are the old orange maple...ugly as sin but super sturdy and solid wood! The little coffee table is one of those inexpensive "fake" wood things that comes with the little allen wrench tool for the bolts! And the spindle shelf had particle board shelving. All in all, pretty dated stuff!

This little shelf came out of another unit...

It was missing a drawer and it had a few loose bolts, but whatever...still salvageable!

I find these things in my apartments, but you can find them at thrift stores and garage sales for next to nothing!

All I did to the little shelf with reeded drawers was give it a little KSTP treatment (Kilz, sand, tack cloth and paint!

Perfect for added storage in a bathroom, kitchen or kid's room!

I decided to do something a little fancier on the coffee table and bedside tables. I striped the tops with the acetone/lacquer thinner mixture, added a little java gel stain, then sealed them with spray on poly (if stripping and staining is beyond your skill level, just paint the tops!)

The bases are simple KSTP treatment. New hardware on the bedside tables and these pieces are perfect for updating any space!

The spindle corner shelf got a simple KSTP treatment!

I don't have a "before" picture of the little chalkboard shelf. Basically it was a stained wood frame with an ugly picture of a teddy bear! Ewwwww. Gave the frame a chalkpaint and distress treatment (spray paint would work too!) and I painted the board backing with chalkboard paint. Super simple "upcycle!"

Years ago I scrapbooked all the boys athletic pictures. A chore considering they both played football and baseball their entire childhood! (I strongly suggest you do this every year rather than try to find time to do all 15 years at once!)

The square frames were a perfect fit for a 12x12 piece of scrapbook paper and would be perfect for someone who wanted an easy way to display their kid's sports pictures. I applied the scrapbook paper onto the foam backing with a spritz of spray adhesive, used a glue stick to attach pictures and KSTP the frames. This would be the perfect way to "scrapbook" photos...then you can take them out of the frame and just slip them into an album when it is time to change out the pictures next year!

Before you paint a piece, make sure all the "bolts and joints" are tight and the piece is sturdy. If tightening a screw or bolt doesn't solve the wobbles, take time to GLUE AND CLAMP whatever ails the piece. No sense in making it pretty if it is going to collapse the first time one of the kids leans on it!

All these projects have one thing in common. Spray paint. Seriously...a little primer, a little sanding and a little spray paint...and you have changed the entire look!

I have shared many of these simple little makeovers in the past! A few dressers here, here here and here. Several coffee tables here, here and here and Lord knows how many frame makeovers (here, here, and here!)

Challenge yourself. Pick out ONE piece of furniture or a frame in your house you really don't like. Go to Lowes and pick up a can of Kilz, a little sandpaper, a package of tack cloth and a can of your favorite color spray paint (total under $15) and give it a go! YOU CAN DO IT!

I promise!